Instruction/ maintenance manual of the product 151MP Samsung
Go to page of 57
SyncMaster 15 1 MP / 17 1 MP.
English > Main > Index Main Page Safety Instructions Notational Power Installation Cleaning Other Introduction Unpacking Front Rear Remote Control Setup Connecting Your Monitor Connecting to a C.
English > Main > Safety Instructions > Notational Notational Power Installation Cleaning Other Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.
English > Main > Safety Instructions > Power Notational Power Installation Cleaning Other When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug.
English > Main > Safety Instructions > Installation Notational Power Installation Cleaning Other Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a breakdown or fire. Put your monitor in a location with low humidity and a minimum of dust.
English > Main > Safety Instructions > Cleaning Notational Power Installation Cleaning Other When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric. Do not spray detergent directly on the monitor.
English > Main > Safety Instructions > Ohter Notational Power Installation Cleaning Other Do not remove cover(or back). No user serviceable parts inside. z This may cause an electric shock or a fire. z Refer servicing to qualified service personnel.
English > Main > Intro duction > Unpac king Unpack ing Fro nt Rear Remote Cont rol Please mak e sure the f ollowing ite ms a re include d w ith your mo nitor.
English > Main > Introduction > Front Unpacking Front Rear Remote Control For detail information concerning the monitor functions, refer to User Controls under Adjusting Your Monitor. The monitor's front configuration may vary slightly depending on the monitor model.
English > Main > Introduction > Rear Unpacking Front Rear Remote Control For detailed information concerning cable connections, refer to Connecting Cables under Setup. The monitor's rear configuration may vary slightly depending on the monitor model.
English > Main > Introduction > Remote Control Unpacking Front Rear Remote Control For detailed information of the Remote Control Unit functions, refer to Adjusting Your Monitor > User Controls > User Control Buttons > Remote Control buttons .
English > Main > Setup > Connecting Your Monitor > Connecting to a Computer Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Connecting to a Computer Connecting to other devices Turn on your computer and monitor.
English > Main > Setup > Connecting Your Monitor > Connecting to other devices Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Connecting to a Computer Connecting to other devices AV input devices like DVDs, VCRs or Camcorders as well as your computer may be connected to the monitor.
1. Connect the antenna or the cable box to the TV tuner box (not included) using the "ANTENNA" terminal on the tuner box. 2. Remove the TV Tuner Box cover from the rear of the monitor. 3. Insert the connected tuner box into the slot and firmly tighten the two screws using a coin to lock the box in place.
4. Connecting Headphone You may connect your headphones to the monitor. 1. Connect your headphones to the Headphone-out port..
English > Main > Setup > Installing the Monitor Driver > Automatic Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Automatic Manual When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
1. Insert CD into the CD-ROM driver. 2. Click " Windows XP/2000 Driver ". 3. Choose your monitor model in the model list, then click the " OK " button. 4. Click the " Install " button in the " Warning " window. 5.
English > Main > Setup > Installing the Monitor Driver > Manual Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Automatic Manual When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7.
10. Monitor driver installation is completed. 2. Microsoft ® Windows ® 2000 Operating System * When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose " OK " button on the " Insert disk " window.
4 . Microsoft ® Window s ® NT 4.0 Operating System 1. Click Start , Settings , Control Panel , and then double-click Display icon. 2. In Display Registration Information window, click Settings Tab and then click All Display Modes . 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK .
English > Main > Setup > Installing a VESA base > Folding or removing the base Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Folding or removing the base Installing a VESA base This monitor supports various types of VESA-standard bases.
1. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 2. Disconnect the monitor cables. 3. Remove the four bolts that fasten the base to the monitor. 4. Reconnect the monitor cables. You may install a VESA base when the monitor base is separated.
English > Main > Setup > Installing a VESA base > Installing VESA base Connecting Your Monitor Installing the Monitor Driver Installing a VESA base Folding or removing the base Installing a VESA base The monitor supports VESA mounting standard for use with various VESA mounting devices.
English > Main > Adjusting Your Monitor > User Controls > User control buttons User Controls On-Screen Display User control buttons Direct-Access Features The control button configuration may vary slightly depending on the monitor model. Source Buttons | Control Buttons | Remote Control Buttons | Source Buttons | 1.
| Control Buttons | For more information on the screen adjustment functions, refer to On-Screen Display . 5. Power button / Power indicator Use this button to turn the monitor on and off. Power Indicator shows PowerSaver mode by green blinking. Refer to Specifications > PowerSaver .
1 Power button Use this button to turn the monitor on and off. 2-5 Source Button See the Source Buttons above. 6 PIP Position button Adjusts the location of Video image in PIP mode. Press VOL - / VOL + , + CH / - CH buttons to adjust the location up and down or left and right.
English > Main > Adjusting Your Monitor > User Controls > Direct-Access Features User Controls On-Screen Display User control buttons Direct-Access Features Direct-Access Features let you display Monitor Adjustment Menu by simply pressing Auto button once.
4. Channel When OSD is not on the screen, push the + CH / - CH button to select channel number. 1. Push the button to decrease the channel number. 2. Push the button to increase the channel number. This function is available in TV or PC + TV (PIP) mode only.
English > Main > A djusti ng Your M onitor > On -Screen Di splay > OSD Functio ns User Co ntrols On-Screen Displa y OSD Functions Screen Adjustm ent Ani mation Clip s Characters and icons be com e hig hlighted in blue du ring adjus tment for ea ch menu.
Image being dis played c an be mad e softer or s harper. Pos itio n This adjus ts the sc reen loca tion horiz ontal ly and v ertically . Sound The monitor h as a buil t-in hi gh fidelity st ereo audio amplifier. 1) Bass : Emphas ize low frequenc y audio.
Upon se lect ing a cha nnel sys tem, you wil l be asked if you wan t to perform " Channel auto program ". Select "O K" to perform th e "Chan nel auto p rogram" or se lect "C ancel" to s elect diff erent chann el system.
English > Main > Troubleshooting > Check before calling for service Check before calling for service Problems and Solutions Q & A Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself.
1. Checking Adapter Driver Click Start --> Settings --> Control Panel --> Display --> Settings --> Advanced --> Adapter. If "Default" or a wrong product model is indicated, it means that the adapter driver is not properly installed.
1. Maintaining the Monitor Case Clean with a soft cloth after disconnecting the power cord. 2. Maintaining the Flat Panel Display Screen Clean with a soft cloth (cotton flannel) smoothly. z Do not use benzene, thinner or other flammable substances, or a wet cloth.
English > Main > Troubleshooting > Problems and Solutions Check before calling for service Problems and Solutions Q & A The following table lists possible problems and their solutions. Before calling for service, check the information in this section to see if you can remedy any problems yourself.
Picture image is unstable and vibrates. z Check if the resolution and frequency set for the computer video card falls in the range supported by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes .
English > Main > Troubleshooting > Q & A Check before calling for service Problems and Solutions Q & A Frequently asked questions are summarized here for your reference. Question Answer How can I change the frequency? Frequency can be changed by reconfiguring the video card.
English > Main > Sp ecifica tions > General S pecificatio ns General PowerSaver Preset Timing Modes Design and s pecific ations are subject to ch ange wi thout prior no tice. General Model Name SyncMaste r 151M P LCD Pan el Size 15.0 i nch (Dia gonal) Display area 304.
VESA Mounting Interface 75mm x 75mm (for u se with Sp ecialty(Arm ) Mounting h ardware.) Environmental considerations Operating Tempera ture : 5 0°F ~ 104 °F(10°C ~ 40 °C) Humidity : 10 % ~ 80 % ,.
E n g lis h > Ma in > S p e c ific a t io n s > G e n e r a l S p e c ific a t io n s General PowerSaver Preset Timing Modes Design and s pecific ations are subject to ch ange wi thout prior no tice. General Model Name SyncMaste r 171M P LCD Pan el Size 17.
VESA Mounting Interface 100mm x 1 00mm (for use wi th Specialty(A rm) Mou nting hardw are. ) Environmental considerations Operating Tempera ture : 5 0°F ~ 104 °F(10°C ~ 40 °C) Humidity : 10 % ~ 80.
English > Main > Specifications > PowerSaver General PowerSaver Preset Timing Modes This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time.
English > Main > Specifications > Preset Timing Modes General PowerSaver Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.
Table 2. PAL Broadcasting Systems Color System Sound System Stereo System Channel System Countries PAL B/G A2 CCIR Germany, Austria, Swiss, Netherlands AUSTRALIA Australia NICAM CCIR Sweden, Spain, De.
English > Main > Information > Service Center Service Center Terms Regulatory Natural Color Authority U.S.A. : Samsung Computer Products Customer Service 400 Valley Road, Suite 201, Mt. Arlington, NJ 07856 Tel. : (973)601-6000, 1-800-SAMSUNG (1-800-726-7864) Fax.
Fax. : (0208) 397 9949 < European Service Center & National Service > Stafford Park 12 Telford, Shropshire, TF3 3BJ Tel. : (0870) 242 0303 Fax.
IMPORTADO POR: SAMSUNG ELECTRONICS MEXICO S.A. DE C.V. SATURNO 44 COL. NVA. INDUSTRIAL VALLEJO DEL. GUSTAVO A. MADERO C.P. 07700 MEXICO D.F. TEL. 5747-5100 RFC: SEM950215S98 EXPORTADO POR: SAMSUNG ELECTRONICS CO.,LTD. JOONG-ANG DAILY NEWS BLDG. 7 SOON- WHA- DONG CHUNG-KU, C.
English > Main > Information > Terms Service Center Terms Regulatory Natural Color Authority Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals.
English > Main > Information > Regulatory Service Center Terms Regulatory Natural Color Authority FCC Information | IC Compliance Notice | MPR II Compliance | European Notice (Europe only) | .
Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
reasonable for the user. Labelled products must meet strict environmental demands, for example in respect of the reduction of electric and magnetic fields, along with physical and visual ergonomics and good usability.
Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment.
TCO'03-Ecological requirement s for personal computers (T CO'03 applied model only) Congratulations! The displa y you have j ust purchased ca rries the TCO03 Displays la bel. This me ans that y our displa y is designed, manu factured an d tested acco rding to some of the strictest quality and environment al requirements in the world.
English > Main > Information > Natural Color Service Center Terms Regulatory Natural Color Authority Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.
English > Main > Information > Authority Service Center Terms Regulatory Natural Color Authority Information in this document is subject to change without notice. © 200 3 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co.
http://www.samsung - monitor.com/ (Worldwide) http://www.samsungusa.com/monitor/ (USA) http://www.sec.co.kr/monitor/ (Korea) http://www.samsungmonitor.
An important point after buying a device Samsung 151MP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung 151MP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung 151MP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung 151MP you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung 151MP will certainly help you make a decision on the purchase.
If you already are a holder of Samsung 151MP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung 151MP.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung 151MP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung 151MP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
