Instruction/ maintenance manual of the product 1900 Quadra-Fire
Go to page of 14
PLEASE READ ALL OF THE OWNERS MANUAL AND SAFETY NOTES IMPOR T ANT SAFETY NOTES: 1. When installing your stove, particular attention should be paid to fire protection.
Page 2 T ABLE OF CONTENTS Safety label ................................................................................................................... ...................... 3 Pedestal and leg model dimensions .....................................
Page 3 1900 SAFETY LABEL (found on back of stove) Manufactured by: Model: Quadra-Fire 1900 Serial No. Page 26 ACCESSORIES AND SER VICE P AR TS ACCESSORIES 831-1621 T op shield, black 831-1750 Outside .
Page 4 DIMENSIONS FIGURE 2 FIGURE 1 LEG MODEL PEDEST AL MODEL 22 1/2" (5 72mm) 16 1/4" (4 13mm) 19 5/16" ( 491mm) 26 3/4" (6 80mm) 1 1 5/16 " (287m m) 29 3/4" (7 56mm) 2&.
Page 5 Minimum clearances to Combustible Materials (in inches and millimeters) for Quadra-Fire 1900 Standard Stove Chimney & Installation Clearance Connector A B C D E F G Residential Standard Not.
Page 6 SAFETY LISTING The Quadra-Fire 1900 is listed by OMNI-T est Laboratories, Inc., Beaverton, Oregon, to UL 1482 and ULC S627. It is also approved for mobile home installations with outside combustion air in the U.S. (see pages 14 and 15 for further details).
Page 7 CHIMNEY CONNECTO R The chimney connector must be 6 (152mm) diameter with a minimum thickness of 24 gauge. Do not use aluminum or galvanized steel. They cannot properly withstand the extreme temperatures of a wood fire. Do not use chimney connector pipe as a chimney .
Page 8 A chimney inside the house must have at least 2 (50mm) of clearance to the combustible structure. A chimney outside the house must have at least 1 (25mm) clearance to the combustible structure. Firestops must be installed in the spaces where the chimney passes through floors and/or ceiling (Figure 5).
Page 9 A chimney must be the required height above the roof or other obstruction for safety and proper draft operation. The chimney must be a minimum of 3 (914mm) higher than the highest point wher.
Page 10 2. THIMBLE : An approved thimble must be used when the connection from the stove is made through a combustible wall to a masonry chimney . There are several methods you can use for connection through a combustible wall, two of which are illustrated in this manual.
Page 1 1 Minimum 3 ½ (89mm) [4 (102mm) nominal] thick solid bricks are to be used. The fire clay liner (ASTM C35 or equivalent), 5/8 (16mm) wall thickness, must not penetrate into the chimney beyond the inner surface of the chimney flue liner and must be firmly cemented in place.
Page 12 First, build the frame for the thimble, making sure that it is no smaller than 14½ (368mm) diameter , which will maintain a 2 (50mm) air space around the chimney section. Attach the wall spacer to the chimney side of the frame. Then insert the frame into the opening, toe-nailing it to the wall studs.
Page 13 CONNECTION TO A MET AL PREF ABRICA TED CHIMNEY When a metal prefabricated chimney is used, the manufacturer s installation instructions must be followed precisely .
Page 14 MOBILE HOME INST ALLA TION Y ou must use a Quadra-Fire 1900 outside air kit (see page 15 for part numbers) for installation in a mobile home. Use of alternative material will void warranty . 1. An outside air inlet must be provided for combustion and be unrestricted while unit is in use.
An important point after buying a device Quadra-Fire 1900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Quadra-Fire 1900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Quadra-Fire 1900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Quadra-Fire 1900 you will learn all the available features of the product, as well as information on its operation. The information that you get Quadra-Fire 1900 will certainly help you make a decision on the purchase.
If you already are a holder of Quadra-Fire 1900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Quadra-Fire 1900.
However, one of the most important roles played by the user manual is to help in solving problems with Quadra-Fire 1900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Quadra-Fire 1900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
