Instruction/ maintenance manual of the product NETWORK IP TESTER Psiber Data Systems
Go to page of 9
P INGER TM NETWORK IP TESTER USERS GUIDE.
BOX CONTENTS _ Pinger Network IP T ester _ AC Adapter _ Four AA Alkaline Batteries _ User Guide B A TTER Y The Pinger operates on four AA alkaline batteries. Remove the battery cover at the back of the unit and insert the batteries with the orientation as shown.
OPERA TION T o test a hub or switch, connect a patch cable from the RJ-45 port on the equipment to the RJ-45 jack marked LAN on the Pinger. T o test a NIC or most routers, connect a patch cable to the RJ-45 jack marked NIC on the Pinger. LINK SCREEN Turn on the Pinger by pressing the PWR button.
PING, Dupe IP Error is displayed indicating a duplicate IP address is present on the network. If no PING response is received within ten seconds, No Response is displayed. When the PINGed IP address is in a different subnet than the Pinger IP address, the unit first attempts to locate the default gateway .
DHCP SCREEN Pressing the DHCP function key in the Link Screen presents the DHCP Screen and begins the DHCP client-server test. Note: The MAC Address of the Pinger may have to be added to the Access List of the Default Gateway for the Pinger messages to be accepted - see your System Administrator for Gateway requirements.
POR T ID SCREEN Pressing the PortID function key in the Link Screen presents the Port ID Screen. As soon as this screen appears, the Pinger begins transmitting a pattern of Link signals that will cause the hub,switch or NIC Link LED to blink or stay on continuously .
The information is retained even if the unit is turned off or the batteries are removed. T o remove an entry from the list, press the right cursor key to select the entry and then press the star key . A Delete Entry message is displayed and pressing the SAVE function key clears the selected name and IP Address.
POWER Duration - The Pinger will typically provide 10-12 hours of operation from a set of four AA alkaline batteries. An AC adapter is also provided which will power the unit but does not recharge the batteries.
MESSKOM MES SKOM VE RT RIE BS GMBH Ih r Vertriebspartner für M esst echnik IS DN A DSL Kabelt ester Netzwerktes ter A uf u nsere r INTERN ET - Seite : Programm-Üb ersicht mit Preisen und !!! Kostenlose Upd ates für die Tester und Software von AETHRA!!! www .
An important point after buying a device Psiber Data Systems NETWORK IP TESTER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Psiber Data Systems NETWORK IP TESTER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Psiber Data Systems NETWORK IP TESTER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Psiber Data Systems NETWORK IP TESTER you will learn all the available features of the product, as well as information on its operation. The information that you get Psiber Data Systems NETWORK IP TESTER will certainly help you make a decision on the purchase.
If you already are a holder of Psiber Data Systems NETWORK IP TESTER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Psiber Data Systems NETWORK IP TESTER.
However, one of the most important roles played by the user manual is to help in solving problems with Psiber Data Systems NETWORK IP TESTER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Psiber Data Systems NETWORK IP TESTER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
