Instruction/ maintenance manual of the product TH109 Aube Technologies
Go to page of 2
TH109 400-109-000-E 1/29/07 1/2 This thermostat can be used to control an electric heating system such as a baseboard heater , a radiant ceiling, a radian t floor , a con- vector , etc. The thermostat cannot be used with the followi ng: • a resistive load under 2 A • a resistive load over 12.
TH109 400-109-000-E 1/29/07 2/2 The thermostat normally displays the actual (ambi- ent) temperature. • T o view the setpoint temperature, press once on either te mperature adjust ment button.
An important point after buying a device Aube Technologies TH109 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aube Technologies TH109 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aube Technologies TH109 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aube Technologies TH109 you will learn all the available features of the product, as well as information on its operation. The information that you get Aube Technologies TH109 will certainly help you make a decision on the purchase.
If you already are a holder of Aube Technologies TH109, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aube Technologies TH109.
However, one of the most important roles played by the user manual is to help in solving problems with Aube Technologies TH109. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aube Technologies TH109 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
