Instruction/ maintenance manual of the product M32182T2-PTC Renesas
Go to page of 7
( 1 / 7 ) M32182T2-PTC Converter for In-circuit Connection (for M32182F3xFP) Instruction Manual Rev. 1.0 April 1, 2003 REJ10J0005-0100 Z If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.
( 2 / 7 ) 1. Outline The M32182T2-PTC is a converter for featuring the debugging function such as real-time tracing when using emulators M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E with the M32182F3xFP.
( 3 / 7 ) 5. Connection Procedure The procedure for connecting the M32182T2-PTC is shown according to applications. See Figures 2 to 4. 5.1 For the M32100T2-SDI-E (1) Mount the NQPACK144SD. (2) Mount the YQPACK144SD on the NQPACK144SD. (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE's.
( 4 / 7 ) 5.2 For the M32100T-SDI-E and M32170T-SDI (1) Mount the NQPACK144SD. (2) Mount the YQPACK144SD on the NQPACK144SD. (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE's. (4) Set the clock select switch. (5) Mount the M32182T2-PTC on the YQPACK144SD.
( 5 / 7 ) 6. Selecting a Clock With the M32182T2-PTC, it is possible to select a clock supply to the MCU by the clock select switch (SW1). Select a clock supply as shown below. However, when used with the M32182T2-PTC, the clock cannot be supplied from the target system.
( 6 / 7 ) 7. External Dimensions and a Sample Foot Pattern of the M32182T2-PTC Figure 6 External dimensions and a sample foot pattern of the M32182T2-PTC Unit: mm.
( 7 / 7 ) CAUTION Cautions to Be T aken for Emulator: • For debugging, use this product in the combination with the M32170T-SDI, M32100T-SDI-E or M32100T2-SDI-E emulator. • When using with the M32170T-SDI or M32100T-SDI-E, the following restriction is applied according to the MCU operating frequency.
An important point after buying a device Renesas M32182T2-PTC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas M32182T2-PTC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas M32182T2-PTC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas M32182T2-PTC you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas M32182T2-PTC will certainly help you make a decision on the purchase.
If you already are a holder of Renesas M32182T2-PTC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas M32182T2-PTC.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas M32182T2-PTC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas M32182T2-PTC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
