Instruction/ maintenance manual of the product PLDVD48 PYLE Audio
Go to page of 36
OWNER’S MANUAL Mobile Audio/V ideo System • Digital Audio Out-Coaxial • PLL Synthesizer Stereo Radio • DVD Player • Automatic Memory Storing • Fold Down Detachable Panel • Preset Equaliz.
2 Compatible with P AL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recor ded in either P AL or NTSC format. • A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder , video D/A converter , and audio decoders.
3 CONTENTS Safety Information ........................................................................................ 4 Disc Notes ..................................................................................................... 5 Installation ..
4 CAUTION: MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. BE SURE TO OPERA TE THE MOBILE DVD PLA YER CORRECTL Y AS INSTRUCTED.
DISC NOTES 5 Disc formats supported by this player DVD 12 cm disc Video CD 12 cm disc CD 12 cm disc MP3 12 cm disc Handling and Cleaning • Dirt, dust, scratches and warping discs will cause misoperation. • Do not place stickers or make scratches on discs.
6 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective. Bending open the appr opriate tabs behind the dashboard to secur e the sleeve in place.
INST ALLA TION DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
9 USING THE DET ACHABLE FRONT P ANEL T o Detach the Fr ont Panel 1. Pr ess the OPEN button (OPEN) , then the front panel will be folded down. 2. Remove the fr ont panel by pulling its middle-hand side outward. 3. For safekeeping, stor e the front panel in the supplied protective case immediately after being removed.
MUTE WHILE TELEPHONING If your unit is connected to a mobile telephone through the telephone mute line, the car radio ’ s volume will be muted as soon as you “ pick up ” the telephone.
LOCA TION AND FUNCTION OF KEYS THE PLA YER 11 When remove the fr ont panel: 1. (PWR/ILL) 2. 3. 4. DISP 5. IR 6. MODE/(SW) 7. OPEN 8. V acuum Fluorescent Display 9. MUT/ENT 10. ST/LOC/TITLE 11. VOL+ 12. VOL- 13. MENU/BAND 14. 1-6 preset buttons 15. SMART 16.
12 REMOTE CONTROL LOCA TION AND FUNCTION OF KEYS 9 4 8 6 10 7 3 5 27 12 11 23 16 17 14 13 24 1 2 25 28 31 30 26 29 20 15 18 22 21 19.
13 LOCA TION AND FUNCTION OF KEYS 1. POWER/ILL Press it to turn the unit on. When system is on, press shortly to contr ol the brightness of VFD. Press it for several seconds to turn off the unit. 2. SMART (DISC) In DVD mode, press it shortly to enter SMAR T MODE function.
Loading a Disc When all connections have completed, you can load a disc as follow: 1. T urn the ignition on to the accessory position. 2. Press the PWR/ILL button on the front panel or POWER/ILL button on the remote contr ol to turn on the unit. 3. Press OPEN button on the front panel to fold down the panel.
15 OPERA TION VOL BASS TRE MID BAL F AD (Volume) (Bass) (T reble) (Middle) (Balance) (Fader) BASIC OPERA TION SWITCHING ON/OFF THE UNIT AND ILLUMINA TING Press PWR/ILL button on the fr ont panel or POWER/ILL button on the remote contr ol to turn on the unit.
RADIO OPERA TION SWITCHING TO RADIO MODE Press MODE on the front panel or MODE on the remote contr ol to select radio mode, the radio mode appears in the display together with the memory band and frequency .
DISC (DVD/VCD/CD/MP3) OPERA TION STOPPING PLAY - Briefly press the AMS/STOP button on the front panel or AMS (STOP) button on the remote contr ol to stop the unit playback, when the button is pressed, normal playback will continue. - Pr ess AMS/STOP button or AMS (STOP) button twice to stop the playback and go back to initial T rack/Chapter .
on the remote contr ol at the start of the requir ed passage, then press A-B button again at the end of the passage. T o revert to normal playing, press A-B button again.
ON-SCREEN DISPLAY FUNCTION Press the DISPLA Y button during playback to display the contents of the current disc on the scr een. Example: FOR DVD: (1) Press DISPLA Y for the first time: Title Number ,.
(4) Pr ess DISPLA Y for the fourth time: (5) Pr ess DISPLA Y for the fifth time: The message on the screen will be clear ed. FOR MP3: (1) Press DISPLA Y for the first time: (2) Press DISPLA Y for the second time:. (3) Press DISPLA Y for the thir d time: The message on the screen will be clear ed.
21 OPERA TION SMART MODE FUNCTION In DVD mode, press SMAR T button on the DVD unit or SMART button on the remote contr ol shortly during disc playback to activate SMART MODE function and “ SMART MODE ” appears on the display of the DVD unit.
CDC OPERA TION Y ou can connect a CD changer to the unit with CDC operation version only . Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions supplied with your CD changer .
REPEA TING INDIVIDUAL TRACKS OR WHOLE CDs Press RPT button on the DVD unit shortly to continuously repeat the same track. Press and hold RPT button on the DVD unit for several seconds to continuously repeat all tracks on the curr ent disc. Press it again to stop r epeat.
INITIAL SETUP SETUP MENU --- MAIN P AGE 1. Press SETUP on the r emote control or on the DVD unit in the stop mode.(Press the stop button twice to ensure that the player is in STOP mode.) 2. The initial SETUP menu is displayed. 3. Select the preferr ed item by using the / buttons.
25 --- GENERAL P AGE --- PIC mode setup Select AUTO, the player PIC mode will depend on DVD disc. Select HI-RES format for best image resolution. Select N-FLICKER format on image or picture with noise or distortion.
26 SETUP --- GENERAL P AGE --- SCR SA VER setup Select the SCR SA VER ON/OFF . SPEAKER SETUP --- SPEAKER SETUP P AGE --- This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.
PREFERENCES SETUP --- PREFERENCES P AGE --- TV type setup This player can play discs recor ded in either P AL or NTSC format. Select NTSC format, when you connected to NTSC TV . Select P AL format, when you connected to P AL TV . Select AUTO format, the player TV output format will be according to the DVD disc format.
--- PREFERENCES P AGE --- SUBTITLE language setup Select the preferr ed SUBTITLE language by using the cursor buttons. --- PREFERENCES P AGE --- DISC MENU language setup Select the preferr ed DISC MENU language by using the cursor buttons.
--- PREFERENCES P AGE --- DEF AUL TS Select reset to r evert to factory initial settings. --- PREFERENCES P AGE --- SMART NA V If selected WITH MENU mode, when playing an MP3 disc, the smart navigation menu will appear on the screen, then the user can select a track to play according to the menu hint.
DEF AUL TS T ABLE General Setup TV Display Normal/LB PIC Mode AUTO Angle Mark ON OSD Language English Captions ON SCR Saver ON Speaker Setup Downmix Stereo Audio Setup SPDIF OFF OP Mode Line Out Dynam.
If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty . Only qualified service personnel can remove the cover or service this player .
32 SPECIFICATIONS GENERAL P o wer Supply Requirements : DC 12V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - Treble (at 10 KHz) : ± 10 dB Maximum Output P ower : 4 x 40 watts Current Drain : 15 Ampere (max.
33 SPECIFICA TIONS Supply voltage: Compositive video 1.0Vp-p 75 Ω Discs played: (1) 5 ” (12 cm) DVD-VIDEO disc (2) Compact disc (CD-DA/CD-R/CD-RW/MP3) (3) 5 ” (12 cm) VIDEO CD Note: Specifications and design are subject to modification, without notice, due to improvements in technology .
.
.
88-V1623-02.
An important point after buying a device PYLE Audio PLDVD48 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLDVD48 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLDVD48 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLDVD48 you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLDVD48 will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLDVD48, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLDVD48.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLDVD48. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLDVD48 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
