Instruction/ maintenance manual of the product SSM-1750 Radio Shack
Go to page of 16
Owner’s Manual Please read before using this equipment. SSM-1750 4-Channel Stereo Audio Mixer 32-3008.fm Page 1 Thursday, April 6, 2 000 4:03 PM.
2 ˆ Contents Features ........... .............. .............. .............. .............. ................. .............. .............. ...... ........ .... 4 Preparation ......... .............. .............. .............. .............. ...
3 Care ............ .............. .............. .............. .............. .............. .............. .............. ............ .. ... ........ 14 Replacing the Fuse ................ ... .............. .............. .. .............. ... ..
4 Features ˆ Features Your RadioShack 4-Channel Stereo Audio Mixer is a sophisticated control ce nter, perfect for mixing sound from multiple playback sources such as a microphone , tuner, CD player, turnta- ble, or the audio output from a VCR.
5 Features 9 Assign Contro ls— let you select the in- put sources to be mixed. 10 CROSS F ADER — lets you smoothly switch between two input sources. 11 SOUND EFFECT — let you crea te a spe- cial sound performance using the six preprogrammed sound effects.
6 Preparation ˆ Preparation PRESETTING THE CONTROLS Warning: A sudd en high output from th e mixer could damage your hearing, especially if you use headphones, and might also dam- age the audio d evices connected to the mix- er's output.
7 Operation Connecting Microphones You can connect two microphones (n ot sup- plied) to the mixer. Connect a microphone wi th an XLR plug to DJ MIC on the top panel’s upper left corner. Connect a microphone with a 1 / 4 -inch (6.35 mm) plug to AUX MIC on the back panel’s lower right corner.
8 Operation 6. After you finish mixing, turn down the volume on the output audio device s, turn off the input and output audio devices (amplifiers, tape decks, and so on), then press POWER so it pops up to turn off the mixer . The POWER indicator turns off.
9 Operation Notes: • If it was necessary to set the channel volume level sl ide control to 10 to get a reading of up to 0 on the VU meter , then slide it down to about 8 and adjust the GAIN control to get a reading of up to 0 on the VU meters. (See “Using Gain ” on Page 1 1.
10 Operation Important: No te the AUX LEVEL setting, so each time you wan t to mix that source you can set the control to the correct setting. Notes: • If it was necessary to set the AUX LEVEL contr.
11 Operation 4. Set the desired channel vo lume level slide control to the preset posi tion. 5. Adjust CUE LEVEL to a comfortable lis- tening level. 6. Start playback of the input source you want to play next through your sound system. 7. Set the input device to the desired sec- tion of music, then stop or pa use the input device.
12 Operation Note: We recommend you not adjust the GAIN controls after you have preset the in- puts as some sound imbalance could occur. Setting the Sound Balance BALANCE lets you adjust th e sound balance between the left and right speakers.
13 Operation The echo is applie d to the sound be fore all the inputs are mixed. Set ECHO to MIC to turn on the echo effect for the microphones and the AUX LINE input. Set ECHO to MUSIC to turn on the echo effect for Channels 1, 2, 3, and 4 outputs. To turn off the echo effect, set ECHO to OFF .
14 Care ˆ Care To enjoy your mixer for a long time : • Keep the mixer dry . If it gets wet, wipe it dry immediately . • Use and store the mixer only i n normal temperature envi ronmen ts. • Handle the mixer gently and carefully . Do not drop it.
15 Specifications ˆ Specifications Input Sensitivity/Impedance DJ MIC (XLR jack) ............................................................. 1.5 mV , 600 ohms, Balanced/Unbalanced AUX MIC (Phone jack) ...............................................
32-3008 04A00 Printed in China RadioShack A Division of Tandy Corporation Fort Worth, Texas 76102 Limited One-Y e ar Warranty This product is warranted by RadioShack against manufactu ring defects in .
An important point after buying a device Radio Shack SSM-1750 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack SSM-1750 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack SSM-1750 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack SSM-1750 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack SSM-1750 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack SSM-1750, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack SSM-1750.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack SSM-1750. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack SSM-1750 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
