Instruction/ maintenance manual of the product 275T Samsung
Go to page of 61
Install drive r Install p ro g rams SyncMaster 275T.
Notation Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment . Prohibited Important to read and understand at all times Do not disassemble Di.
This may cause electric shoc k or fire. Do not pul l the plug out by the wi re nor touc h the plug with wet ha nds. This may cause electric shoc k or fire. Use only a prop erly grounded pl ug and receptac le. An improper grou nd may cause electric shock o r equipment damage.
This may cause electric shoc k or fire. Installation Be sure to conta ct an author ized Service Cente r when inst alling you r set in a lo cation with heav y dust, high or low tempera tures, high humidity , and expose d to chemical substances and where it wil l be operated for 24 hours continuously such as at airports, train stations etc.
Keep any he ating devices aw ay from the power cabl e. A melted coating may cause el ectric shock or f ire. Do not instal l the product in places with poor ventilati on, for insta nce, a book shelf, closet, etc. Any increase in the internal tempera ture may cause fire.
Cleanin g and Usin g When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent d irectly onto the monito r. This may cause damage, elec tric shock or fire. Use the recom mended deterge nt with a smooth cloth.
This may cause electric sho ck or fire. Refer to a qual ified servici ng company. If your monitor d oes not opera te normally - in particular, if there is an y unusual so und or smell coming f rom the moni tor - contact a n authorized dea ler or the Service Center.
This may a ma lfunction , an electric shock or fire. If a foreign subs tance enters the monitor, unplug the power cord a nd contact the Service Cent er . Keep the pr oduct away f rom combusti ble chemical sp rays or infl ammable substances. This may cause an explosion or fire.
Dropping the pro duct may cause damage to the product or the pers on carrying it. Using the prod uct in a locat ion prone to vibrations may shorten th e lifetime o f the product or may cause the product to catch fire. When moving the monitor, turn off and unplug the pow er cord.
feet fall up from the f loor. Adjust the arm position so that it is below the heart Correct Disposal of This Pro duct (Waste Elect rical & Elec tronic Equip ment) - Europe only (Applicable in the .
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have an image retent ion when sw itching from one image to another especially after displaying a statio nary image for a long time. This guide is to demonstrate a corre ct usage of LCD products in order to prote ct them from Image retention.
Ex) The best way to prote ct your monitor from Image retentio n is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
Packa g e Contents Please make su re the following items are i ncluded with you r monitor. If any items are missing , contact y our dealer . Contact a local dealer to buy optional items.
Quick Setup Guide (Not availa ble in al l locations ) Natural Color, MagicTun e™ Cable Power Cord D-sub Cable DVI-D Cable USB Cabl e Sold se p aratel y S-Video Cab le RCA Cable Component Cab le S p .
MENU button [ ] Opens the OSD menu. Also use to exit the OSD m enu or return t o the previous men u. Adjust bu ttons [ ] These buttons allow you t o adjust items in the menu.
This will save power and reduce eye fat igue. 4) Custom Select this mo de when you want to adjust the image a ccording to your preferences. >> Click here to se e an animati on clip Brightness butt on [ ] When OSD is not on the screen, p ush the button to a djust brightness.
POWER : Connect the power cord for yo ur monitor to the POWER p ort on the back of the monitor. DVI(HDCP) / RGB DVI(HDCP) : Connect the DVI cab le to the DVI(HDCP) p ort on the back of y our monitor. RGB : Connect the R GB terminal at the back of yo ur monitor to y our computer.
z The Kensingt on lock is a device us ed to physica lly fix the system when using it in a publi c place. (The locking de vice has to be purchased s eparately.) For using a l ocking devi ce, contac t where you purchase it. Stand Stoppe r z Remove th e fixing pi n on the stan d to lift t he monitor up and down.
Connectin g Cables Connect t he power cord fo r your monitor to the POWER port on the back of the monitor. Plug the power cord for the m onitor into a nearby outlet. Use a connec tion appr opriate for your comput er. Using the RGB (A nalog) co nnector on the video card.
The USB port of the monitor suppor ts High-Speed Certified USB 2.0. High speed Full spee d Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps Power Cons umption 2.5W (Max., each port) 2.5W (Max., each port) 2.5W (Max., each port) Connect t he UP port of the mo nitor and th e USB port o f the compute r with the US B cable.
Connectin g a S p eake r When connecting a sp eaker, be carefu l that the grooves of th e monitor and the speaker . ( )are al igned with ea ch other. A djust the a ligned positi ons until you hear a ‘click ’. If a speak er is connecte d correctly, you can hear a ‘click’.
Connect a headphone t o the black term inal at the right of the sp eaker. Connect a micro phone to the red te rminal at the right of the speaker. By turning part ( + , - ) in the d irection shown in th e figure below, the spe aker turns on and the volume in creases.
Input devices suc h as digital D VD are connecte d to the DVI IN terminal of the monitor usin g the DVI cable. Then, start the DVD with a DVD disc inserted. Select Digi tal using the S OURCE button . Connectin g DVD/DTV Set To p Box Connect t o the DVD/DTVS et Top Box input if the device ha s a DVD/DTV conne ctor.
Stand Stoppe r Swivel stand Using ( ),You can swivel the monito r left and ri ght at an an gle of 90° to set the monitor lengthwise. The rubber und er the stand is t o avoid the mon itor slide. When you try to ro tate the monit or in the state of the powe r cord or cabl e connecting to the monito r, the power cord of cable can be d estroyed.
Using ( ), You can a djust the tilt anl gle within a rang e of 3° forwar d to 25° backward fo r the most comforta ble viewing a ngle. Attachin g a Base This monitor a ccepts a 200 mm x 100 mm VE SA-complian t Mounting in terface pad . Monitor Mounting interface pad (Sold sepa rately) 1.
inside of the Monitor. z For wall moun ts that do not com ply with VESA standard screw specif ications, the length of the s crews may differ d epending on their specific ations. z Do not use screws tha t do not comply w ith the VESA standard screw specifications .
Monitor Driver When prompted by th e operating sy stem for the mo nitor driver, in sert the CD- ROM included with this monitor. Driver ins tallation is sl ightly diffe rent from one op erating system to another. Foll ow the directions a ppropriate for the operatin g system you hav e.
This monitor driv er is under certifying MS logo, and th is installation d oesn't damage yo ur system. The certi fied driver wi ll be posted on Samsung Mon itor homepa ge http://www.
This monitor driv er is under certifying MS logo, and th is installation d oesn't damage yo ur system. The certi fied driver wi ll be posted on Samsung Mon itor homepa ge http://www.samsung. com/ Click " Update Driv er…" in t he "Driver" tab.
Click "Close" → "C lose" → "OK " → "OK" on th e following screens dis played in sequenc e. Micros oft ® Windows ® XP Operating Sy stem Insert the CD into t he CD-ROM drive. Click "Start" → "Control Panel " then click the "App earance an d Themes" icon.
Click the "Prope rties" but ton on the "Moni tor" tab an d select "Driver" ta b. Click "Upd ate Driver." an d select "Ins tall from a list or." then click the "Next" button . Select "Don't search , I will.
If you can see following "Mes sage" window, then click the "Con tinue Anyway" b utton. Then click the "OK" button. This monitor driv er is under certifying MS logo, and th is installation d oesn't damage yo ur system.
How to inst all Click "Start," "Setting," and then "C ontrol Pan el." Double click the "Dis play" icon. Select th e "Settings" ta b and click the "Advanced Prop erties" butt on. Choose "Monitor.
Natural Color Natural Colo r One of the re cent problem s in using a co mputer is th at the color of th e images printe d out by a printe r or other imag es scanned by a scanner or a digital camera are not the s ame as those sh own on the monitor. the Natural Color S/W is the very solu tion for this problem.
9. Click "Fin ish." 10. When the install ation is complete, the MagicTune™ executable icon appears o n your desktop. Double-click the icon to start the prog ram. MagicTune™ execution ic on may not ap pear depen ding on specifi cation of computer system or monit or.
Control Buttons Use this button to open the on-scree n menu and e xit from the menu screen or close screen adjustm ent menu. Analog/Digital (PC) : MagicBrigh t™ MagicBri ght™ is a new f eature provi ding the opt imum viewin g environmen t depending on the contents o f the image you are watching.
AUTO Press to self-adjus t to the inco ming Analog si gnal. The value s of fine,co arse and posit ion are adju sted automa t ically. PIP Push the PIP button t o turn PIP On/Off.
In case of push ing MENU bu tton after lock ing OSD Menu Descript ion Locked This is the function th at locks the OSD in order to keep th e current states of settings or prevent ot hers from adju sting the curre nt setting s. Lock : Hold down the menu button fo r more than five (5) seco nds to activate the OSD adjust ment lock function .
Menu Description Play/Stop MagicBrigh t™ /Mode Analog/Digital (PC) : MagicBrigh t™ MagicBright ™ is a new fe ature provid ing the op timum viewi ng environme nt depending o n the conte nts of the imag e you are watching . Then press the button ag ain to circl e through av ailable preconfigured mo des.
SOURCE Menu Descript ion SOURCE Selects the input signal while the OSD is off. (When the sou rce button is pressed to cha nge the input mode, a mes sage appears in the upper left of th e screen disp laying the cu rrent mode -- Analog, Digital, AV, S -Video and Componen t input signal.
OSD Function In p ut The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele ct ed resolutio n. Menu Description P lay/Stop Source List Use to select PC or o ther extern al input sour ces connected to the Monitor.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele ct ed resolutio n. Menu Description P lay/Stop MagicBrigh t™ MagicBright ™ is a new fe ature provid ing optim um viewing environme nt depending o n the conte nts of the imag e you are watching.
Image Loc k Image Lock is us ed to fine-tun e and get the b est image b y removing n oise that cre ates unst able imag es with jitte r and shimmer. If satisfactory re sults are not ob tained usin g t he Fine adjustment, u se the Coarse adjustment and then use Fine again.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele ct ed resolutio n.
Film Mode You can turn Film M ode Off / On. The Film Mod e feature offers y ou a theater -quality viewi ng experience. In Component m ode, film mo de is only avai lable for 480 i and 576i input.
6-Color 6 types: R ed , Green, Blue , Cyan, Magent a and Yellow - Can adjust each of the m to the pref erence of the us er. - Not availa ble in Dynam ic CR Mode MENU → , → → , → → , → → , → → , → 1) Saturation Adjusts the color saturation.
The default setting may di fferent de pending on th e selected Input Mode (input signa l source selec ted in Extern al Input Li st) and the sele ct ed resolutio n. Menu Description P lay/Stop Language You can choo se one of 11 lang uages. MENU → , → → → , → Transparenc y Changes t he opaqueness o f the backgro und of the OS D.
Check List Before calling fo r service, check the infor mation in this section to see if you can remedy any problems yo urself. If you do ne ed assistance, please call t he phone numb er on the Informa tion section or contact your deale r . Symptom Check List Solutions No images on the screen.
Is the power indicat or on the monitor bl inking at 1 second inte rvals? Press a key on the k eyboard to a ctivate the monit or and restore the im age on the screen. If there is still no image, pre ss the ' ' button. Then press any key on the keyboard agai n to activate th e monitor and re store the imag e on the screen.
There is a message that reads "Unrecog nized monitor, Plug & Play (VESA DDC) monitor found". Have you in stalled the monitor driver? Install the monitor driver accord ing to the Driver Installation Instru ctions . See the vide o card manual to see if the Plug & Play (VESA DDC) function can be supported.
Set the resolu tion at the Co ntrol Panel → Appearance and Themes → Display → Settings. Windows M E/2000 : Set the resolu tion at the Co ntrol Panel → Disp lay → Settings.
out of scan range or that you need to check the signal cable. Environment The locati on and the posi tion of the monitor may influe nce the qua lity and othe r features of the monitor. If there are any s ub woofer spe akers near the monitor, unplug and re locate the wo ofer to anoth er room.
S p ecifications General Model Name SyncMaster 275T LCD Panel Size 27" Wide Diagon al (68 cm) Display area 581.76 mm (H ) x 363.6 mm (V) Pixel Pitch 0.303 mm (H) x 0.30 3 mm (V) Synchron ization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
15pin-to- 15pin D-su b cable, Deta chable DVI-D to DVI-D connector, Detachabl e (not suppli ed) Signal Connectors 15pin 3-ro w D-sub conn ector, 24pin 3- row DVI-D con nector, Composit e, S-Video, Component Dimensions (W x H x D) / Weight 629.0 X 410.
Power Indica tor Blue Blue Blinking Off Off Power Consumption Less than 130 watts Less than 2 Watts Less than 1 watt 0 watts This monito r is EPA ENERGY STAR ® compliant and EN ERGY200 0 c o m p l i a n t w h en us e d w i th a c o m p u t er e q u i p p ed w i th V ES A D P M function ality.
VESA, 1280 x 1024 79.976 75.025 135 .000 +/+ VESA, 1600 x 1200 75.000 60.000 162.000 +/+ VESA, 1920 x 1200 74.038 59.950 154.000 +/- Horizontal Frequen cy The time to s can one li ne connecting the ri.
Contact SAMSUNG WO RLDWIDE If you have any questions or comm ents relati ng to Sa msung products, ple ase contact the SAMSUNG customer care center . North America U.S.A 1-800-SAMSUNG (726786 4) http://www.samsung. com CANADA 1-800-SAMSUNG (726 7864) http://www.
BELGIUM 03 201 2418 http://www.samsung. com/be CZECH REPUBLI C 844 000 844 http://www.sa msung.com/cz DENMARK 70 70 19 70 http://www.samsung. com/dk FINLAND 030 -6227 515 http://www.samsung. com/fi FRANCE 326 0 SAMSUNG(72678 64) (€ 0,15/min) http://www.
INDIA 3030 8282, 1800 1100 11 http ://www.samsung. com/in INDONESIA 0800-112 -8888 http://www.samsun g.com/id JAPAN 0120-327 -527 http://www.samsung. com/jp MALAYSIA 1800 -88-9999 http://www.sa msung.com/my PHILIPPINES 1800-10-SAM SUNG (7267864) http://www.
The number of horizontal a nd vertica l dots used to compose the screen ima ge is called 'resolution'. This numb er shows the accur acy of the dis play. High resolution is good for performing mu ltiple tasks as more image info rmation ca n be shown on the screen.
W i n d o w s N T are r e g i ster e d tr a d e m a r ks o f M i croso f t C o r p or a ti o n; V ESA , DP M a n d DDC are registere d trademarks of Video Electr onics Standard Association; t he ENERGY STAR ® name and logo are reg istered trad emarks of the U.
An important point after buying a device Samsung 275T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 275T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 275T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 275T you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 275T will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 275T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 275T.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 275T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 275T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
