Instruction/ maintenance manual of the product CDP 2.0 Audio Analogue
Go to page of 16
AUDIO ANALOGUE PRIMO COMPACT DISC PLAYER OWNER’S MANUAL MANUALE D’ISTRUZIONI.
2.
3 Dear Audiophile, Congratulations and thank you for choosing Pr imo CD. You’re now the owner of a unit t hat establishes a new reference in the category of high-quality and high-versatilit y stereophonic products. Primo CD provides circ uital solutions with no compromises and features capable to satisfy adv anced users’ demands.
4.
5 INTRODUCTION AUDIO ANALOGUE does not take any responsibilities in the following cases: Whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected.
6 PREMESSA AUDIO ANALOGUE non accetta responsabilità nei casi in cui: Le procedure operative di utilizzo e manutenzione de ll’apparato descritte nel manu ale non siano rispettate.
7 15 2 3 4 Front panel 1) STANDBY, STOP/OPEN. Multi-functional button. By pressing this button, CD playback is interrupted if the CD player is in play mode. When the CD player is in the stop mode, by pressing th is button t he CD tray is opened/closed.
8 1 2 3 4 Back panel 1) S/PDIF DIGITAL OUT. Digital out connector. 2) RIGHT OUT. Right analog out connector. 3) LEFT OUT. Left analog out connector. 4) Power cord. Descrizione del pannello posteriore 1) S/PDIF DIGITAL OUT. Connettore di uscita digitale.
9 Remote control – CD player section • PLAY/PAUSE. By pushing this button, you start CD playback or interrupt/resume CD playback (pause). • STP/OPEN.
10 Descrizione del telecomando – sezione CD PLAYER • PLAY/PAUSE. La pressione di questo tasto attiva la riproduzione del disco oppure attiva o disattiva il momentaneo arresto della lettura (pausa) quando il CD è già in riproduzione. • STOP/OPEN.
11 Where to place Primo CD Primo CD is a unit that may generate heat. Please locate the unit in a well-ventilated place. In particular, you should leave at least 5cm around and above the unit and avoid placing it close to heat sources (radiators, heaters, amplifiers, television sets).
12 Correct power phase Due to the asymmetric structure of the power transformer winding, it is very important to correctly plug Primo CD according to the power phase. Only one of the two possible power pluggings guarant ees the best playback performance.
13 Specifications Parameter Measurement conditions Value Channels: - 2 Maximum output voltage: 0DBFS 2.5Vpp Frequency response: +0/-3dB 20Hz-20kHz Noise level: Band limits0Hz-20kHz Signal/noise ratio:.
14 TROUBLESHOOTING Symptom Cause Remedy The unit is in standby mode Exit the standby mode by pressing the “STANDBY” button on the front panel or the “STBY” button on the remote controller Powe.
15.
16 Audio analogue Head Office Ufficio commerciale : Via C. Bottai, 88B - 51015 Monsummano Terme (PT) Italy tel. 0572 954513 fax 0572 954010 R&D Laboratory Laboratorio ricerca e svilupp o: Via XX Settembre, 47 - 56017 San Giuliano Terme (PI) Italy www.
An important point after buying a device Audio Analogue CDP 2.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audio Analogue CDP 2.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audio Analogue CDP 2.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audio Analogue CDP 2.0 you will learn all the available features of the product, as well as information on its operation. The information that you get Audio Analogue CDP 2.0 will certainly help you make a decision on the purchase.
If you already are a holder of Audio Analogue CDP 2.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audio Analogue CDP 2.0.
However, one of the most important roles played by the user manual is to help in solving problems with Audio Analogue CDP 2.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audio Analogue CDP 2.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
