Instruction/ maintenance manual of the product MCI 15T Preh
Go to page of 9
MCI Touch MCI T ouch User ’ s Guide MCI 15T MCI 15 USA, Canada and Latin America Preh Electronics 590 T elser Rd Unit B Lake Zurich IL 60047 Phones: 800 577 7734 847 438 4000 Fax: 847 438 5522 prehsales@prehusa.com www .prehusa.com Germany and rest of the world Preh GmbH An der Stadthalle D-97616 Bad Neustadt a.
T able of Contents Usage Notice........................................................................4 Introduction...........................................................................4 Connections and Installation.............................
Usage Notice W arning: T o prevent the risk of re or shock, do not expose this product to rain or moisture. W arning: T o avoid electric shock, do not open or disassemble this product. There are no user serviceable parts in this product. Refer all service questions to Preh or a qualied service provider .
Display Setup and On Screen Display Connect and secure cables to the display and the computer , except for the USB cable. The AC cord set provided with your display should be appropriate for your region.
Power/OSD Lock/Unlock Note: There is no menu graphic for this feature. The Power/OSD lockout menu is separate from the main OSD. 1. Access this feature by rst pressing the MENU button to access the main OSD. 2. While the main OSD is displayed, press and hold the MENU button.
T ouchscreen and Peripherals Driver Installation Drivers for all supported operating systems are contained on the Preh Install Disk. T o install drivers, follow the procedures below as appropriate. T ouchscreen support is provided for Windows 98/Me/NT/2000/XP , DOS and Linux (kernels 4.
External Connections Power IEC320 Standard AC inlet Audio Standard 3mm Stereo Jack Video HD15 (VGA) T ouch Interface Standard USB series “B” receptacle Standard DB9 F Serial (MCI 15 only) Connecti.
Power Dissipation MCI 15T C2R T2 21 W max. MCI 15T C1R T4 & 40 W max. MCI 15T C2R T4 T emperature Operating 0°C to 40°C Storage -30°C to 60°C Humidity Operating 20% to 80% non-condensing Storage 5% to 90% non-condensing External Connections Power External +12VDC power pack, 5.
bright display that is very thin, and uses little power , compared with a CRT , or tube-type monitor . Lux: The standard unit for illuminance is lux (lx) which is lumens per square meter (lm/m2). 1 lux=10.764 footcandle. Common room lighting is 100-1000 lux.
An important point after buying a device Preh MCI 15T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Preh MCI 15T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Preh MCI 15T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Preh MCI 15T you will learn all the available features of the product, as well as information on its operation. The information that you get Preh MCI 15T will certainly help you make a decision on the purchase.
If you already are a holder of Preh MCI 15T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Preh MCI 15T.
However, one of the most important roles played by the user manual is to help in solving problems with Preh MCI 15T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Preh MCI 15T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
