Instruction/ maintenance manual of the product AS - 9151N Audiovox
Go to page of 7
Remote Car S t arter Inst allation Instructions AS - 9151N For installation in vehicles with 12 volt negative ground circuits, gasoline engines, with automatic transmission only! KIT CONTENTS (1) Remo.
BATT 1 BATT 2 ACC IGN 1 IGN 2 IGN 3 START * SPLICE (TYP.) IGNITION SWITCH KEY POSITION OFF ACCESSORY ON / RUN START LT.
WIRING CONNECTIONS: 12 Pin Input / Output Harness 1. BLACK Wire: Chassis Ground Source Connect this wire to a solid, clean chassis ground source. 2. DARK BLUE Wire: Remote Start Signal Input Connect this wire to the pulsed ground output from the remote alarm system.
8. YELLOW w/ BLACK Tracer Wire: + 12 Volt Alarm By - Pass Output This wire provides a 500 mA + 12 Volt transistorized output when the ignition key is turned to the “ON” position, and 0 Volts when the ignition key is “OFF” and when the vehicle is running under the control of the remote starter.
Multi Coil Pack Adaptor: The multi coil pack adaptor is designed for use with vehicles having multiple ignition coils where a single point tach signal is unavailable. T o use the adaptor , the Green/Black wires must connect to the negative side of the ignition coil(s).
PROGRAMMING AND TESTING: 1. You will notice a 4 position dip switch on board the remote start module. Dip switch #1 and #2 are used to program the Tach Rate. Refer to the chart below for proper setting of these dip switches. 2. Dip switch #3 controls the run time of the AS-9151N.
12 PIN CONNECTOR WIRING THE 12 PIN INPUT / OUTPUT HARNESS CONTROLSWITCH TO ALARM'S IGNITION INPUT- (YELLOW WIRE OF AUDIOVOXALARMS) LIGHT BLUE WHITE WHITE POSITIVE INHIBIT 1 REMOTE TRIGGER TO GROU.
An important point after buying a device Audiovox AS - 9151N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox AS - 9151N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox AS - 9151N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox AS - 9151N you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox AS - 9151N will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox AS - 9151N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox AS - 9151N.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox AS - 9151N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox AS - 9151N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center