Instruction/ maintenance manual of the product MasterConsole Z Raritan
Go to page of 34
MasterConsole ™ Z User Manual Copyright © 2006 Raritan Computer, Inc. MCZ-0B-E May 2006 255-33-1200.
This page intentionally left blank..
Copyright and Tradem ark Information This document contains proprietary information that is protected by copyright. All rights reserved. No part of this document may be phot ocopied, reproduced, or tr anslated into another language without express prior written consent of Raritan Computer, Inc.
Safety Guidelines To avoid potentially fatal shock hazard a nd possible damage to Raritan equipm ent: • Do not use a 2-wire power cord in any product configuration. • Test AC outlets at your computer and monitor for proper polarity and ground ing.
C ONTENTS i Content s Chapter 1: In troduction .................................................................. 1 MasterConsole Z Overview ......................................................................................... 1 Product Photos ...
ii F IGURES Figur es Figure 1 MasterConsole Z User Stati on (MZUS T) ....................................................................................... 1 Figure 2 MasterConsole Z Computer Interface Module (MZCIM-PS2) .............................
C HAPTER 1: I NTRODUCTION 1 Chapter 1: Introduction MasterConsole Z Overview The MasterConsole Z switchless access system consists of two co mponents – a User Station (MZUST) and an MZ-Computer Interface Module (MZCIM), connected with Enhanced Category 5e UTP cable.
2 M ASTER C ONSOLE Z U SER G UIDE Figure 3 MZCIM-USB Figure 4 MZCIM-SUN Product Features • Innovative zero-U design supports up to 64 computers, any combination of PS/2, USB, and SUN, on a single Ca.
C HAPTER 1: I NTRODUCTION 3 User Station (MZUST) Features Front Panel • Status LED: Indicates power and operati onal status of MZUST User Station Rear Panel • AC Power: − Connector: for AC power.
4 M ASTER C ONSOLE Z U SER G UIDE.
C HAPTER 2: I NSTALLATION 5 Chapter 2: Installation Pre-configuration Notes MasterConsole Z installation requires that a Port Name is assigned to each co mputer as it is added to the MZCIM chain during installation.
6 M ASTER C ONSOLE Z U SER G UIDE C. Connect one end of a Category 5e UTP cable to the O (Out) Cat5 port on the MZCIM- PS2. Connect the other end of the cable to the In Cat 5 Port on the rear p anel of the MZUST. D. If you are not adding more computers to the User Station, insert a TER-ZCIM terminator in the MZCIM-PS2 I (In) port.
C HAPTER 2: I NSTALLATION 7 2.3. For MZCIM-SUN: A. Attach the MZCIM-SUN video (HD15) connector to the computer’s video port. B. Connect the MZCIM-SUN keyboard/mouse conn ector (8-pin mini-DIN) to the SUN computer’s keyboard/mouse port. C. Connect one end of a Category 5e UTP cable to the O (OUT) Cat5 port on the MZCIM- SUN.
8 M ASTER C ONSOLE Z U SER G UIDE.
C HAPTER 3: O PERATIO N 9 Chapter 3: Operation The Selection Menu appears automatically upon boot-up. Press the F1 key to view the help menu, or refer to the OSD Function table below for other commands.
10 M ASTER C ONSOLE Z U SER G UIDE Help Menu Press F1 to view the Help Menu, which lists all f unctions keys in a quick and easy reference. Figure 8 F1 Help Menu Selection Menu Press F2 to view the Selection Menu, which lists all port names c urrently detected by the syste m, sorted by computer name in alphabetical order.
C HAPTER 3: O PERATIO N 11 Configuration Menu When you select a port and press ENTER , that port’s Configuration Menu appears. Use this menu to make changes to the computer channel name, scan rate, .
12 M ASTER C ONSOLE Z U SER G UIDE Administration Menu Press F5 to view the Administrative Menu, where you can set User Station Information, Security Profile, and Preferences. Figure 11 Administrative Menu User Station Information On the Administration Menu, press the Ç or È key to highlight option 1 User Station Information and press ENTER.
C HAPTER 3: O PERATIO N 13 User Security Profile On the Administration Menu, press the Ç or È key to highlight option 2 User Security Profile and press ENTER.
14 M ASTER C ONSOLE Z U SER G UIDE • Scan Mode : Press the F6 key to toggle ON scan mode. The user station can sca n through all attached computer channels at a specified time interval. Global or Individual scanning is available; default scan setting is Global.
A PPENDIX A: S PECI FICATIONS 15 Appendix A: Specifications M ODELS D ESCRIPTION P RODUCT W EIGHT ( LBS ; KG ) P RODUCT D IMENSIONS (W X D X H) MZCIM-PS2 MZCIM for P/S2 .5 lbs; .22 kg 2"x 4"x 1"; 50 x 101 x 25 mm MZCIM-USB MZCIM for USB .
16 M ASTER C ONSOLE Z U SER G UIDE.
A PPENDIX B: T ROUBLESHOOTING 17 Appendix B: Troubleshooting P ROBLEM S OLUTION The MasterConsole Z chain is installed, but there is no indication of active computers on the Selection Menu (no green channels). Be sure the computers are powered ON and that the MZUST is plugged in.
18 M ASTER C ONSOLE Z U SER G UIDE.
A PPENDIX C: G LOSSARY 19 Appendix C: Glossary Active Port A port is active when a connected device is powered on. See also Port. Port There are up to 64 “ports” in a MasterConsole Z configuration. A port represents the path to a certain computer on the Selection Menu.
20 M ASTER C ONSOLE Z U SER G UIDE.
A PPENDIX D: FAQ S 21 Appendix D: FAQs Q UESTION A NSWER What is the MasterConsole Z? MasterConsole Z, the next generation Z-Series, replaces the traditional KVM switch box with an innovative chain- like server-to-server arrange ment, significantly reducing cable clutter.
22 M ASTER C ONSOLE Z U SER G UIDE Q UESTION : A NSWER : How do MZCIMs work? Using MZCIMs in conjunction with MZUST, you can connect up to 64 MZCIMs in a ‘daisy-chain’ to your server's keyboard, video and mouse ports. These signals are compressed and sent securely over a UTP Cat5 cable.
A PPENDIX D: FAQ S 23 Q UESTION : A NSWER : Can ZU42 CIMs work with MZCIMs? No. MZ CIMs use a different protocol, which is not compatible with ZU42. Can MZCIMs be used with ZU42 USTS? No. MZCIMs use a different protocol, which is not compatible with ZU42.
24 M ASTER C ONSOLE Z U SER G UIDE Q UESTION : A NSWER : I disconnected a complete MZCIM chain from the UMT and added it to the tail of another MZCIM chain. I was finally able to see all the MZCIMs but it took almost a minute. What happened? Prior to connecting the chains, you had one Master per chain.
A PPENDIX D: FAQ S 25 UTP Cabling FAQs Cat5 / Cat5e / Cat6 Cabling FAQ Q UESTION : A NSWER : What UTP cable does Raritan recommend for use with Paragon, Paragon Ready, MasterConsole II, and Cat5 Reach.
26 M ASTER C ONSOLE Z U SER G UIDE Q UESTION : A NSWER : Cat 5e is standardized. Why can’t I simply use any Cat 5e cable with Raritan products? Because the intended application of UTP cabling is the transmission of digital data, cable specifications are optimized for that application.
A PPENDIX D: FAQ S 27 255-33-1200.
World Headquarters Raritan Computer, Inc. 400 Cottontail Lane Somerset, NJ 08873 USA Tel. (732) 764-8886 Fax. (732) 764-8887 Email: sales@raritan.com www.raritan.com Rari t an OEM Di visi o n Peppercon USA, Inc. 111 E. Wacker Dr, Suite 2626 Chicago, IL 60601 Tel.
An important point after buying a device Raritan MasterConsole Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raritan MasterConsole Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raritan MasterConsole Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raritan MasterConsole Z you will learn all the available features of the product, as well as information on its operation. The information that you get Raritan MasterConsole Z will certainly help you make a decision on the purchase.
If you already are a holder of Raritan MasterConsole Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raritan MasterConsole Z.
However, one of the most important roles played by the user manual is to help in solving problems with Raritan MasterConsole Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raritan MasterConsole Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
