Instruction/ maintenance manual of the product REG10J0020-0200 Renesas
Go to page of 18
REG10J0020-0200 Renesas Starter Kit LCD Application Board User's Manual RENESAS ST ARTER KIT Rev .2.00 Renesas T echnology Europe Ltd. Revision date ： 29.
T able of Content s Chapter 1. Preface .................................................................................................................................................. 3 Chapter 2. Purpose ............................................
Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of this document, either in w hole or part is prohibited without the written permission of Rene sas Technology Europe Limited.
Chapter 2.Purpose This RSK Application Board is an evaluation tool for Renesas microcontrollers with an LCD driver interface. It is used in con ju nction with the RSK for the microcontroller to be evaluated. Features include: • Mounting connections to allow RSK to be added to top of board.
Chapter 3.Board Layout 3.1.Component References The following diagram shows the component references for the board. Figure 3-1: Component Refer ences 5.
3.2.Board Component functions The following diagram the shows the functions of the components on the board. JA 5 JA 1 JA 6 JA 2 Appl ic at ion Boar d Int erfac e Appl ic at ion Boar d Int erfac e JA 4.
3.3.Board Dimensions The following diagram gives the board dimensions and connector positions. All through hole connect ors are on a common 0.1” grid for easy interfacing. LCD connector 170.00m m 100.00mm Coin Cell Holder 115.00m m 14.00mm 86.36mm 85.
Chapter 4.User Circuitry 4.1.Fitting the Target RSK to the RSK LCD application board The board is supplied with 2x 24 way sockets, 2x 26 way sockets and 1 x 50 way socket. These should be soldered on the underside of the host RSK in JA1, JA2, JA5, JA6 and JA4 positions.
Se g ment L K J I DP C B A DEFXMNGH Bit number 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Hex value for RAM A 0 1 0 0 0 1 1 1 0 1 1 0 0 0 1 0 4762 B 1 0 1 0 0 0 0 1 1 1 1 0 0 0 1 0 A 1E2 C 0 0 0 0 0 0 0 1 1 1 1 .
4.3.Coin Cell and switch. The board includes a coin cell holder to hold a 2032 3.6V coin cell. T o power the attached RSK from this cell the switch must b e in the “ON” position. IT IS IMPORT ANT NOT T O POWER THE A TT ACHED RSK VIA THE POWER SUPPL Y JACK OR VIA THE E8A IF THIS OPTION IS USED.
Chapter 5.Headers 5.1.Application Headers This information is supplied for reference. Only JA1 pin 3 ( battery s upply voltage to RSK) and the ground pins are connected on this board. T able 5-1 and below T able 5-2 show the standard application header connections.
JA2 Pin Generic Header Name CPU board Signal Name Pin Header Name CPU board Signal Name 1 Open drain RESn 2 External Clock Input EXTAL 3 Open drain NMIn 4 Regulated Supply 1 Vss1 5 Open drain output W.
JA6 Pin Generic Header Name CPU board Signal Name Pin Header Name CPU board Signal Name 1 DMA DREQ 2 DMA DACK 3 DMA TEND 4 Standby (Open drain) STBYn 5 Host Serial SCIdTX RS232TX 6 Host Serial SCIdRX .
T able 5-5 below shows the LCD header connection s JA4 Pin Generic Header Name Signal Name Pin Header Name Signal Name 1 V0 V0 2 V1 V1 3 V2 V2 4 V3 V3 5 GROUND GROUND 6 GROUND GROUND 7 COM1 COM1 8 COM.
Chapter 6.Code Development RSKs with appropriate LCD connections will include suitable sam ple software to drive the LCD on this board. Section 4.2 includes details of bit mapping for the LCD segments.
Chapter 7.Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW man ual available on the CD or from the web site. Online technical support and information is available at: http://www.renesas.com/renesas_starter_kits T echnical Contact Details America: techsupport.
Renesas S tarter Kit LCD Application Board User's Ma nual Publication Date Rev.2.00 29.11.2007 Published by: Renesas T echnology Europe Ltd. Duke’s Meadow , Millboard Road, Bourne End Buckinghamshire SL8 5F H, United King dom ©2007 Renesas T ec hnology Euro pe and Renes as Solutions C orp.
Renesas S tarter LCD Application Board User's Manual Renesas T echnology Europe Ltd. Duke’s Meadow , Millboard Road, Bourne End Buckinghamshire SL8 5F H, United King dom.
An important point after buying a device Renesas REG10J0020-0200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas REG10J0020-0200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas REG10J0020-0200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas REG10J0020-0200 you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas REG10J0020-0200 will certainly help you make a decision on the purchase.
If you already are a holder of Renesas REG10J0020-0200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas REG10J0020-0200.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas REG10J0020-0200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas REG10J0020-0200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
