Instruction/ maintenance manual of the product TX-208 Prince Castle
Go to page of 10
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 T T OASTER OASTER TX-208 TX-208 Operation Operation Manual Manual 355 East Kehoe Blvd. • Carol Stream, IL 60188 Phone: 630-462-8800 • T oll Free: 1-800-PCASTLE Fax: 630-462-1460 • www .princecastle.
TX-208 537-5 1 1 re vB Printed in USA 0324 © 200 3 2 TOASTER TX-208 Product Identification Electrical Specifications Installation Model No. V olts W atts Amps Hz TX-208 208 4000 19.2 60 Safety Information Remove the unit from the carton and inspect for signs of damage.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 3 TOASTER TX-208 Operation 1 Power On/Off Button Display T emperature LED’s Press the On/Off Button to turn the unit on.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 4 TOASTER TX-208 Power On/Off Button Press the On/Off Button to turn the unit off. 3 Remove the lower retaining bar from the release sheet and pull the release sheet up thru the top of the unit. Remove the upper retaining bar from the release sheet.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 5 TOASTER TX-208 6 Release the upper and lower locking latches from the conveyor rollers. Upper Latch 7 Remove the conveyor belt. Rotate the belt while removing it from the side of the unit. Lower Latch Reassemble the unit by reversing steps 1 - 8.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 6 TOASTER TX-208 Programming Power On/Off Button Set Button Scan Up/Actual T emp Button Display Program LED Actual T emperature LED Setpoint LED Scan Down Button Control Panel L O 1 Press the On/Off button.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 7 TOASTER TX-208 T roubleshooting Unit will not heat up. Unit heats up but conveyor will not run. Buns under or over done. No power to unit. Inoperable power cord. Loose connection on power switch. Inoperable power switch.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 8 TOASTER TX-208 Parts List & Exploded V iew 14 15 16 17 18 19 20 21 12 11 3 2 1 5 4 10 7 6 8 9 22 43 24 30 38 39 41 40 44 33 15 42 29 25 36 37 35 34 27 26 28 23 32 45 46 47 13 1 537-324 Front Cover 2 537-618 Bun Chute 3 537- 725S Rubber Belt 4 537-330S Conveyor Ass y .
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 9 TOASTER TX-208 Parts List & Exploded V iew 16 17 6 2 3 8 4 7 5 14 9 13 1 10 12 11 15 1 537-351 Frame 2 537-354 Air Shield 3 537-349 Cross Brac.
TX-208 537-5 1 1 rev B Printed in USA 0324 © 200 3 10 TOASTER TX-208 Wiring Diagram PLA TEN HEATER RELA Y RED BLK VIO BLK TRANSFORMER YEL YEL BLK BLK NOT USED POWER RELA Y WHT RED NC C NO WHT WHT BLK.
An important point after buying a device Prince Castle TX-208 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Prince Castle TX-208 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Prince Castle TX-208 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Prince Castle TX-208 you will learn all the available features of the product, as well as information on its operation. The information that you get Prince Castle TX-208 will certainly help you make a decision on the purchase.
If you already are a holder of Prince Castle TX-208, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Prince Castle TX-208.
However, one of the most important roles played by the user manual is to help in solving problems with Prince Castle TX-208. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Prince Castle TX-208 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
