Instruction/ maintenance manual of the product 3-DVD Changer Radio Shack
Go to page of 28
Owner’s Manual Please read before using this equipmen t. Complete 7-Piece 600-Watt Home Theater Audio System with 3-DVD Changer.
2 Read this First ˆ Read this First This audio system is made and tested to meet exacting safety stan- dards. It meets bo th UL and FC C requirements. Warnings: • This system employs a laser light beam. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury .
3 Read this First MAKING CABLE CONNECTIONS Be careful not to bend cables over the top of the receiver. If cables are placed on top of the receiver, the magnetic field pro d- cued by the receiver’s tran sformers can cause the spe akers to pro- duce a humming noise .
4 Read this First 18. Lightning — Fo r added protection for this product during a l ight- ning storm, or when it is left unattend ed and unused fo r long peri- ods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the prod- uct due to lightni ng and power-li ne surges.
5 Contents ˆ Contents Features ...................... ........... .............. ........... .............. ............ ...... 6 Preparation .................... ........... .............. ........... .............. ........... .... 7 Connecting Components .
6 Features ˆ Features Your Complete 7-Piece 600-Watt Home Theater Aud io System is a great system that incorporates so me of the best features in home the- ater technology.
7 Preparation ˆ Preparation CONNECTING COMPONENTS You must connect a TV to the receiver in orde r to use the receiver’s DVD player. You can conne ct other audio and audio/visua l compo- nents to the receiver in order to use the Home Th eater Audio Sys- tem’s surround sound capabili ties.
8 Preparation Connect the loop antenna’s wi res to AM and GND . Place the antenn a in a location (for e xample, on a shelf or windo w frame) that gives th e best reception. Keep the antenna as far away as possible from the entire system, speaker cords and the powe r cord to prevent unwanted noise.
9 Receiver Operation ˆ Receiver Operation A QUICK LOOK AT THE RECEIVER ’ S CONTROLS DISC 1, 2, 3 – Press to open or close the disc trays. Note: You cannot use these but- tons in tuner mode. DISC SKIP/TUNING MODE – Press to skip discs in DVD/CD mode.
10 Receiver Operation USING THE T UNER 1. Press POWER . The receive r defaults to the last selected fu nction. 2. Rotate FUNCTION to the tuner function. 3. Press BAND to select the desired ba nd. 4. Repeatedly press TUNING/PRESET )ý )ý )ý )ý # # # # or ,ý- ,ý- ,ý- ,ý- to tune in the desired station.
11 Receiver Operation To move forward throu gh a track , hold down TUNING/PRESET ,- ,- ,- ,- for about 2 seconds. Repeat up to two times to increase the fast-forward spe ed. T o resume playba ck, press PL A Y . Note: At the beginning or end of a track on an audio CD, the scan speed returns to normal.
12 Remote Control Operation ˆ Remote Control Operation A QUICK LOOK AT THE REMOTE CONTROL OPERATING RANGE OF THE REMOTE CONTROL The remote control may not work prop erly if: • There are obstacles between the remote control an d the receiver ’s remote sensor .
13 Remote Control Operation SETTING UP THE SURROUND SOUND SYSTEM You can use your Home The ater Audio System as soon as you take it out of the packaging. If you wish to fine-tune the system (for ex ample, substitute different speakers or al ter the sound distribution), follow th e directions below.
14 Remote Control Operation 1 1. Press 7 7 7 7 . Iý '&<J Iý '&<J Iý ' &<J Iý '&<J appea rs. T o change the distance between th e listening position .
15 Remote Control Operation Auto Preset 1. Press BAND to select the desired ba nd. 2. Hold down MEMORY for about 3 seconds. 3. The tuner automatically begins scannin g, and stores the first 30 strong signals it receives. 4. Scanning stops automati cally after radio stations have been stored in the auto preset memory .
16 Remote Control Operation Programming T racks This function allows you to program up to 32 tracks for playback in any desired order. This functio n only operates with audi o CDs (not DVDs). Note: The disc must be recognized by the receiver, so play the disc for a little while after loading, then prog ra m it.
17 DVD Player Operation ˆ DVD Player Operation BASIC PLAYBACK 1. Press POWER . The last selected function appears. 2. If necessary , press the re mote’s DVD or rotate the receiver ’s FUNCTION until DVD appears. 3. Press DISC 1 , DISC 2 , or DISC 3 to open the desired disc tray .
18 DVD Player Operation Skipping Chapters To skip forward, press TUNING/PRESET - - - - . The receiver skips for- ward one chapter each time the button is pressed. To skip backward, press TUNIN G/PRES ET ) ) ) ) . If you press TUNING/ PRESET ) ) ) ) once midway through a chapter, the receiver returns to the beginning of that chapter.
19 DVD Player Operation Press MENU during play. The DVD menu available on the disc now appears. Pressing RETURN resu mes play from the scene when MENU was first pressed. Note: The resume play option might not be possible on certain discs. Press the remote’s 8 8 8 8 , 9 9 9 9 , 6 6 6 6 , or 7 7 7 7 , then ENTER .
20 DVD Player Operation 5. Press DVD S ET UP to exit. Notes: • Some titles do not match with the rating level describe d as above. • If you change the leve l and enter a pa ssword, playback of all DVDs with ratings higher than your selection will be blocked, unless you enter the correct p assword again.
21 Troubleshooting ˆ T roubleshooting This receiver has bee n manufactured to th e specifications of RadioShack and is covered b y a limited warranty from RadioShack. I f your receiv- er is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance.
22 Troubleshooting If the receiver does not operate normally due to external effects such as static electricity, discon nect the power plug from th e outlet and insert again to return to normal operating co nditions. CARE Keep the receiver dry; if it gets wet, wipe it dry immediately.
23 Manuracturer’s Codes ˆ Manuracturer ’s Codes TV Codes Brand Codes ABEX 272 ADMIRAL 101 AKAI 102 ALLERON 146 AMTRON 138 AOC 104,105,106,107 AUDIOVOX 138 BELCOR 104 BELL & HOWELL 101, 262 BR.
24 Manuracturer’s Codes VCR Codes QUASAR 103, 154 RADIOSHACK/REALIS- TIC 104, 106, 1 12, 138, 149, 185, 262, 271, 272 RCA 103, 104, 105, 106, 107, 1 10, 1 19, 120, 121, 135, 156, 185, 198, 199, 200,.
25 Manuracturer’s Codes Cable Codes MAGNIN 413 MARANTZ 409, 410, 41 1, 416, 418, 421, 458, 462 MART A 414 MASUSHIT A 421 MEI 421 MEMOREX 41 1, 413, 414, 421, 423, 426, 504, 531 MGA 429, 465, 51 3 MG.
26 Manuracturer’s Codes SA T C odes HIT ACHI 703 HYTEX 702 JASCO 71 1 JERROLD 703, 705, 707, 714, 718, 723, 724, 746, 753, 782, 783, 784, 785, 788, 789, 790, 791, 792 LG (GOLDST AR) 770, 771, 779, 7.
27 Specifications ˆ Specifications Amplifier Section Output Power (6 ohms, 40 Hz ~ 20 kHz, 0.9% T .H .D) : Stereo .......... .......................................................... ...................... Front L/R (2 Channel Driven)100W x 2ch Output Power (6 ohms, 1 kHz, 0.
28 Specifications S-Video Y-Output Level ........................................................................... ........................................................................................................ ....... 1.0 V( p-p), 75 ohm S-Video C-Output Level .
An important point after buying a device Radio Shack 3-DVD Changer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 3-DVD Changer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 3-DVD Changer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 3-DVD Changer you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 3-DVD Changer will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 3-DVD Changer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 3-DVD Changer.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 3-DVD Changer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 3-DVD Changer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
