Instruction/ maintenance manual of the product 173P Plus, 193P Plus Samsung
Go to page of 57
SyncMaster 173P plus/193P plus.
Notational Failure to follow di rections noted by this symbol could resul t in bodily harm or damage to equipment. Prohibited Important to read and understa nd a t all times Do not disassemble Disconn.
Do not use a damaged or loo se plug. z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the p lug with wet ha nds. z This may cause an electric shock or fire. Use only a pr op erly grou nded plug a nd recept acle.
Do not drop the monitor w hen moving it. z This may cause d amage to the prod uct or human bo dy. Install the monitor base in a show case or shelf so that the end of the base does not proj ect beyond the sh owcase or shelf. z Dropping the product may cause dama ge to the product or personal injury.
Do not place the monitor face down. z The TFT-LCD surface may b e damaged. Installin g a wall bracket must be done by a qualifie d professional. z Installation by unqua lified personnel may resu lt in in jury. z Always use the mounting device specifi e d in the owne r's man ual.
Unplug the pow er cord from the power outlet and wipe the product using a soft, dry cloth. z Do not use an y chemicals such as wax, benzene, alco hol, thinners, insecticide, air freshener, lu bri cant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year.
Do not try to move the monitor by pu lling on ly the wire or the signal cable. z This may cause a breakdown, elec tri c shock or fire due to damage to the cable. Do not move the monitor right or le ft by pulling o nly the wire or the signal cable. z This may cause a breakdown, elec tri c shock or fire due to damage to the cable.
Adjust the r esolution an d frequency to th e levels ap propriate for th e model. z Inappropriate resolution may cau se undesirable picture quality. 17 inch - 1280 X 10 24 Be careful that adapter shou ld no t be in cont act with water and therefore not be wet.
Do not install the product on an unstable, une ven surface or a location prone to vibrati ons. z Dropping the product may cause dama ge to the product or personal injury. Using the product in a location prone to vibration s may shorten the lifetime of the produ c t or may ca tch fire.
Please make su re the followi ng items are incl uded with your monitor. If any items are missing, co ntact your dealer . Contact a local deale r to bu y o p tional item s.
D-Sub Cable Power Cord DC- A da p ter Bracket Bracket V ESA Mountin g Bracket Sold se p aratel y DVI Cable Front Power indicator This ligh t glows blue du ring normal oper ation, and blinks blue o nce as the monitor saves your adjustments.
See PowerSaver described in the manual for fu rthe r information rega rding power saving functions. For energy cons ervation, turn your monitor OFF when it is not needed or when leaving it unattended for long p eriods. Rear (The configu ration at the b ack of the moni tor may vary from produ ct to product.
1. Connect the DC adapter for your moni tor to the power port on the back of the moni tor. Plug the power cord for the moni tor into a nearby outlet. 2-1. Using the D-sub (Analog) conne ctor on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
Pivot Stand (When pivoting the monitor, rotatio n angle is displayed on scre en of the monitor.) 0° 90° 180° Cautio n : When pivoting the monitor, the corner of th e monitor may reach to the floor. Tilt the monitor backward more than 45 degrees and then pivot it.
Caution: The stand is made of aluminum. Keep it from getting nicked or scratch ed. Wall Mountin g the Monito r Installin g the Monitor Driver ( Automatic ) When prompte d by the operating system fo r the monitor driver, insert the CD-ROM included with th is monitor.
4. Click the "Install" button in the "Warning" window. 5. Monitor dr iver installation is complete d. Windows XP/20 00 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Drive r" 3. Choose your monitor mode l in the model list, then cli ck the "OK" button.
http://www.samsung.com/monitor (U.S.A) http://www.sec.co.kr/monitor (Korea) http://www.samsung monitor.com.cn/ (China) Microsoft ® Window s ® XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click " Start " —> " Control Panel " then click the " Appearance a nd Themes " icon.
7. Click the " Browse " button then choo se A:(D:Driver) an d choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following message window, then click the " Continue Anyway " button.
10. Monito r driver installatio n is comple ted. Microsoft ® Windows ® 2000 Operating System When you can see "D igital Signature Not Found" on your monitor, follow the se steps. 1. Choose " OK " button on the " Insert disk " w indow.
frequency by referring to the Preset Timin g Modes in the u ser guide. Linux Operating Sys tem To execute X-Window, you need to make th e X86Config file, wh ich is a type of system setting file. 1. Press Enter at the first and the second screen after executi ng the X86Config file.
How to delete the Natura l Color software program Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program" . Select Natural Color from the list and then click the "Add/Delete " button.
Installation 1. Insert the installa tion CD into the CD-ROM d rive. 2. Click the AutoRotation insta llation file. 3. Select installation Lang uage, Click "Next".
5. Select "I agree to the terms of the license agree ment" to accept the terms of use. 6. Choose a fold er to in sta l l t he AutoRotation program.
8. The "Installation Stat us" window appears. 9. Click "Finish ." 10. When the installation is co mplete, the MagicRotation, MagicT un e™ executable icon appe ars on your desktop.
Double-click the icon to start the program. MagicTune™ execu tion icon may not appear de pending on specification of computer system or monitor. If that happens, press F5 Key. Installation Proble ms ( Ma g icTune ™ ) The installati on of MagicTune™ can be affected by such factors as the video card, motherbo ard and the network en viron ment.
e.g. 3D games 4. DOS based applications in Full Scree n Mod e wi ll not function as per the orientation mod e selected (90, 180, 270). 5. Dual is not supported in Wi ndows™ 98, ME, NT 4.0. 6. MagicRotation doe s not provide supp ort for 24 bits per pixel (Bit dep th/Color Quality).
Overview | OSD Mode | Color Calibration | Troubleshooting Overview What is Ma g icTune™? Monitor performance can vary due to the graphics card, host computer lightin g con ditions and other environmental factors. In order to get the be st image on a monito r requ ires you to adjust it for your unique setting.
z When Pivot is fu nctioning, part of Magic Tune™ Program may no t operate normally. z AutoRotation : AutoRotation will au tomatically pivots the monitor to 0, 90, 180degrees wh en you pivots th e monitor. To execute Rota tion, it should be done as bel ow.
MagicBright™ depending on the con tents of the image you are watchi ng . Currently four different modes are availabl e: Te xt, Internet,Game, Sport, Movie an d Cu stom. Each mode has its own pre-configure d bri ghtness value. You can easily sele ct one of six settings by simply pre ssi ng MagicBright co ntrol buttons.
MagicColor 3. Full : Displays not only vivid natural color but also more realistic natural skin color with clearness. 4. Intellige nt : Di spla ys vivid natural color with clearness.
Image Setup z Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tunin g, repeat it after adjusting the frequency (clock speed). z Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the scre en image area.
Server IP Write down t he server IP . Department Write down the departme nt. Location Write down the location. Version Displays the versio n of MagicTune ™. Overview |O S D M o d e| Color Calibration | Troubleshooting Color Calibration Color Calibration Color Calibration guide s you to get optimal color condition fo r your monitor.
Press "Preview" button on the Color Calibrat ion. The above pictu r e wi l l be show n. 1. Press "View Calibrated " button to see the calibration effect wh ich you adjusted. 2. Press "View Uncalibra te d" b utto n to see the original image.
Please visit our homepa ge to see the Troublesho oting section. An error occurs when replacing the monitor with a new one when the system power is off but the system has not been restarted. Please restart the system each time th e monitor is replaced before using MagicTune™.
not functi on properly. (VGA) with Window OS that supp orts Plug and Play. steps below (When Wind ow s™ i s XP); Control Panel → Performance and Maintena nce → System → Hardware → Device Manager → Monitor s → After deleting Plug and Play monitor, find 'Plu g and Play monitor' by searchi n g ne w Ha rdware.
Traditionally, computer displays all owed the user to view only in landscap e mode. In today's information age, more user s nee d to view docu men ts, web pages, emails, etc. in there day to day li fe. These type s of applications ca n be better viewed in portra it mode where the entire contents are available on the scree n.
Rotate : Display w ill get rotat ed by the un it of 90 degre e Rotate to 0 : Display will get r ota te d to 0 degr ee from the current angle of rotation .
Rotate to 180 : Display will get rota ted to 180 de gree from the current angle of rotation. Rotate to 270 : Display will get rota ted to 270 de gree from the current angle of rotation.
Hot key : Hot Keys are available by defa ult and can be changed by user. It can be assigned by user directly with keyboard after cha nging the exis ting HotKey. User can create the hot key with the combin ation of Shift, Ctrl, Alt and general keys. In case only general key is pressed, it will be assigned in the form of Alt+g en era l key.
2. Check if th e problem occurs wi th different col or depths (8/16/3 2 bits per pixe l) and different resolution modes (800 x 600, 10 24 x 768). 3. Check if the problem o ccurs without installing Magi cRota tion Software.
Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call the phone number on th e Information section or contact your de aler . Symptom Check List Solutions No images on the screen.
If the monitor does not respon d, activate the sour ce conversion feature located on the front of the monitor, or try mo ving the mouse or pressing a key on the keyboard again.
monitor' by searchi ng new Hardware. MagicTune i s an additi onal softwa re for the monito r. So me graphic cards may not support yo ur monitor. When you have a problem with the gra phic card, visit our webs ite to check the compatible graphic card list provided.
Self-Test Featu re Check | Warning Messages | Environment | Useful Tips Y our monitor provides a s elf test feature t hat allows you to check whether your m onitor is functioni ng properly . Self-Test Fea ture Check 1. Turn off both your computer and the monitor.
General General Model Name SyncMaster 173P plus LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
Less than 40W Dimensions (WxDxH)/ Weight 382 x 40.5 x 316.5 mm(15. 0 x 1.6 x 12.5 inch) 382 x 236.2 x 395.2 mm(15.0 x 9.3 x 15.6 inch ) /6,0kg(After inst allation of Stand) 382 x 99.3 x 316.5 mm(15.0 x 3.9 x 12.5 inch) / 6.0k g(After folding the Stand) VESA Mounting Interface 75mm x 75mm (for use with Specia lty(Arm) Mounti ng hardware.
Table 1. Prese t Timing Modes Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 48 0 35.
General General Model Name SyncMaster 193P plus LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.
Less than 40W Dimensions (WxDxH)/ Weight 423 x 44.2 x 351.5 mm(16. 7 x 1.7 x 13.8 inch) 423 x 236.2 x 412.7 mm(16.7 x 9.3 x 16.2 inch ) / 7.1 kg(After insta llation of Stand) 423 x 103 x 351.5 mm(16.7 x 4.1 x 13.8 inch) / 7.1 kg(After folding the Stand) VESA Mounting Interface 75mm x 75mm (for use with Specia lty(Arm) Mounti ng hardware.
Table 1. Prese t Timing Modes Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 48 0 35.
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Sa msung products, p lease contact the SAMSUNG customer care cent er. North Amer ica CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.
CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/mi n) http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12 /Min) http://www.
Terms Dot Pitch The image on a monitor is compose d of red, green and blue dots. Th e closer the dots, the higher the resolu tion. The distance betw een two dots of the same color is call ed the 'Dot Pitch'.
3 . If you a r e n o t sati s f i ed w i th t h e q u a l ity o f p icture, you c an g e t b e tter q u al i t y o f p i ct u r e by executing "auto adjustmen t function" in display screen that is ap peared as window termination b utton is presse d.
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to an other especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usag e of LC D products in order to protect them from Image retention.
Ex) The best way to prote ct your monitor from Image retention i s to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection s ystems) This mar.
An important point after buying a device Samsung 173P Plus, 193P Plus (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 173P Plus, 193P Plus yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 173P Plus, 193P Plus - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 173P Plus, 193P Plus you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 173P Plus, 193P Plus will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 173P Plus, 193P Plus, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 173P Plus, 193P Plus.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 173P Plus, 193P Plus. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 173P Plus, 193P Plus along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
