Instruction/ maintenance manual of the product R82233 RIDGID
Go to page of 18
1 Y our impact driver has been engineered and manufactur ed to our high standards for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-fr ee performance.
2 n Introduction ............................................................... ............................................................... ....................................... 2 n General Safety Rules .........................................
3 GENERAL SAFETY RULES WARNING! RE AD AN D UN DER ST AND ALL INST RU CT ION S. Failure to follow all instructions listed below , may r esul t in elec tric shock , fir e and/ or ser ious person al injury . SA VE THESE INSTRUCTIONS WORK AREA n Keep your work area clean and well lit.
4 SERVICE n Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. GENERAL SAFETY RULES n When servicing a tool, use only identical replacement parts.
5 SAFETY RULES FOR CHARGER WARNING! RE AD AN D UN DER ST AND ALL IN ST RU C T ION S. Fail ure to fol low all instructions listed below , may r esul t in ele c tr ic sho ck, fir e and/ or se riou s per s on a l injury .
6 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Pr oper interpr eta- tion of these symbols will allow you to operate the tool better and safer .
7 SYMBOLS The following signal words and meanings ar e intended to explain the levels of risk associated with this product. Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury . Indicates a potentially hazar dous situation, which, if not avoided, could result in death or serious injury .
8 FEA TURES Fig. 1 COUPLER BIT STORAGE DIRECTION OF ROT A TION SELECTOR (FORWARD / REVERSE / LOCK-OUT) P ADDLE SWITCH PRODUCT SPECIFICA TIONS Motor .......................................................................................................
9 FEA TURES KNOW YOUR IMP ACT DRIVER See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules.
10 OPERA TION ? ? ? ? ? ? ? E v a lu a t e e Evaluer Evaluar Charging C Charging C Charging a rg an d Charging d Charging o E n c h ar g e Ful l C o m pl e to Ch a r g e m ax . . Power C or r ie n t e A lim e n t a t io io n n D e f ec t i v e e D e fe ct u e us e e D e fe c t uo s a 12.
11 OPERA TION OPERA TION OPERA TION OPERA TION OPERA TION Ready to char ge battery pack When batter y pac k re aches coole d temperature, charger begins fast char ge mode W h e n b a t t e r y p a c k.
12 OPERA TION INST ALLING BITS See Figure 4. n Lock the paddle switch on the driver by placing the direc- tion of rotation (forward-reverse) selector in center lock out position. n Remove the battery pack from the driver. n Pull the coupler away from the driver (1).
13 OPERA TION TO REMOVE BA TTERY P ACK See Figure 6. n Locate the latches on the side of the battery pack and depress both sides to release the battery pack from the driver.
14 OPERA TION RIGHT ANGLE DESIGN See Figures 9 - 10. ���Th e impa ct dri ver featur es a right ang le hea d desig n to reach into tight areas. WARNING Hold tool by insulated gripping surfaces when performing an operation where the screw may contact hidden wiring.
15 MAINTENANCE WARNING: W h e n s e r v i c i n g u s e o n l y i d e n t i c a l R I D G I D replacement parts. Use of any other parts may create a hazar d or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
16 NOTES.
17 W ARRANTY Proof of purchase must be presented when requesting war - ranty service. Limited to RIDGID ® hand held and stationary power tools purchased 2/1/04 and after . This product is manufactur ed by One W orld T echnologies, Inc. The trademark is licensed from RIDGID, Inc.
18 983000-528 2-05 Customer Service Information: For parts or service, con tact your near est RIDGID authorized service center . Be sure to pro vide all rel e vant information when you call or vis it. For the lo ca tion of the au tho rized ser vice cen ter nearest you, please call 1-866-539-1710 or visit us online at www .
An important point after buying a device RIDGID R82233 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RIDGID R82233 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RIDGID R82233 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RIDGID R82233 you will learn all the available features of the product, as well as information on its operation. The information that you get RIDGID R82233 will certainly help you make a decision on the purchase.
If you already are a holder of RIDGID R82233, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RIDGID R82233.
However, one of the most important roles played by the user manual is to help in solving problems with RIDGID R82233. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RIDGID R82233 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center