Instruction/ maintenance manual of the product AT-PL50 Audio-Technica
Go to page of 8
Automatic Ster eo T ur ntable System A T -PL50 Installation and Operation.
2 Automatic Ster eo T ur ntable System Installation and Operation T o prevent electric shock, do not remove the cover . There are no user-serviceable parts inside. Internal adjustments are for qualified professionals only . Refer all servicing to qualified service personnel.
3 Initial Setup Setting the Pre-amp Switch For incr eased flexibility of use, this turntable has an internal stereo phono pre-amplifier . The Pre-amp Selector Switch is located under the turntable platter , in the rear -center (Fig.
4 Operation Automatic Operation 1. Remove the stylus guard from the stylus assembly (Fig. 3). 2. Put a record on the turntable. If needed, use the 45 rpm adapter (Fig. 4). 3. Select the size of record: 12" or 7" (Fig. 5). 4. Select the speed: 33 1 / 3 rpm or 45 rpm (Fig.
5 Replacing the Stylus While holding the head of the tone ar m, rotate the front of the stylus assembly in a forward and down motion to remove it (Fig. 8). (As you remove the old assembly , note its position and “feel,” to aid in properly installing the new one.
6 T roubleshooting T urntable does not operate 1. Make certain the turntable’ s AC cord is plugged into an AC outlet, and that the AC outlet is “live.” 2. Check the drive belt to make certain it is on correctly . (See Figur e 10.) A) Remove the record mat from the turntable platter (Fig.
7 T urntable operates, but no sound at all 1. The stylus guard is still in place. 2. The tone arm Lift button is pressed in. 3. Amplifier controls set incorrectly: wrong input select- ed, tape monitor on, speakers switched off, etc. 4. Check the stylus on phono cartridge for correct place- ment.
Audi o - T echnica U . S ., Inc., 1 2 2 1 Commer ce Drive, Stow , Ohio 4 4 2 2 4 330/ 686 -2600 www .audio-technica.com P51465-01 ©20 0 6 Audio - T echnica U .S., Inc. Printed in China V isit our Web Site: www .audio-technica.com On e - Y ear Limited Warranty A udio - T echnica brand products purchased in the U.
An important point after buying a device Audio-Technica AT-PL50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio-Technica AT-PL50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio-Technica AT-PL50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio-Technica AT-PL50 you will learn all the available features of the product, as well as information on its operation. The information that you get Audio-Technica AT-PL50 will certainly help you make a decision on the purchase.
If you already are a holder of Audio-Technica AT-PL50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio-Technica AT-PL50.
However, one of the most important roles played by the user manual is to help in solving problems with Audio-Technica AT-PL50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio-Technica AT-PL50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
