Instruction/ maintenance manual of the product AutoSet CS ResMed
Go to page of 15
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.
English 1 S9 VPAP ST indications for use The S9 VPAP ST is i ntended to pro vide non-in vasive ventila tion for pat ients weighing mo re than 13 kg with respir atory insuf ficiency or ob structive sl eep apnoea (O SA). The S9 VP AP ST is intend ed for home and hospital use.
English 2 • ear or sinus di scomf ort • ey e irritation • skin rashes . Masks and humidifiers Recommended masks and hu midifiers are available on www.resmed.com on the Products pa ge under Service & Support. For inform ation on us ing your mas k or humidi fier, refe r to the manu al suppli ed with your mask o r humidifie r.
English 3 Getting started 1 . Make sure the power is connected. 2. Adjust t he ramp time if r equired. 3. Fit your mask as described i n your mask user gu ide. 4. To start therapy, simply br eathe into th e mask and/or pres s . 5. Lie down and ar range the air t ubing so that it is free to move if you turn in you r sleep.
English 4 Troubleshootin g If there is a proble m, try the fo llowing sugg estions. If the prob lem cannot b e solved , contact your equipment su pplier or Res Med. Do not att empt to open the se devices. Pro blem/P ossible caus e Solution No display P ower is not connect ed.
English 5 Device does not st op when you remove your mask SmartStart/Stop is disa bled. Note: SmartStart/Stop is not a vailable if Leak Alert is enabled. Enable SmartStart/Stop. SmartStart /Stop is enabled but the device does no t stop automatically when you remove your mask Incompatible mask sy stem being used.
English 6 Displays error mess age: Check ResMed 30/90W Power Supply Unit and fully insert the connector The D C plug is parti ally inserted into the bac k of the device or inserted too slow ly . F ully insert the DC plug. A non-ResMed power supply uni t is connected t o the device.
English 7 SD card An SD card has bee n supplied to gather therap y data from your device and pro vide setting s updates from your cli nician. Wh en instruct ed to do so, disconnect the devi ce from the po wer outle t, remove you r SD card, ins ert it in th e protectiv e folder and send it to yo ur clinician .
English 8 Operating temperat ure +5ºC to +35ºC Note: The air flow for breathin g produced by th is therapy device can be hi gher than the temperature of the room.
English 9 Notes: • The manufa cturer res erves the right to change the se specifi cations wi thout not ice. • The tempera ture and r elative humi dity sett ings disp layed for C limate Co ntrol are n ot measur ed values.
English 10 Environmental information WEEE 2002/96 /EC is a Eu ropean Dir ective th at requires the prop er disposal of electr ical and e lectronic equipment.
English 11 This warrant y is only avail able to the init ial consumer. It is not tran sferable. If the produ ct fails under co nditions of normal use, Res Med will repair or replace, at its option, the defective product or any of it s compone nts.
English 12 WARNINGS • Read the entire manual be fore using th e dev ice. • Use the device only as directed by your physician or healthcare provider . • Use the device only for the int ended use as desc ribed in thi s manual. Advice cont ained in t his manual shoul d not supersed e instructions given by the prescrib ing physician.
English 13 • Do not use elec trically cond uctive or antist atic air tubings. • Do not use the ai r tubing if there are any visib le signs of damage.
An important point after buying a device ResMed AutoSet CS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ResMed AutoSet CS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ResMed AutoSet CS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ResMed AutoSet CS you will learn all the available features of the product, as well as information on its operation. The information that you get ResMed AutoSet CS will certainly help you make a decision on the purchase.
If you already are a holder of ResMed AutoSet CS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ResMed AutoSet CS.
However, one of the most important roles played by the user manual is to help in solving problems with ResMed AutoSet CS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ResMed AutoSet CS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
