Instruction/ maintenance manual of the product SS725r Ryobi
Go to page of 14
SS725r Straight Shaft T rimmer Add-On OPERA TOR’S MANUAL FOR QUESTIONS, CALL 1-800-345-8746 in U.S. or 1-800-265-6778 in CANADA www.ryobi.com IMPORT ANT MANUAL DO NOT THROW AW A Y.
INTRODUCTION T ABLE OF CONTENTS 2 THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-to-under- stand operating instructions.
RULES FOR SAFE OPERA TION 3 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
RULES FOR SAFE OPERA TION 4 • Turn off all controls before unplugging. • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. • Do not allow to be used as a toy. Close attention is necessary when used by or near children.
RULES FOR SAFE OPERA TION 5 SYMBOL MEANING • WEAR EYE AND HEARING PROTECTION WARNING: Thr own objects and loud noise can cause severe eye injury and hearing loss. W ear eye protection meeting ANSI Z87.1 standards and ear pr otection when operating this unit.
OPERA TING INSTRUCTIONS 6 2. While firmly holding the add-on, push it straight into the Click-Link ® coupler (Fig. 2). NOTE: Aligning the release button with the guide recess will help the installation (Fig. 2). 3. Turn the knob clockwise to tighten (Fig.
OPERA TING INSTRUCTIONS 7 Each time the head is bumped, about 1 inch (25.4 mm.) of trimming line is released. A blade in the cutting attachment shield will cut the line to the proper length if excess line is released. For best results, tap the Bump Head ™ on bare ground or hard soil.
OPERA TING INSTRUCTIONS 8 MAINTENANCE AND REP AIR INSTRUCTIONS Fig. 7 DECORA TIVE TRIMMING Decorative trimming is accomplished by removing all vegetation around trees, posts, fences, etc. Rotate the whole unit so that the cutting attachment is at a 30 ° angle to the ground (Fig.
MAINTENANCE AND REP AIR INSTRUCTIONS 9 Line Locking Hole 6. Pull the line from the outer spool until the line is tight against the inner reel (Fig. 11). Fig. 11 Fig. 10 Bump Knob Foam Seal Spring Inner Reel INSTALLING A PREWOUND REEL 1. Turn the Bump Knob counterclockwise and remove the bump knob, spring, and foam seal (Fig.
MAINTENANCE AND REP AIR INSTRUCTIONS 10 2. Pull out the bump knob, spring, and foam seal (Fig. 14, Pg. 9). 3. Pull the inner reel with existing line from the outer spool (Fig. 14, Pg. 9). 4. Remove any existing line from the inner reel before cleaning.
TROUBLESHOOTING 11 SPECIFICA TIONS CAUSE ACTION Oil in cutting head Clean the cutting attachment If further assistance is requir ed, contact your authorized service dealer .
TRIMMER ADD-ON P ARTS LIST - MODEL SS725r 12 Item Part No. Description 1 612605 Hanger 2 180689 Lower Drive Shaft Housing Assembly 3 683608 Lower Flexible Drive Shaft 4 153597 Lower Clamp Assembly (in.
NOTES 13.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES INCLUDING .
An important point after buying a device Ryobi SS725r (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi SS725r yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi SS725r - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi SS725r you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi SS725r will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi SS725r, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi SS725r.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi SS725r. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi SS725r along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
