Instruction/ maintenance manual of the product SC-606 Robic
Go to page of 8
Page 1 of 8 Rev 02 05/0 4/ 05 SC-606 Instructions SC-606 Thank you f or buying t he Robic SC-6 06. Your p urchase brings yo u a world class timer with a vast array of advanced ti mekeeping f unctions.
Page 2 of 8 Rev 02 05/0 4/ 05 (2) Split (accumulated) Time Chronograph, or (3) Dual Lap/Split Time Chronograph Each option offers these funct ions: ¾ 1/100 Second Resolution to 24 Hours ¾ Recall of the previous 30 Time Readings ¾ Automatic Lap/Split Counter .
Page 3 of 8 Rev 02 05/0 4/ 05 Repeat the setting process for Seconds >>>> Hours >>>> Minutes >>>> Month >>>> Date >>>> Da y of the Week >>>> 12/24 Hour Option >>>> and back to Alarm Hours.
Page 4 of 8 Rev 02 05/0 4/ 05 Memory Recall “UP” or “DOWN” LAP Counte r CHRONO Indi cator SPLIT Indicator ¾ Chrono in Split Time mode ¾ Chrono st opped in RESET position ¾ Memory Recall in ascending order “ UP” The appropriate indicator “LAP”, “SPL” or “LAP/SPL” will appear.
Page 5 of 8 Rev 02 05/0 4/ 05 Single Events: Press “A” to start. Press “A” ag ain to stop. Press “B” to reset to all zeros. Timing Multiple Splits: Press “A” to start. “RUN” indicator appears and time is shown running in the lower row of the display.
Page 6 of 8 Rev 02 05/0 4/ 05 (1) Countdown Count-up (CdC) Acts as a “Count Up” chrono graph with 1/10 second resolution upon completion of the countdow n time. You may preset times from 1 second up to 24 hours. The time remaining will be displayed within 1/10 second resolution.
Page 7 of 8 Rev 02 05/0 4/ 05 “Time Out”. You may st op and restart the CDT by pressing “A” . While st opped, the “STOP” indicator will appear. You may restart the timer by pressing “A” or reset to th e origin al preset time by pressing “B”.
Page 8 of 8 Rev 02 05/0 4/ 05 MBI Corp., 115 Hurley Road , Oxford, CT 06478 We strongly reco mmend th at when sending it through th e mail, you send th e product insu red, return receip t requested, so that if a pr oblem in shipping arises, you can trace it through the or iginating post office.
An important point after buying a device Robic SC-606 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Robic SC-606 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Robic SC-606 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Robic SC-606 you will learn all the available features of the product, as well as information on its operation. The information that you get Robic SC-606 will certainly help you make a decision on the purchase.
If you already are a holder of Robic SC-606, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Robic SC-606.
However, one of the most important roles played by the user manual is to help in solving problems with Robic SC-606. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Robic SC-606 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
