Instruction/ maintenance manual of the product TP-5800 POSIFLEX Business Machines
Go to page of 28
WORK STATION Rev. : Original Jiva SL & Jiva EL (TP - 5700/5800) SERIES USER’S MANUAL SL EL.
P/N: 16280900010 SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radi o communications.
i TABLE OF CONTENTS BRIEF INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE USER’S MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE PRODUCT . . . . . . . . . . . . . . . . . . .
ii WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 LOCATION FOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 OPERATING SYSTEM RECOVERY . . . . . . . . . . . . . . . . . . . . . 3 - 7 USING THE TOUCH POS .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 1 BRIEF INTRODUCTION THE USER ’ S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch interface workstation .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 2 STANDARD FEATURES a) CPU: Celeron compatible 400 MHz up b) HDD: available for fat client models c) Support Win98, Win2000 in fat client models.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 3 12. one CR port for control over 2 cash drawers max. 13. audio ports (1 Microphone input and 1 audio line output) n) Touch control functions :.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 1 - 4.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 1 PARTS IDENTIFICATION FRONT VIEW The se curity device and top mount LCD customer display are options to both 12” and 15” models. The LED in the logo area serves for several purposes through giving different indication of steady/flashing green/blue light.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 2 SIDE VIEWS Right Side View Left Side View Lock/Release Lever Push In This Direction To Adjust The Tilt Angle Of The Display Panel Latch Hole F.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 3 REAR VIEW REAR VIEW OF MAIN UNIT Lock/Release Button To Detach The Main Unit Optional Security Devices Lock/ Release Lever Cable Exit Service .
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 4 ADJUSTABLE STAND ASSEMBLY BOTTOM OF STAND ASSEMBLY Base Matching Holes Stand Lock/Release Lever Lock/Release Button For Main Unit Cable Exit C.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 5 CONNECTORS Locations of I/O Ports in original revision: Pull The Cable Cover Out In This Direction Turn Counterclockwise Then Take Out The Lat.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 2 - 6.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 1 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 2 Adjustable Stand Lock/Release Lever 2 Sets of 4 Matching Holes PREPARING STAND ASSEMBLY Take the adjustable stand assembly and turn it up side down to show the bottom of the base.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 3 INSTALLING UPS BATTERY Place the optional UPS battery in the battery compartment (shown top left). Screw on the battery cover and route the battery cable through the base. Please enable the UPS features in the software settings before use.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 4 This battery socket acc epts a 3 V button cell Lithium battery (CR2032) required to support the system real time clock. The jumpers in this window are designated for COM port power supply function.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 5 OPENING CABLE COVER Insert the tip of the latchkey into a latch hole on one side near bottom of t he main unit. Turn this key counterclockwise to the end. Do the same on the opposite side. Be sure to take the key out of the hole.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 6 both sides to secure the cable cover on the main unit. Adjust the tilt ang le of the main unit for best viewing effect in the application. CAUTION: On doing any insertion or extraction of any connector, please always hold the connector head itself instead of pulling on the cable wire.
Jiva SL & Jiva EL (TP5700/ 5800) USER’S MANUAL 3 - 7 consideration. If the main unit is tilted to near vertical position, the total height can be either 360 mm or 380 mm depending on the position adjusted. When the main unit is tilted to near horizontal position, the total height requ ired is 275 mm.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 8.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 1 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very important that you check the follo wing operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 2 There is an LED in the logo area or under the printed logo for system revision that serves for several purposes.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 3 Switch Manager” in “Posiflex Tools” in the Program Files helps managing these functions. Software Support The Jiva series provides a software power off command for application program maneuvers.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 4 through pin 9 after proper jumper setting change. All 4 ports are standard RS232 serial ports. When a serial Modem is to be used in Jiva SL & Jiva EL series, it is most recommended to use COM2 or COM3 port for th is purpose.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 5 controller, touching any point on the screen surface after touching the right - click sticky button results as a click on the right button of the mouse at that point. However, the right button function is applicable only under the WIN 98 environmen t.
Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 4 - 6 If, for any reason, the user wants to remove the driver for the RS232 touch controller, please select “Monitor Mouse for Windows 95” in the program list for removal.
An important point after buying a device POSIFLEX Business Machines TP-5800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines TP-5800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines TP-5800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines TP-5800 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines TP-5800 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines TP-5800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines TP-5800.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines TP-5800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines TP-5800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
