Instruction/ maintenance manual of the product PLT3043E, RY70103A Ryobi Outdoor
Go to page of 18
OPERA T OR'S MANUAL String T rimmer PL T3043E R Y70103 Y our new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability , ease of operation, and operat or safety . Properly cared for , it will give you years of rugged, trouble-free performance.
2 T ABLE OF CONTENTS ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols ..
3 SAFETY ■ ■ ■ ■ ■ Secure long hair so it is above shoulder level to prevent entanglement in any moving parts. ■ ■ ■ ■ ■ Keep all bystanders, children, and pets at least 15 m (50 ft.) away. ■ ■ ■ ■ ■ Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.
4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution.
5 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
6 FEA TURES Fig. 1 ST ARTER GRIP ENGINE HOUSING THROTTLE TRIGGER FRONT HANDLE GRASS DEFLECTOR CUTTING LINE IGNITION SWITCH THROTTLE INTERLOCK SHAFT UNP ACKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during shipping.
7 ASSEMBLY INSTRUCTIONS: GRASS DEFLECTOR See Figure 2. 1. Remove wing nut, flat washer, lock washer, and bolt from the Owner’s Kit. 2. Place grass deflector over shaft and bracket. 3. Install bolt through the slots in the tabs on grass deflector and bracket on driveshaft housing.
8 Fig. 4 BENT END OF MUFFLER GUARD OPENING IN REAR HOUSING MUFFLER GUARD ASSEMBLY See Figure 4. 1. Remove muffler guard and two screws from the owner's kit. 2. Attach the muffler guard to the rear housing. NOTE: Make sure the bent end of the muffler guard fits securely into the opening of the rear housing.
9 FILLING THE TANK 1. Clean surface around fuel cap to prevent contamination. 2. Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap. 3. Carefully pour fuel mixture into the tank. Avoid spillage. 4. Prior to replacing the fuel cap, clean and inspect the gasket.
10 OPERA TION BEST CUTTING AREA DANGEROUS CUTTING AREA Fig. 6 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1. Run engine at full throttle.
11 OPERA TION W ARNING Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. TO START A COLD ENGINE: 1. Lay trimmer on a flat, bare surface. 2. Push primer bulb 8 to 10 times. NOTE: Do not squeeze the throttle trigger before engine starts.
12 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the muffler.
13 STRING REPLACEMENT See Figures 12, 13, 14 and 15. 1. Stop the engine, disconnect the spark plug wire. Hold the string head and unscrew the spool retainer. Turn counterclockwise. 2. Remove the spool from the string head. NOTE: Keep the spring attached to the spool.
14 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged. Replace fuel cap if required.
15 PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POS POS POS POS POS SIBLE CA SIBLE CA SIBLE CA SIBLE CA SIBLE CA USE USE USE USE USE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM CONT ACT YOUR AUTHORIZED SERVICE DEALER.
16 TROUBLESHOOTING 1. Cut tall grass from the top down. 2. Operate trimmer at full throttle. Clean threads and lubricate with grease - if no improve- ment, replace spool retainer. 1. Operate trimmer at full throttle. 2. Use fresh fuel and the correct 2-cycle oil mix.
17 SOUND POWER/PRESSURE & HANDLE VIBRATION CHART FOR STRING TRIMMERS / BRUSHCUTTERS Information on Noise Emission per European Machine Safety Directive 98/37/EC. The individual equipment listed was operated in a manner consistent with normal working conditions.
983000-201 1-03 OPERA T OR'S MANUAL String T rimmer PL T3043E R Y70103 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany T el.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.
An important point after buying a device Ryobi Outdoor PLT3043E, RY70103A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi Outdoor PLT3043E, RY70103A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi Outdoor PLT3043E, RY70103A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi Outdoor PLT3043E, RY70103A you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi Outdoor PLT3043E, RY70103A will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi Outdoor PLT3043E, RY70103A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi Outdoor PLT3043E, RY70103A.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi Outdoor PLT3043E, RY70103A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi Outdoor PLT3043E, RY70103A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
