Instruction/ maintenance manual of the product 570 Redring
Go to page of 12
Pumped Electric Shower Installation instructions & User guide IMPORT ANT : This booklet should be given to the customer after installation and demonstration. WARNING: Under no cir cumstances should this unit be connected to the mains cold water supply .
Thank you for choosing a quality 'Redring' product manufactur ed in Peterborough, England. CONTENTS Page Information for the user Important Safety Instructions 2 How to use your 'Redrin.
the option of reduced water flow . This option is mainly for summer usage and if this is used then knob 'B' must be re-adjusted. 8. When you have finished showering turn knob 'B' fully clockwise to the ' • Stop' position.
temperature climbs above a set limit and the 'overheat' light will come on. This cut-out which gives an audible click, may also operate due to residual heat when the shower is switched off. It will r eset itself if cold water is run through the shower for 10 to 20 seconds and the 'overheat' light will go out.
Check power is on (indicated by 'power on' light). Decrease water flow by adjusting the temperature control (knob 'B') clockwise to a higher number on the temperature scale. Switch power to ' • high power ' setting. Select inner or outer spray patterns only .
REDRING AFTER SALES SERVICE We of fer a technical advisory service on the telephone to contractors and other customers with problems in the field. Ring 0870 9000 430 (Normal Office Hours) Spare parts can be supplied against any VISA or Access cards.
b) The heater must not be mounted in the direct spray fr om the handset. c) The handset must not be able to come into contact with the used water in the cubicle, bath or basin. If it can, even after the hose has been retained by the hose r etainer (see diagram 12), then a vacuum breaker must be fitted.
6. The shower is designed to have an open outlet and should only be used with Redring recommended fittings. WARNING: DO NOT FIT A T AP ON THE SHOWER OUTLET . T AKE CARE TO A VOID RESTRICTING THE OUTLET OF THE PRESSURE RELIEF DEVICE. (SHOWN IN DIAGRAM 2).
9 5. A dual position cable clamp is provided. For top cable entry use retaining bar in horizontal position supplied. For bottom cable entry rotate r etaining bar to the angled position.
10 ASSEMBL Y OF RISER RAIL, HANDSET AND SOAP DISH Removable insert in soap dish for ease of cleaning Locating Key Additional knock out fixing slot if requir ed Diagram 12.
.
APPLIED ENERGY PRODUCTS L TD, MORLEY WA Y , PETERBOROUGH PE2 9JJ. TEL: +44(0)1733 456789 F AX: +44 (0)1733 310606 Website : www .redring.co.uk 559-2334-01 B Full details of T erms and Conditions of Gu.
An important point after buying a device Redring 570 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Redring 570 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Redring 570 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Redring 570 you will learn all the available features of the product, as well as information on its operation. The information that you get Redring 570 will certainly help you make a decision on the purchase.
If you already are a holder of Redring 570, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Redring 570.
However, one of the most important roles played by the user manual is to help in solving problems with Redring 570. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Redring 570 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center