Instruction/ maintenance manual of the product 56K Modem Module Y-308 Raypak
Go to page of 6
Y-308 56K Modem Module For use with Y-200 Series Electronic Boiler Sequencer & Outdoor Reset Control Sy stem Installation and Operating Manual CA T ALOG NO.
Installation and Operating Manual Y-308 Modem Mo dule 1 Contents Introduction ................................ ............................. 1 Important Safety Instructions ................................ ... 1 Installation and Set-Up ...............
Y-308 Modem Module Installation and Operating Manual 2 Installation and Set-up Note: A PCMCIA card might be necessary on some laptop computers for proper operation. Modem Board Installation 1. Remove power from the Y-200 cont rol . 2. Install the plug-i n modem module (P/N 601741) on to connectors “J22” and “J23” as shown on the PCB.
Installation and Operating Manual Y-308 Modem Mo dule 3 Dialing into the Y-200 Programming Keys and Operation 1. The “U ” key takes you up through the screen dis plays and in the program mode changes the ch aracter above the cursor scrolling up . 2.
Y-308 Modem Module for Y- 200 Series Electronic Boiler Sequencer & Outdoor Reset Control System SCOPE OF WARRANTY Raypak, Inc. ("Raypak") warrants to the original owner the Control System to be free from defects in materials and wo rkmansh ip under normal use and service for the applicable warranty period.
ww w . raypak.com Raypak, Inc., 2151 Eastman Avenue, Oxnard, CA 93030 (805) 278-5300 Fax (805) 278-5468 Litho in U.S.A..
An important point after buying a device Raypak 56K Modem Module Y-308 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raypak 56K Modem Module Y-308 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raypak 56K Modem Module Y-308 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raypak 56K Modem Module Y-308 you will learn all the available features of the product, as well as information on its operation. The information that you get Raypak 56K Modem Module Y-308 will certainly help you make a decision on the purchase.
If you already are a holder of Raypak 56K Modem Module Y-308, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raypak 56K Modem Module Y-308.
However, one of the most important roles played by the user manual is to help in solving problems with Raypak 56K Modem Module Y-308. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raypak 56K Modem Module Y-308 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
