Instruction/ maintenance manual of the product DV400S Quadra-Fire
Go to page of 32
This appliance may be installed in an aftermarket, permanently located, Manufactured (Mobile) Home, where not prohibited b y Local Codes. This appliance is only for use with the type of fuel indicated on the Rating Plate. This appliance is not con vertible for use with other gases, unless a cer ti- fied Con version Kit is used.
March 4, 2002 Page 2 30211C D V400S DIRECT VENT R OOM HEA TER R Aladdin Hearth Products welcomes you to our tradition of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality , durability , and performance.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 3 30211C R T able of Contents Saf ety Precautions 4 Listings and Code Approv als 5 Ratings Label 5 Description of the D V400S Room Heater 6 Heater System Components 7 Clearances 8 T ermination 9 A. Hor izontal T ermination 10-13 B.
March 4, 2002 Page 4 30211C D V400S DIRECT VENT R OOM HEA TER R 1. PLEASE READ THESE INST ALLA TION INSTRUCTIONS COMPLETEL Y BEFORE BEGINNING INST ALLA TION PROCEDURES . F AILURE T O FOLLO W THEM COULD CA USE AN APPLIANCE MALFUNCTION RESUL TING IN SERIOUS INJUR Y AND/OR PROPER TY D AMA GE.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 5 30211C R DV400S Direct V ent Gas Serial Label Part No. 250-5910 - Beginning Serial # 000,000 - Size: 7.25" x 7.25" Adhesive Foil/Black letters on Silver/Slit back DO NOT REMOVE THIS LABEL / NE P AS ENLEVER L’ÉTIQUETTE Made in U.
March 4, 2002 Page 6 30211C D V400S DIRECT VENT R OOM HEA TER R DESCRIPTION OF THE HEA TER SYSTEM The D V400S is a Direct V ent Room Heater . Comb ustion air is supplied from outside, not from inside the house as with other types of heaters. TYPICAL ASSEMBL Y The installation of this Quadra-Fire D V400S system consists of the f ollowing: 1.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 7 30211C R 839-0710 D V400S, Matte Black, NG 844-0150 F an Kit, BK95, V ar. Speed, Thermostat “ON/OFF” 844-0140 Decorativ e Glass accent - gold, DT6G 844-7850 W ar ming Shelf , Matte Black (pr .
March 4, 2002 Page 8 30211C D V400S DIRECT VENT R OOM HEA TER R Figure 1 Minimum Clearances T o Combustib les The fo llo wing c lear ances to comb us tibl es m us t be main - tai ned: Min imum cle ara nces to t he f loor - 0" Bac k o f un it t o w all - 6” Sid es of uni t to wa ll - 6 Bas e of the unit to ceili ng - 72" .
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 9 30211C R TERMINA TION Four types of T ermination are possible for this Heater: Horizontal, V ertical, Existing Masonry or Existing Class A Class .
March 4, 2002 Page 10 30211C D V400S DIRECT VENT R OOM HEA TER R 16' MAX. 15' MAX. VENTING CAN ONLY TERMINATE WITHIN THIS AREA. 2' MIN. 10' MAX. 15" MIN. 4' 29" 59 1 / 2 "* * MINIMUM VENT HEIGHT (CENTER) (SEE NOTE) Note: A horizontal run of vent must have a 1/4" rise for every 1 ft.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 11 30211C R A B C F G A V K J N V = vent terminal A = air supply inlet Openable Fixed Closed V V V E D B L V H M = area where terminal is not permitted I A Fig. 3 - HORIZONT AL TERMINA TION REQUIREMENTS A.
March 4, 2002 Page 12 30211C D V400S DIRECT VENT R OOM HEA TER R NO TE: For b uildings with vin yl siding, a Vinyl Siding Standoff should be installed between the vent cap and the exterior wall. Attach the Vinyl Siding Standoff to the Horizontal V ent T ermination.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 13 30211C R The Dura-Vent GS is unitized and twist-locks together. For the twist-lock procedure, consult Figure 5 and do the following: (1) Four in.
March 4, 2002 Page 14 30211C D V400S DIRECT VENT R OOM HEA TER R B. Vertical Termination. The following figures are the maximum distances from the top of the unit, as well as the minimum air space clearances that must be maintained: Maximum straight unsupported rise - 25'; Maximum height - 40' from the top of the unit.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 15 30211C R To attach a straight section to the top of the Heater, with the female end down, slide that pipe over the outer Collar on the Heater while the Vent Inner slips into the Flue of the Heater.
March 4, 2002 Page 16 30211C D V400S DIRECT VENT R OOM HEA TER R C. Existing Masonry Chimney Installation This installation is subject to local jurisdic- tion. Some codes may require the use of another liner for intake air. If so, the 4” aluminum liner should be inside a 6” UL 181 listed liner.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 17 30211C R Figure 12 Masonry T ermination RIGID FLASHING (ATTACHED TO CHIMNEY WITH SCREWS WITH SILICONE SEALANT UNDERNEATH) SILICONE SEALANT VTA 6.
March 4, 2002 Page 18 30211C D V400S DIRECT VENT R OOM HEA TER R Figure 13 Retro-Fit to Metal Chimney VERTICAL TERMINATION CAP VERTICAL TERMINATION ADAPTER UL1777 LISTED 4'' GAS VENT FLEX LINER EXISTING CLASS A METAL CHIMNEY (6'' MIN.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 19 30211C R GAS LINE INSTALLATION The valve is located near the lower right rear corner of the appliance. (See Figure 14.) Install the gas supply line to the valv e. For ease of installation of the unit to the supply line, a flexible connector and manual shut - off v alve are supplied.
March 4, 2002 Page 20 30211C D V400S DIRECT VENT R OOM HEA TER R HIGH AL TITUDE INST ALLA TION For U.S. installation, units are tested and approved for elevations from 0-2000 feet. When installing this unit at an elevation above 2000 feet, it may be necessary to decrease the input rating by changing the existing Burner Orifice to a smaller size.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 21 30211C R OPTIONAL A CCESSORIES A. Optional Fan Blo wer Insta llati on: 1. Rem ove t he Kn ockou t Pla te fr om th e Back shiel d of the DV40 0S by pryi ng ou t on the pl ate a nd cl ip or brea k the tabs that hold it i n pla ce.
March 4, 2002 Page 22 30211C D V400S DIRECT VENT R OOM HEA TER R W ARNING! Electrical Grounding Instructions This appliance is equipped with a three-prong (grounding) plug f or y our protection against shoc k hazard and should be plug ged directly into a prop- erly gr ounded three-prong receptac le.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 23 30211C R Figure 17 - Remov al of Sealed Glass Firebo x Entry A. Removing the Fr ont Face. 1. Loosen the thumb screw from the bottom of the unit that holds the front f ace in position. See Figure 16.
March 4, 2002 Page 24 30211C D V400S DIRECT VENT R OOM HEA TER R Bef ore operating this heater , please re view the saf ety precau- tions given on page 4 as w ell as the items listed below: 1. Check to mak e sure the logs are securely in place and the rock w ool, and Ember Chunks hav e all been placed correctly .
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 25 30211C R 1. T urn rocker s witch to OFF or the wall thermostat to lowest setting if y our unit is so equipped. 2. T urn off all electr ic pow er to the appliance if ser vice is to be performed. 3.
March 4, 2002 Page 26 30211C D V400S DIRECT VENT R OOM HEA TER R Figure 25 Air Shutter Adjustment Note: Allow the unit to cool bef ore replacing the front face.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 27 30211C R Cleaning the burner and contr ol compartment K eep the burner compar tment clean. Brush this area with a clean, dry paint br ush and v acuum at least once a year . Alwa ys turn off the gas valve and ON/OFF s witch before cleaning.
March 4, 2002 Page 28 30211C D V400S DIRECT VENT R OOM HEA TER R TR OUBLE SHOO TING Pilot Will Not Light 1. Is a gas shut-off v alv e tur ned on? 2. Is the valv e control knob tur ned to “PILO T” (See Lighting Instructions, #6, Pg. 25. 3 . Is the valv e control knob pushed in? (See Lighting instructions, Pg.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 29 30211C R Stove Design Many of the components within this gas stov e are design ed speci cally for saf ety pur poses . It is theref ore imperativ e that only cer tied gas ser vice technicians should ser vice this appliance.
March 4, 2002 Page 30 30211C D V400S DIRECT VENT R OOM HEA TER R ** If any of the or iginal wiring as supplied with the heater must be replaced, it must be replaced with T ype 18 ga.
D V400S DIRECT VENT R OOM HEA TER March 4, 2002 Page 31 30211C R Lifetime Warranty LIFETIME W ARRANTY The Aladdin Hearth Products limited Lifetime W arranty guarantees that the following components will work as designed for the lifetime of the stove or Aladdin Hearth Products will repair or replace them.
Attention INST ALLER Please return these Operating & Installation Instructions to the Consumer.
An important point after buying a device Quadra-Fire DV400S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Quadra-Fire DV400S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Quadra-Fire DV400S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Quadra-Fire DV400S you will learn all the available features of the product, as well as information on its operation. The information that you get Quadra-Fire DV400S will certainly help you make a decision on the purchase.
If you already are a holder of Quadra-Fire DV400S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Quadra-Fire DV400S.
However, one of the most important roles played by the user manual is to help in solving problems with Quadra-Fire DV400S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Quadra-Fire DV400S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
