Instruction/ maintenance manual of the product 120-2182 Radio Shack
Go to page of 23
10 Disc CD Changer (120-2182) Features Faxback Doc. # 57808 Your RadioShack 10 Disc CD Changer is a versatile, high-quality sound system that lets you load and play up to ten of your favorite CD's in your vehicle. The CD changer plays CDs through your vehicle's existing sound system.
Repeat Play - automatically repeats the current track or the disc. Shuffle Play - randomly selects and plays tracks from any loaded CD. Intro Scan - scans and plays the first 10 seconds of each track on a CD, so you can find a specific track. 3-Beam Laser Tracking System - improves the quality of the CD changer's sound.
10 Disc CD Changer (120-2182) Preparation Faxback Doc. # 57809 A Look At Your Cd Player The CD changer includes the following components: CD Changer CD Magazine CD Changer Controller Audio Adapter (FM.
your vehicle. IMPORTANT: To avoid damage to your stereo, CD changer and your vehicle's electrical system, you must follow the order of installation shown in this manual, including instructions for making connections and testing.
connect both components with the supplied 16-foot (5 meter) CD changer cable. Do not mount the CD changer anywhere in your vehicle that is exposed to direct sunlight (such as the front or rear deck) or extreme heat (such as the engine compartment). Direct sunlight or extreme heat can damage CDs and the CD changer.
three transport screws from the bottom of the CD changer. Note: If you do not remove the shipping screws from the CD changer, the changer will not operate. Save the shipping screws in case you might want to install the CD changer in another vehicle. You can secure them to the back of the CD changer with a piece of tape.
10 Disc CD Changer (120-2182) Installation Faxback Doc. # 57810 Before you mount the CD changer and its components, test it by temporarily making all the required connections. CAUTIONS: For added safety and to protect your CD changer and sound system, disconnect the cable from your vehicle battery's negative (-) terminal before you begin.
2. Connect the Audio Adapter's antenna plug to your sound system's antenna jack. 3. Connect the Audio Adapter's black ground wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle's frame. Be sure that the screw is not insulated from the chassis by a plastic part.
3. Connect the black ground wire to a chassis ground, such as a metal screw attached to a metal part of the vehicle's frame. Be sure that the screw is not insulated from the chassis by a plastic part.
If everything is connected correctly, make sure the connections are correctly marked or identified. Then follow the instructions in "Mounting the Components," below. Mounting The Components Before you mount the CD changer and its components, be sure it is connected correctly.
the vehicle's dashboard. Mounting the CD Changer Controller The supplied hook-and-loop fastener lets you securely mount the CD changer controller on the dashboard and easily remove it when you need it. Select a mounting location, then follow these steps to secure the controller.
10 Disc CD Changer (120-2182) Operation Faxback Doc. # 57811 Loading And Unloading The CD Magazine You can load as many as ten CDs in the supplied CD magazine. 1. Hold the CD magazine so the clear CD window faces you and the highest CD number (10) is at the top of the CD window.
4. Slide the CD changer's door all the way to the left to close it. To unload the CD magazine from the CD changer, slide the CD changer's door open, then press EJECT to eject the magazine. Note: The CD changer must be connected to power to eject the magazine.
continues until you stop the CD changer. Press >|| while a CD is playing to temporarily stop play. || appears on the display. Press >|| again to resume play. Note: When play is paused for 5 minutes, the CD changer automatically turns off. To stop play and turn off the CD changer, press OFF.
current disc plays repeatedly. Press REPEAT again to end repeat play. Shuffle Play Press SHUFFLE. SHUFF appears, and the tracks on the current disc play in random order. When all tracks on the current disc have played, they play again in a different order.
10 Disc CD Changer (120-2182) Troubleshooting Faxback Doc. # 57812 If your CD changer is not working as it should, these suggestions, might help you eliminate the problem. If the CD changer still does not operate properly, take it to your local RadioShack store for assistance.
CD magazine not loaded Load the CD in the CD changer. Magazine in the CD changer. CD loaded upside down Load the CD in the CD magazine. correctly. CD is dirty or defective. Clean the CD (see "CD Care Tips" in Faxback Doc. # 57813). Try another CD.
cannot eliminate these static sounds. CD magazine does not CD changer requires Turn on your eject from CD changer power to eject CD Vehicle's ignition when it is pressed. Magazine. And try again. Check the CD changer's and sound system's fuses and replace them if necessary (see "Replacing a Fuse" in Faxback Doc.
10 Disc CD Changer (120-2182) Care and Maintenance Faxback Doc. # 57813 Your 10 Disc CD Changer System is an example of superior design and craftsmanship. The following suggestions will help you care for your CD changer so you can enjoy it for years. Keep the CD changer dry.
If you cannot eliminate the interference, the FCC requires that you stop using your CD changer. CD Care Tips Even though a CD is very durable, you should handle it with care. We recommend the following precautions. Keep the CD in its protective case or sleeve when you are not playing it.
replace the fuse from one or more of the power wires with one of the supplied fuses. Check all fuses. The fuse for the yellow power wire on the CD changer must be 5.0 amps. On the Audio Adapter, the red power wire's fuse should be 0.5 amps, while the yellow continuous power wire's fuse must be 5 amps.
10 Disc CD Changer (120-2182) Specifications Faxback Doc. # 57814 CD Changer: Frequency Response: 20 Hz: ...................................... +/- 3 dB 10 kHz: ..................................... +/- 3 dB 20 kHz: ...................................
(FM Modulator and Ground Isolator): .... 1 x 4-1/8 x 3-9/16 Inches (26 x 105 x 90 mm) Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
An important point after buying a device Radio Shack 120-2182 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Radio Shack 120-2182 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Radio Shack 120-2182 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Radio Shack 120-2182 you will learn all the available features of the product, as well as information on its operation. The information that you get Radio Shack 120-2182 will certainly help you make a decision on the purchase.
If you already are a holder of Radio Shack 120-2182, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Radio Shack 120-2182.
However, one of the most important roles played by the user manual is to help in solving problems with Radio Shack 120-2182. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Radio Shack 120-2182 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
