Instruction/ maintenance manual of the product Prestige SP6CDP Audiovox
Go to page of 11
OWNER ’ ’ S MANUAL MODEL : P A V -6CDP 6 COMP ACT DISC AUT O CHANGER.
1 * Tracks from 6 CDs stored in the disc magazine can be selected and played. * Horizontal, vertical, angled and suspended installation. * Do not install the unit in a location where it may be subjected to : - direct sun or other forms of excessive temperature.
2 * Do not expose the discs to direct sunlight or excessive heat. * Clean the discs before inserting them into the disc magazine. Always clean a disc from center outward with a cleaning cloth. * Never use solvents such as benzine or alcohol to clean a disc.
3 1. * Pull out the slot by pulling the part with finger. * With the label side up, insert a CD all the way 6 discs, one in each slot * Push slot and close it. 3. Insert the magazine firmly (which has been taken out of the unit) with the mark visible on the top side.
4 Precautions Select the mounting location very carefully by referring to the following points * Make sure that there is not a fuel tank, wiring or piping on the other side of the mounting surface. * Make sure that the installation of the unit will not hinder the movement of the trunk lid or interfere with the spare tire etc.
5 Installing the unit Mounting angle setting lever Be sure to adjust Mounting Angle Setting Lever(A) to appropriate angle; 0 ° for horizontal, 22.5 ° angle, 45 ° angle, 67.
6 After adjustment, be sure to attach the Double side Tape . Note Do the same procedure on the other side of the unit. Horizontal installation Construction Removing temporarily Making holes on the carpet Completion Note About parts numbers ❶❷ ❺❻❼❽ ,refer to page 4.
7 V ertical installation 1. Construction 2. Removing temporarily 3. Making holes on the carpet 4. Completion Note About parts numbers ❶❷❺ ❻❼❽ , refer to page 4.
8 Suspended installation When installing the unit in the trunk under the rear window shelf, observe the following. - Make sure that the unit is suspended horizontally. - Select the mounting location carefully so that the unit does not hinder the movement of the torsion bars of the trunk lid.
9 When connecting, run the supplied connecting cable and connect to Audiovox model PAV-9 as illustrated here. Caution Make sure to disconnect the ground wire terminal of the car battery before making a connection in order to prevent short circuiting. Note Use only the supplied connecting cable.
PRINTED IN KOREA 12 MONTH LIMITED W ARRANTY Applies to Audiovox Video products AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should this.
An important point after buying a device Audiovox Prestige SP6CDP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Prestige SP6CDP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Prestige SP6CDP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Prestige SP6CDP you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Prestige SP6CDP will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Prestige SP6CDP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Prestige SP6CDP.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Prestige SP6CDP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Prestige SP6CDP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center