Instruction/ maintenance manual of the product K-13 Audiovox
Go to page of 10
Page 1 of 10 P/N 8007131 Rev. C 1/12/99 BJ ASA Electronics TV/VCP Floor Console Model K - 13 W ithout Harness and Antenna 12 Volt DC powered remote controlled 13” television AVT - 1475 12 Volt DC powered remote controlled VHS Video Cassette Player AVP - 7000 Installation Instructions Audiovox Specialized Applications, LLC.
Page 2 of 10 P/N 8007131 Rev. C 1/12/99 BJ This manual contains specific instructions on how to install this automotive TV/VCP floo r console. Please read this manual thoroughly before installing the console into the vehicle.
Page 3 of 10 P/N 8007131 Rev. C 1/12/99 BJ There are six (6) steps to install the K - 13 TV/VCP floor console: Step # 1 Disassemble shroud Step # 2 Install brackets and straps Step # 3 Mount the conso.
Page 4 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step #2) Install brackets and straps 1) Mount brackets, using only four screws. Do not use center hole. 2) Use soldering iron, if necessary, to melt holes in open strap and loop strap, as shown.
Page 5 of 10 P/N 8007131 Rev. C 1/12/99 BJ 3) Pre - drill pilot holes on side of VCP shelf (A) and on bottom of TV shelf (B) using 1/8” drill bit. (A) (B).
Page 6 of 10 P/N 8007131 Rev. C 1/12/99 BJ 4) Attach both straps, use TV and VCP t o help locate strap if necessary..
Page 7 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step 3) Install console to floor of vehicle. ⇒ BEFORE DRILLING ANY HOLES VERIFY THAT THE DRILL BIT WILL NOT ENTER INTO THE FRAME RAIL(S) OF THE VEH ICLE, ELECTRICAL WIRES, FUEL LINES, BRAKE LINES, HOSES, EXHAUST SYSTEMS OR ANY OTHER ITEMS THAT WILL IMPAIR THE OPERATION OF THE VEHICLE.
Page 8 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step 4) Install the VCP into the console. ⇒ Remove the VCP from the box. ⇒ Connect the white RCA connector (customer supplied) from the console to the wh.
Page 9 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step 5) Install the TV into the console. ⇒ Connect the yellow RCA patch cord (customer supplied) to the yellow RCA video input jack on the rear of the tele.
Page 10 of 10 P/N 8007131 Rev. C 1/12/99 BJ Step 6) Replace the rear shroud and face of console. ⇒ Place the rear and face of the console over the body of the console. Gently tap into place. ⇒ Reinsta ll the four Phillips screws that held the face to the body.
An important point after buying a device Audiovox K-13 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox K-13 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox K-13 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox K-13 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox K-13 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox K-13, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox K-13.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox K-13. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox K-13 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
