Instruction/ maintenance manual of the product APD-510 Audiovox
Go to page of 10
Model APS-510 Owner ’s Manual 4 Button Remote Security System with Dual Stage Shock Sensor IMPORT ANT ! In order to provide the highest possible level of security to your vehicle, this system is equipped with selectable manual override circuitry .
Page 2 YOUR “ ANTI CODE GRABBING “ TRANSMITTERS The transmitters included with your new security system use the most advanced and secure form of radio frequency transmission available on any current automotive security system.
Page 3 ARMING THE SYSTEM - P ASSIVE ( AUT OMA TIC ) 1. Turn off the engine, exit the vehicle, and close and lock all doors, hood lid and trunk lid. þ Red dash mounted LED begins to flash rapidly , indicating 30 sec- o nd passive arming has begun.
Page 4 DISARMING THE SYSTEM 1. As you approach the vehicle, press and release the Unlock button on the key- chain transmitter . þ Red dash mounted LED turns off. If passive arming was selected during the installation, then the LED will start flashing rapidly , indicating that the system is re-arming auto- matically .
Page 5 o Doors Unlock - Optional Note : If the optional 2 step door unlock circuit is installed, when the unlock transmitter button is activated, the drivers door only will unlock, pressing the unlock button a second time will cause all doors to unlock.
Page 6 3. T o return to normal operation, press and release the push button switch any time the ignition is on. NOTE: Always remember to return the system to the NON V ALET mode, after servicing, to ensure that the vehicle remains protected at all times.
Page 7 each code, then the system will begin arming. If the LED flash pattern reports the previously stored code, the new code was not entered correctly . Please repeat steps 1 through 7 above considering the following. NOTE: Acceptable digits 10ths or units are 1 through 9.
Page 8 1) Enter the vehicle and turn the ignition switch to the on position. Note: The siren will sound. 2) Within 5 seconds, press and release the pushbutton switch 1 time. 3) Within 5 seconds, turn the ignition switch off then on. 4) Within 5 seconds, press and release the pushbutton switch 1 time.
feature will continue for the allotted 30 seconds, however , the security system will be disarmed allowing the vehicle to start. ADDITIONAL REMOTE FUNCTION ( CHANNEL 3 ) This security system has an additional features that can be connected to a number of different optional accessories.
APS-510 SYSTEM FUNCTIONS A T A GLANCE DASH LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = V ALET MODE 3 FLASH.
An important point after buying a device Audiovox APD-510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox APD-510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox APD-510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox APD-510 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox APD-510 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox APD-510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox APD-510.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox APD-510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox APD-510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
