Instruction/ maintenance manual of the product SC-577 Robic
Go to page of 7
OPERATING INSTRUCTIONS FOR Robic SC-577 Thank you for buying the Robic SC-577 300 memory personal training watch. Your purchase brings you a world class watch with timekeeping functions suitable for a wide v a riety of activities. Please read a these instructions carefully to fully acquaint yourself with the many fun c tions offered by the SC-577.
- RESET TIMER (PRESS AND HOLD WHEN TIMER IS STOPPED) - SELECT ALARM NUMBER AND CHIME - STOP CHRONOGRAPH - SHOW FREE LAP NUMBER (CHRONOGRAPH STOPPED) - SELECT SEGMENT - REVERSE SETTING (SET) S3: - ENTE.
- When setting seconds, pressing S1 or S2 while the se cond digits count between 30 to 59 will reset the second digits to 00 and 1 will be added to the minute digits. - Year can be set from 1990 to 2049. - When setting 12/24HR, press S1 or S2 to toggle 12-hour or 24-hour display formats.
S3 SECOND MINUTE HOUR S3 S3 - After all adjustments are completed, press S4 to exit setting mode. - Press S1 to start the timer. - When the timer is counting, press S1 can toggle between the display formats of timer. S1 PRESET TIME COUNT DOWN TIME - Press S2 to stop the timer, or the timer will stop autom atically when it counts down to zero.
(2) Alarm 3 and alarm 4 5 - Alarm 3 and alarm 4 are weekday alarms. - As illustrated in the diagram, alarm 3 will sound at 7:30 AM of dual time (T2) from Monday to Friday. - The setting sequence is shown as follow: (3) Alarm 5 and alarm 6 - Alarm 5 and alarm 6 are date alarms.
- Lap number, lap time and split time are shown at the t op, middle and bottom row of the display respectively. - Press S1 to start the chronograph. - For the first hour, the chronograph shows minutes, seconds and 1/100-seconds, then the chronograph shows hours, minutes and seconds.
7 LIMITED WARRANTY OUR BASIC POLICY Marshall –Browning International Corporati on (MBI Corp.) warrants to the original owner, this timepiece (excluding battery, less, band or strap) for the period of one year from the ori ginal purchase date. This lim ite d warranty is gi ven by MBI Corp.
An important point after buying a device Robic SC-577 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Robic SC-577 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Robic SC-577 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Robic SC-577 you will learn all the available features of the product, as well as information on its operation. The information that you get Robic SC-577 will certainly help you make a decision on the purchase.
If you already are a holder of Robic SC-577, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Robic SC-577.
However, one of the most important roles played by the user manual is to help in solving problems with Robic SC-577. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Robic SC-577 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
