Instruction/ maintenance manual of the product PRO-JECT RPM 5 Pro-Ject
Go to page of 8
INSTRUCTIONS FOR USE Pro-Ject RPM 5.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20.2.06/1 .5.06 2 1 1.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20. 2.06/1.5.06 3 PRO-JECT RPM 5 Controls, features and connections 1 Motor transportation screw (marked red) 2 Stepped drive pulley 3 Drive belt * 3a.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20.2.06/1 .5.06 4 Set-up Screw the three feet (23) onto the threaded bolts loca ted on the underside of the plinth. Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20. 2.06/1.5.06 5 Adjusting the vertical tracking angle (vta) Put a record and the record we ight on the platter. W hen the needle is lowered into the record groove and the tonearm is not resti ng on the lift arm, the tube of the tonearm sho uld be parallel to the su rface of the reco rd.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20.2.06/1 .5.06 6 Mains power connection The turntable is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20. 2.06/1.5.06 7 Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory.
© Audio Trade GmbH · Pro-Ject RPM 5 · Revision 20.2.06/1 .5.06 8 Accessories P ower supply T onearm counterweight Platter T onearm transport lock Please remove feet bevore repacking !.
An important point after buying a device Pro-Ject PRO-JECT RPM 5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pro-Ject PRO-JECT RPM 5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pro-Ject PRO-JECT RPM 5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pro-Ject PRO-JECT RPM 5 you will learn all the available features of the product, as well as information on its operation. The information that you get Pro-Ject PRO-JECT RPM 5 will certainly help you make a decision on the purchase.
If you already are a holder of Pro-Ject PRO-JECT RPM 5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pro-Ject PRO-JECT RPM 5.
However, one of the most important roles played by the user manual is to help in solving problems with Pro-Ject PRO-JECT RPM 5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pro-Ject PRO-JECT RPM 5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
