EN
Official user manual

Preference Audio DHM-0100

22 pages·758 KB·DVD Player·PDF·ENDEFRITNLJA
Preference Audio DHM-0100
Table of Contents 29 sections Progressive Scan DVD Player · DHM-0100 · Operation Manual · RISK OF ELECTRIC SHOCK · … ShowHide
Page 1 of the Preference Audio DHM-0100 user manual — Progressive Scan DVD Player
Page 1 · click to enlarge
Page 1

Progressive Scan DVD Player

DHM-0100

Operation Manual

Preference Audio DHM-0100 — Progressive Scan DVD Player diagram (page 1)
Fig. 1 · Progressive Scan DVD Player

20050228

Page 2 of the Preference Audio DHM-0100 user manual — RISK OF ELECTRIC SHOCK
Page 2 · click to enlarge
Page 2

WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The ventillation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash with arrowhead symbol, within an equilateral trian- gle, is intended to alert the user to the presence of uninsulated "dan- gerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is in- tended to alert the user to presence of important operat- i n g a n d m a i n t e n a n c e (servicing) instructions in the literature accompanying the appliance.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.

  • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Increase the separation between the equipment and player.
  • Connect the equipment into an outlet on a circuit different from that to which the player is connected.
  • Consult the dealer or an experienced radio / TV technician for help.

SAFETY CERTIFICATION This CD player is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J.

Page 3 of the Preference Audio DHM-0100 user manual — SAFETY INSTRUCTIONS - Read before operating equipment
Page 3 · click to enlarge
Page 3

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions — All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions — The safety and operating instructions should be retained for future reference. 3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions — All operating and use instructions should be followed. 5. Water and Moisture — The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6. Carts and Stands — The appliance should be used only with a cart or stand that is recom- mended by the manufacturer. 6A. An appliance and cart combination should be moved with care. Quick stops, ex- cessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 7. Wall or Ceiling Mounting — The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in built- in installation, such as a book case or cabinet that may impede the flow of air through the ventilation openings. 9. Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10. Power Sources — The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization — The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. CAUTION: To prevent electric shock, match the wide blade of this plug to the widle slot, fully insert. Do not use this (polarized) plug with an extension cord, receptable or other outlet unless the blades can be fully inserted to prevent blade exposure. 12. Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular atten- tion to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning — The appliance should be cleaned only as recommended by the manufacturer. 14. Power Lines — An outdoor antenna should be located away from power lines. 15. Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 16. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 17. Damage Requiring Service — the appliance should be serviced by qualified service per- sonnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has spilled into the appliance; or C.The appliance has been exposed to rain; or D.The appliance does not appear to operate normally or exhibits a marked change in per-

formance; or E. The appliance has been dropped, or the enclosure damaged. 18. Servicing — The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Page 4 of the Preference Audio DHM-0100 user manual — SAFETY INSTRUCTIONS - Read before operating equipment
Page 4 · click to enlarge
Page 4

Before attempting to connect, operate or adjust this product, please read these instruc- tions completely and keep this manual for future reference.

Dear customers : May we take this opportunity to thank you for purchasing this DVD Player. We strongly recommend that you carefully study the operating instructions before operat- ing the unit.

  • Main Features
  • Front loading DVD / MP3 / CD player.
  • Built-in Dolby Digital.

Standards Video : NTSC Audio : PCM (48 or 96 kHz), 2 Channel MPEG layer 2, Dolby AC-3 & dts line out

Features of audio specifications

– DOLBY Digital 2 ch decoding output. – DTS for Digital (Coaxial) output – Linear PCM output.

Consumers should note that not all high definition television sets are fully com- patible with this product and may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the “STANDARD DEFINITION” output. If there are questions regarding our TV set compatibility with this model 525p and 625p DVD player, please contact our customer service center.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owners. Use of this copyright protection technology must be authorized by Marcrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpub- lished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

Getting Started

Page 5 of the Preference Audio DHM-0100 user manual — Disc types
Page 5 · click to enlarge
Page 5

Getting Started

Disc types

Audio & VideoDisc size 12cm single side, single layer / single side, double layer PAL and NTSC DVD disc Playback time 135min / 240min max. AudioDisc size 12cm / 8cm CD disc Playback time 74min/20min max. MP3AudioMP3 format disc

* Player is CD-R, CD-RW compatible. Note: Not all CD-R, CD-RW Discs are compatible with this player.

Region Management Information This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD player can- not play that disc.

This Region number of this DVD player is .

Disc manintenace – Before playback, wipe the disc from the center hole toward the outer edge with a clean cloth. – Never use benzine, thinner, cleaning fluid, static electricity prevention liquids or any other solvent. Note : Dirty discs may cause bad picture.

From the center to the edge

Correct · Incorrect

Page 6 of the Preference Audio DHM-0100 user manual — Safety precautions
Page 6 · click to enlarge
Page 6

Safety precautions

Page 7 of the Preference Audio DHM-0100 user manual — Rear Panel Control
Page 7 · click to enlarge
Page 7

Front Panel Control

1. Disc Tray 2. Power Indicator 3. Open/Close Button 4. Play / Pause Button
5. Stop Button 6. Remote Sensor 7. Power ON/OFF

Rear Panel Control

1. AC Power Cord 2. Y/Pb. Cb/Pr. Cr output 3. Video output (composite)
4. Analog Audio output 5. Digital Audio output (coaxial) 6. S-Video output
Page 8 of the Preference Audio DHM-0100 user manual — Remote Control Unit
Page 8 · click to enlarge
Page 8

Battery installation (remote control unit) 1. Remove the battery cover. 2. Insert two batteries (AAA) making sure the polarity (+/-) matches the marks inside the unit. 3. Replace the cover. – Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the fire. – Do not mix old and new batteries – Dispose of used batteries in accordance with local law. Note : Weak batteries can leak and severely damage

the remote control unit.

Remote Control Unit

1. Power on/off Button 2. Numeric Buttons 3. Display Button 4. Volume – Button 5. Setup Button 6. DVD Menu Button 7. Direction Buttons ( Up / Down/ Left/ Right) 8. Fast Backward Button 9. Play Button 10. Stop Button 11. Slow Button 12. Subtitle Button 13. P. Scan Button 14. Search Button 15. Audio Button 16. Zoom Button 17. Eject Button 18. Volume + Button 19. Mute Button 20. Previous Button 21. Next Button 22. Enter Button 23. Fast Forward Button 24. Step/Pause Button 25. Program Button 26. Angle Button 27. Cancel Button 28. Repeat Button 29. Repeat A-B Button

Preference Audio DHM-0100 — Remote Control Unit diagram (page 8)
Fig. 2 · Remote Control Unit

8 9 10 11 12

23 24 25 26 27

18 19 20

Page 9 of the Preference Audio DHM-0100 user manual — Connect To TV
Page 9 · click to enlarge
Page 9

Connect To TV

  • This unit provides several types of video and audio signals output. They are :
  • Y/Pb, Cb/Pr, Cr output
  • RCA output
  • S-Video Output Users can choose a suitable connection type to connect the player to TV.
1. Y/Pb, Cb/Pr, Cr output
Preference Audio DHM-0100 — Connect To TV diagram (page 9)
Fig. 3 · Connect To TV
2. Connection via Composite (RCA) Cable In this type of connection, connect the Left/Right Audio Cables (Red and White) and a Video signal (Yellow).
Preference Audio DHM-0100 — Connect To TV diagram (page 9)
Fig. 4 · Connect To TV
3. Connection via S-Video Cable
Preference Audio DHM-0100 — Connect To TV diagram (page 9)
Fig. 5 · Connect To TV
Page 10 of the Preference Audio DHM-0100 user manual — Connect To TV
Page 10 · click to enlarge
Page 10

Connection to Amplifier There are two different types of connections between the DVD player and an amplifier.

  • Digital output via Coaxial Cable (Connection 1).
  • 2 channels (left/right) Audio Output (connection 2-3)

Video output

Page 11 of the Preference Audio DHM-0100 user manual — Operation
Page 11 · click to enlarge
Page 11

Operation

TV Selection Turn on the TV, the DVD player and the Audio Amplifer System (if any). 1. Press the “TV/VIDEO” button on the TV. 2. Select the Video Mode (TV). Note: If there are more than 1 AV channel for the TV, select the channel you have connected to the DVD player. 3. Select the Correct Audio Input on the AV Amplifier (if any)

  • Play Discs 1. Press the OPEN/CLOSE button ( ) on the front panel and load the Disc on the tray. The label side should be facing upwards. For a Double-sided DVD Disc, put the disc with label A/1 up. 2. Press the OPEN/CLOSE button ( ) again to close the tray and the disc will be loaded. 3. The Disc will be played automatically.
  • If it is a DVD disc, it will show the Menu/Title Page on the screen.
  • If it is a CD, it will play the first track directly. 4. Press the STOP button ( ) if you want to stop the Disc playback. You can resume playback by pressing the PLAY button and it will start at the location where you have pressed stop (Resume Play). 5. Press the STOP button twice to have the Disc stop completely.
  • Pause /Play This function is applicable for DVD and CD audio.
  • For DVD, the picture will freeze.
  • For CD audio, the sound will be muted. 1. Press the PAUSE button ( ) to pause play. 2. Press the PLAY button again to resume Play.
  • DVD Setup Mode
  • Setup Mode provides the menu for the configuration of TV DISPLAY Mode, OSD LANGUAGE Mode and AUDIO Mode etc.
  • Item selection in the SETUP menu is done by using the Direction buttons and the ENTER button.
  • To exit the SETUP menu, press the SETUP button again.
Page 12 of the Preference Audio DHM-0100 user manual — -- GENERAL SETUP PAGE --
Page 12 · click to enlarge
Page 12
Setup Menu ItemsPress the SETUP button on the remote control. The following menu will be shown:

-- GENERAL SETUP PAGE --

TV Display LB Angle Mark On OSD Lang ENG Captions Off Screen Saver On

  • 1. GENERAL SETUP TV DISPLAY
  • Normal/PS This is selected when the DVD player is connected to a normal TV. Wide-screen images are shown on the screen, but with some parts cut automatically.
  • Normal/LB This is selected when the player is connected to a normal TV. Wide screen images are shown on the screen, with black bands on the top and bottom.
  • WIDE This is selected when the player is connected to a wide-screen TV.

Go To General Setup Page

-- GENERAL SETUP PAGE --

TV Display NORMAL/PS

Angle Mark NORMAL/LB OSD Lang WIDE

Set TV Display Mode

-- GENERAL SET UP PAGE --

ANGLE MARK This only works when there is an angle mark on the disc. Select ON, the screen shows the mark when playing DVD. - ON - OFF

TV Display Angle Mark ON

OSD Lang OFF Captions

OSD LANGUAGE This used to select the OSD language. - English - Spanish - German - French

-- GENERAL SETUP PAGE --

OSD Lang French Captions German

CAPTIONS This option can show or hide the captions. - On (Show captions) - Off (Hide captions)

-- GENERAL SETUP PAGE --

TV Display Angle Mark

CAPTIONS ON Screen Saver OFF

Show 10 more labels / short text on this page
Captions · Screen Saver · Screen Saver · Set Angle Mark · TV Display · Angle Mark English · Screen Saver Spanish · Set OSD Language · OSD Lang · Closed Caption
Page 13 of the Preference Audio DHM-0100 user manual — -- VIDEO SETUP PAGE --
Page 13 · click to enlarge
Page 13

SCREEN SAVER Start the screen saver, the screen saver image appears when the player stops or the image is frozen for a few minutes. This saver can keep the screen from being damaged. - ON (Start the screen saver) - OFF (Remove the screen saver)

-- GENERAL SETUP PAGE --

TV Display Angle Mark

Captions Screen Saver ON

OFF

SCREEN SAVER

2. SPEAKER SETUP When SPEAKER SETUP option is selected, the following menu will be shown.
  • DOWNMIX
  • LT/RT Discs recorded multi channel soundtrack, the output signal will be incorporated to left and right channel.
  • STEREO A disc recor d ed with multi-channel soundtrack will be changed to stereo.

-- SPEAKER SETUP PAGE --

Downmix LT/RT Dynamic Stereo

-- SPEAKER SETUP PAGE --

DOLBY DIGITAL SETUP • DYNAMIC This option is used to set the compression ratio in order to control the sound (volume) contrast.

Downmix FULL Dynamic 3/4

0FF

Set DRC to 1/2 Conpression

  • 3. VIDEO SETUP When VIDEO SETUP option is selected, the following menu will be shown. To select the desired item use the direction ( / / / ) button.
  • VIDEO OUT : CVBS/S-VIDEO YUV
  • VIDEO TV : P-SCAN

-- VIDEO SETUP PAGE --

Video Out CVBS/S-VIDEO TV Mode YUV

-- VIDEO SETUP PAGE --

INTERLACE Note : To select P-SCAN mode, the P-SCAN output must be connect to P-SCAN TV, otherwise the picture will be unstable.

Video Out TV Mode P-SCAN

Show 5 more labels / short text on this page
OSD Lang · Set Downmix Mode · 1/2 · 1/4 · Interlace
Page 14 of the Preference Audio DHM-0100 user manual — -- PREFERENCE SET UP PAGE --
Page 14 · click to enlarge
Page 14
4. PREFERENCE SETUP AUDIO If a language listed below is recorded on the disc, you can play the sound in that language. If not, the language recorded will be used. - English - French - Spanish - German

-- PREFERENCE SET UP PAGE --

Audio English Subtitle French Disc Menu Spanish Default German

SUBTITLE If a language listed below is recorded on the disc, you may set the subtitle to be displayed in that language. If not, the language recorded will be used. - English - French - Spanish - German - Off

-- PREFERENCE SET UP PAGE --

Audio Subtitle English Disc Menu French Default Spanish German Off Subtitle

DISC MENU If a language listed below is recorded on the disc, you can set the Menu to be displayed in such language. If not, the language recorded will be used. - English - French - Spanish - German

-- PREFERENCE SET UP PAGE --

Audio Subtitle Disc Menu English Default French Spanish German

Preference Disc Menu Languages

DEFAULT User can load the original factory settings by choosing RESET and pressing ENTER. - RESET

-- PREFERENCE SET UP PAGE --

Audio Subtitle Disc Menu Default Reset

Preference Audio Languages · Preference Menu Languages

Page 15 of the Preference Audio DHM-0100 user manual — -- PREFERENCE SET UP PAGE --
Page 15 · click to enlarge
Page 15

DVD Menu Play The DVD Menu Play function is only applicable for DVD movies. User can access the Casting information, Production History, Movie Introduction etc. directly through this function. 1. Press the DVD MENU button on the remote control to enter the Root Menu. 2. Use the Direction button () or input the item index through the Number keys (0-9) to do the selection. 3. Press ENTER to confirm the selection.

Progressive scan creates a picture with double the scan lines of traditional component video pictures and creates a sharper image. The advantages of progressive scan video output are reduced picture flickering and motion artifacts as well as a sharper image on large screens.

Audio This funciton is applicable for DVD and CD audio but with different effects. - Pressing AUDIO button will change the Audio channel.

REW / F.F. ( / ) This function is applicable for DVD and CD audio but with different effects. The FAST FORWARD key and FAST BACKWARD key are used to achieve fast play function. - For DVD, there are 5 different levels of speed (2x, 4x, 8x, 16x, 32x). Every succes- sive key press will increment the speed of quick play. - For CD audio, the FORWARD/BACKWARD will fast forward or fast reverse the music output. Note : Press PLAY button at any stage will resume at normal speed.

PREV. / NEXT ( / ) During playback, press one of the PREV. / NEXT buttons (PREVIOUS button and NEXT button) - When the PREV. button is pressed once, the player returns to the beginning of the PREVIOUS playing chapter or track. - When the NEXT button is pressed once, the player will go to the beginning of next chapter or track.

P. SCAN (PROGRESSIVE SCAN) Press this button to enter to the P-SCAN mode. Press this button again switch back to normal interlace mode. Note : To select P-SCAN mode, the P-SCAN output must be connected to a P-SCAN

TV, otherwise the picture will be unstable.

Slow F.F. The Slow Forward is applicable for DVD. There are 4 steps of slow motion speed, 1/2, 1/4, 1/8, 1/16. Successive key presses will decrement the playback speed. Note: Press PLAY button to switch back to normal playback speed.

Page 16 of the Preference Audio DHM-0100 user manual — -- PREFERENCE SET UP PAGE --
Page 16 · click to enlarge
Page 16

Repeat Mode This function is applicable for DVD and CD audio but with different effects. - For DVD disc playback, user can choose to repeat the current chapter, current title or disc. Subsequent key press of the REPEAT key can change between these three options. - For CD, user can choose to repeat the current track or the whole disc (Repeat All). Subsequent key press of the REPEAT key can change between these two options.

A – B This function is applicable for DVD and CD audio. User can specify the repeating interval by marking the starting point and the end point. 1. Press the A-B button to mark the starting point (Playback will continue). 2. Press the A-B button to mark the end point (The marked part will be repeated automatically.) Note : Press the A-B button during repetition will disable the Repeat mode.

Subtitle This function is only applicable for DVD disc. It can change the subtitle language shown on the screen. Note : The number of subtitles available depends on the DVD disc.

Angle Some discs may have multiple viewing angle playback. The ANGLE button is to select the viewing angle shown on the screen. Note : The number of playback angles depends on the disc. Not all discs have this feature.

Search This function is applicable for DVD and CD audio. Through this function, the user can access a specific location or a specific track by key in the target time or the track number. 1. Press the SEARCH button to enter the Search Mode. 2. Input the target time through the Number keys (0-9) and the player will jump to the target location immediately.

Page 17 of the Preference Audio DHM-0100 user manual — -- PREFERENCE SET UP PAGE --
Page 17 · click to enlarge
Page 17

Display (Remain Time) This function is applicable for DVD only. It will display the timing information of the playback on the screen. - For DVD playback, subsequent key presses on the DISPLAY button will show the

Title Elapsed Time, Title Remain Time, Chapter Elapse Time and Chapter Remain Time one by one.

Press the DISPLAY Button TITLE ELAPSED TT 01/04 CH 01/02 0:02:13

Press the DISPLAY Button TITLE REMAIN TT 01/04 CH 01/02 1:33:30

Press the DISPLAY Button CHAPTER ELAPSED TT 01/04 CH 01/02 0:02:15

Press the DISPLAY Button CHAPTER REMAIN TT 01/04 CH 01/02 0:02:18

Press the DISPLAY Button DISPLAY OFF

Play This function is applicable for DVD and CD audio. During the disc playback, when the STOP button is pressed once, the player will enter the Resume Play mode. At this time, if the PLAY button is pressed, the player will resume playback at the location where the STOP button is pressed. If the STOP button is pressed (i.e. STOP button is pressed twice), the player will be stop.

Zoom This function is applicable for DVD. User can enlarge a static picture or a moving picture by pressing the ZOOM button. There are 3 levels of zooming (2x, 3x and 4x) and they can be achieved one by one through subsequent key presses on the ZOOM key. NOTE: user can select the portion of the picture to be enlarged by using the Direction button ().

Page 18 of the Preference Audio DHM-0100 user manual — EXIT START NEXT  I
Page 18 · click to enlarge
Page 18

Program Mode This function is applicable for DVD and CD audio. User can assign the playback sequence according to his/her preference. For CD audio, users can assign the track sequence while for DVD discs, user can assign both the Title and Chapter sequence.

1. Press the PROGRAM button. The Program Sequence tabel will be shown on the screen.

PROGRAM

01 _ _ 06 _ _ 02 _ _ 07 _ _ 03 _ _ 08 _ _ 04 _ _ 09 _ _ 05 _ _ 10 _ _

EXIT START NEXT I

2. Enter the track number according to the user preference through the Number keys (0-9).

PROGRAM

01 0 5 06 _ _ 02 0 3 07 _ _ 03 0 8 08 _ _ 04 _ _ 09 _ _ 05 _ _ 10 _ _

EXIT START NEXT I

3. After assigning the playback sequence, move the highlight cursor to the START opiton by using the Navigation Arrows. Press ENTER on the remote control to confirm.

PROGRAM

01 0 5 06 _ _ 02 0 3 07 _ _ 03 0 8 08 _ _ 04 _ _ 09 _ _ 05 _ _ 10 _ _

EXIT START NEXT I

To remove the program: Move the highlight cursor to desired Program by using the Navigation arrows then press the CLEAR button to remove the selected program.

Page 19 of the Preference Audio DHM-0100 user manual — PROGRAM
Page 19 · click to enlarge
Page 19

MP3 OPERATION This unit can support ISO9660 file system CD-ROM navigation. Multi-Media files such as MP3 can be played in the DVD player.

  • Operation
  • Insert the MP3 disc into the tray. Navigation Menu will be displayed. The menu will show the files in the root directory, and the MP3 files then be play automatically.
  • In the MP3 menu shows a blue and an orange cursor. The blue cursor indicates the currently playing MP3 song, the orange cursor indicates a title to be selected.

MP3 SONG 001 MP3 SONG 002 MP3 SONG 003 MP3 SONG 004 MP3 SONG 005 MP3 SONG 006

  • You can select the other songs by the nevigation arrow buttons or directly input the song number by pressing the number keys. The orange cursor will move to the selected song. Then press ENTER button to confirm. Note :
  • There are three digits displayed. If you want call up a title with only one or two digits, you can either start the entry with “0” or “00”, or you can enter the number of the song and then wait a few seconds until the cursor skips to the selected title.
  • Press the REPEAT button to select : Random (playback in random order), Single (play one title, then stop), Repeat One (repeat the current title), Repeat Folder (repeat current folder).

Picture CD Digital pictures (JPEG format) from a digital camera can be burnt to a disc and played on this DVD Player. Insert a picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (Side Show Mode).

  • Operations: During Slide Show Mode:
  • Pressing the PAUSE button will freeze the screen, so that the current picture can be held for a long time. To resume the slide show mode, press PLAY button.
  • Pressing the NEXT button on the remote control will skip the next picture.
  • Pressing the PREVIOUS button on the remote control will repeat the current picture.

Blue cursor · Orange cursor

Page 20 of the Preference Audio DHM-0100 user manual — TROUBLE SHOOTING
Page 20 · click to enlarge
Page 20

TROUBLE SHOOTING

Check the following guide for the possible cause of a problem before contacting service.

  • The power cord is disconnected.
  • Plug the power cord into the wall

outlet and unit securely. • Insert a disc. (Check that the DVD or au-

The power is on, but DVD player does not work

  • No disc is inserted.

dio CD indicator in the DVD display is lit.) • Select the appropriate video input mode

  • The TV is not set to receive DVD signal output.

on the TV so the picture from the DVD

  • player appears on the TV screen.
  • Connect the video cable into the jacks securely.
  • Turn on the TV.
  • Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player.
  • Connect the audio cable into the jacks securely.
  • Turn on the equipment connected with the audio cable.
  • Set the Digital audio Output to the correct position, then turn on the DVD player
  • The video cable is not connected securely.
  • The connected TV power is turned off.
  • The equipment connected with the audio cable is not set to receive DVD signal output.
  • The audio cable is not connected securely.
  • The power of the equipment connected

with the audio cable is turned off. • The Digital Audio Output is set to the wrong position.

  • again by pressing the POWER button.
  • Clean the disc.
  • Insert a disc
  • Insert a playable disc. (Check the disc

The playback picture is poor The DVD player does not start playbac

  • The disc is dirty.
  • No disc is inserted.
  • An unplayable disc is inserted.
  • type, color system and Regional code.)
  • Place the disc with the playback side down.
  • Place the disc on the disc tray correctly inside the guide.
  • Clean the disc.
  • Press the SET UP button to turn off the menu screen.
  • Point the remote control at the remote sensor of the DVD player.
  • Operate the remote control within about 23ft (7m).
  • Remove the obstacle.
  • The disc is placed upside down.
  • The disc is not placed with the guide.
  • The disc is dirty.
  • A menu is on the TV screen.

The Remote Control does not work properly

  • The remote control is not pointed at the remote sensor of the DVD player.
  • The remote control is too far from the DVD player.
  • There is an obstacle in the path of the

remote control and the DVD player. • The batteries in the remote con- trol are exhausted.

  • Replace the batteries with new ones.
Show 5 more labels / short text on this page
Cause · Correction · Symptom No Power · No Picture · No Sound
Page 21 of the Preference Audio DHM-0100 user manual — VIDEO
Page 21 · click to enlarge
Page 21

SPECIFICATION

GENERAL

Power source AC 120V~ 60Hz Power consumption 10W Mass 2 Kg External dimensions (WxHxD) 263 x 225 x 55 mm Operating conditions Temperature: 5°C to 35°C Operation status Horizontal Operating humidity 5% to 90%

CD/DVD

Laser Semiconductor laser, wavelength 650nm Signal system NTSC Frequency response (audio) 4Hz to 20 KHz Signal to noise ratio (audio) More than 90dB (1KHz, NOP, 20KHz LPF/A-Filter) Dynamic range (audio) More than 95dB Harmonic distortion (audio) 0.2% (1KHz)

VIDEO

Video output 1.0V (p-p), 75 ohm, negative sync., RCA jack S-Video output (Y) 1.0V (p-p), negative sync., Mini DIN 4-pin x 1 (C) 0.3V (p-p), 75 ohm Component video (Y, Pb/Cb, Pr/Cr) (Y) 0.7V (p-p), negative sync. RCA jack (Pb/Cb) 0.7V (p-p), 75 ohm (Pr/Cr) 0.7V (p-p), 75 ohm

* Design and specification are subject to change without notice.

Page 22 of the Preference Audio DHM-0100 user manual — SPECIFICATION
Page 22 · click to enlarge
Page 22

For service, support and warranty information, visit www.polaroidelectronics.com or in the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800- 400-2443.

“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for use on the DHM-0100 to Petters Consumer Brands, LLC.

Fix-it

Troubleshooting

Common problems, likely causes, and what to do.

ProblemPossible causeRemedy
No Power• The power cord is disconnected.• Plug the power cord into the wall outlet and unit securely. p.20
The power is on, but DVD player does not work• No disc is inserted.• Insert a disc. (Check that the DVD or au- dio CD indicator in the DVD display is lit.) p.20
No Picture• The TV is not set to receive DVD signal output.• Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. p.20
No Picture• The video cable is not connected securely.• Connect the video cable into the jacks securely. p.20
No Picture• The connected TV power is turned off.• Turn on the TV. p.20
No Sound• The equipment connected with the audio cable is not set to receive DVD signal output.• Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. p.20
No Sound• The audio cable is not connected securely.• Connect the audio cable into the jacks securely. p.20
No Sound• The power of the equipment connected with the audio cable is turned off.• Turn on the equipment connected with the audio cable. p.20
No Sound• The Digital Audio Output is set to the wrong position.• Set the Digital audio Output to the correct position, then turn on the DVD player again by pressing the POWER button. p.20
The playback picture is poor• The disc is dirty.• Clean the disc. p.20
The DVD player does not start playbac• No disc is inserted.• Insert a disc p.20
The DVD player does not start playbac• An unplayable disc is inserted.• Insert a playable disc. (Check the disc type, color system and Regional code.) p.20
The DVD player does not start playbac• The disc is placed upside down.• Place the disc with the playback side down. p.20
The DVD player does not start playbac• The disc is not placed with the guide.• Place the disc on the disc tray cor- rectly inside the guide. p.20
The DVD player does not start playbac• The disc is dirty.• Clean the disc. p.20
The DVD player does not start playbac• A menu is on the TV screen.• Press the SET UP button to turn off the menu screen. p.20
The Remote Control does not work properly• The remote control is not pointed at the remote sensor of the DVD player.• Point the remote control at the remote sensor of the DVD player. p.20
The Remote Control does not work properly• The remote control is too far from the DVD player.• Operate the remote control within about 23ft (7m). p.20
The Remote Control does not work properly• There is an obstacle in the path of the remote control and the DVD player.• Remove the obstacle. p.20
The Remote Control does not work properly• The batteries in the remote con- trol are exhausted.• Replace the batteries with new ones. p.20

Ask about the Preference Audio DHM-0100

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Preference Audio DHM-0100

Be the first to ask — other owners or our team will answer.

Original document

Preference Audio DHM-0100 manual PDF

22 pages·758 KB·DVD Player·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…