Instruction/ maintenance manual of the product PEQ-200 Audiovox
Go to page of 12
-1- Ow Ow Ow Ow Ow ne ne ne ne ne r's r's r's r's r's Manual Manual Manual Manual Manual PEQ-200 5-BAND CROSSOVER AND EQUALIZER.
-2- CONTENTS Precautions/Specifications.................................................... 3 Installation Procedures.......................................................... 4 Wiring Instructions......................................................
-3- PRECAUTIONS Monday - Friday Saturday 8:30am - 7:00pm Eastern 9:00am - 5:00pm Eastern 1-800-645-4994 HELP! IMPORTANT - READ THIS SECTION CAREFULLY 1. This unit does not contain a power amplifier and must be used with a compatible external amplifier.
-4- The PEQ-200 should be easily accessible to the operator, and is intended for in-dash (if a location is available), console, or under-dash mounting as shown. To install the unit, proceed as follows: 1. Carefully choose a favorable mounting location prior to wiring the unit.
-5- NOTE: If ground wire to the source is not available, you will need to find your own grounding point. Locate a metal area close to the PEQ-200 that provides a good ground point (preferably the floor). Eliminate unwanted paint and other contaminants using a wire brush or sandpa- per.
-6- SUBWOOFER REAR FRONT FULL 80Hz 100Hz 150Hz 200Hz 150Hz 100Hz FULL 120Hz 100Hz 80Hz 50Hz CROSSOVER-EQUALIZER INPUT RL INPUT LEVEL L R FRONT OUT REM B+ GND L REAR HIGHPASS OUT R SUBWOOFER OUT L R _ .
-7- OPERA TING INSTRUCTIONS 1 POWER INDICATOR This LED indicator lights green when power is applied to the unit from a remote source, such as the radio and/or the vehicle ignition switch, and provided the remote terminal is connected to +12Vdc.
-8- 9 HI-MID 2kHz CONTROL Rotate this control counterclockwise (minimum) or clockwise (maximum) to adjust the system high mid-range cut or boost, respectively, between -12dB and 12dB at the frequency of 2kHz.
-9- bp HIGH PASS OUT FRONT R/L CONNECTORS These connector ports provide the high-pass crossover stereo output signal to the front speaker amplifier. The crossover equalization frequency of this signal is selected by the FRONT crossover selector switch (item 19).
-10- bu FRONT HIGH-PASS CROSSOVER SWITCH This 4-position slide switch allows you to select the high-pass crossover point for the front speakers at 200Hz, 150Hz, 100Hz or FULL (Full Range) during 2-way and 3-way operation. The frequencies above the setting of this control will be passed through the crossover to the HIGH PASS OUT FRONT R/L jacks.
-11- AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in .
-12- © 2001 Audio vo x Electronics Cor p., 150 Marcus Blvd., Hauppauge , N.Y . 11788 Printed in China 128-5802.
An important point after buying a device Audiovox PEQ-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PEQ-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PEQ-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PEQ-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PEQ-200 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PEQ-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PEQ-200.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PEQ-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PEQ-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
