Instruction/ maintenance manual of the product TM-7112 POSIFLEX Business Machines
Go to page of 20
Part 1 I. FEATURES • Most stable 12.1” LCD monitor with tilt adjust for industrial and commercial use • Application covers POS, POI (Kiosk), Factory Automation etc.
Part 2 II. MODEL NUMBERS LM - 7112: 12.1” LCD Monitor on adjustable stand TM - 7112: 12.1” LCD Touch Monitor on adjustable stand III. MAJOR OPTIONS 1. Color choice between Charcoal and Ivory 2. Side mount device BC - 300 (bar code card reader) or SD - 300 (MSR and/or optical fingerprint reader) 3.
Part 3 B. RIGHT SIDE VIEW C. REAR VIEW D. POWER LED INDICATION • Yellow: standby • Blue: operating (Downlink) USB Ports Option unit mounting screws Tilt adjust release button RS232 Port VG A Port .
Part 4 VI. HARDWARE INSTALLATION A. Side Mount Upgrade Kit When a side - mount upgrade kit option SD - 300 or BC - 300 is ordered with the LM/TM - 7112, this option is already installed in the delivery.
Part 5 VII. DRIVER INSTALLATION A. INSTALLATION 1. RS232 touch Please find in the attached Posiflex product information CDROM under subdirectory Drivers TM_LM RS232 for RS232 interface touch controller driver.
Part 6 Ÿ Click on touch – This selection of touch button disables the double click function of a touch and a left click will be registered at the point where a touch on the scree n is made even if the touch is dragged to other spot before release.
Part 7 determines the frequency and duration of the internal buzzer beep as response to tou ch on touch panel. Ÿ Touch Point Dots – This list button selects the size of touch point on touch panel. A too small touch size makes the mouse cursor jumpy or even bouncing.
Part 8 of mouse at that point. However, the next touch will resume the left button of mouse unless the small window is touched again..
Part 9 VIII. APPLICATION A. TILT ANGLE ADJUST Press down the tilt adjust release button as arrowed in the right pi cture and adjust the LCD panel tilt angle between 42.5° and 77.5° for best viewing effect in application and then release the button. The screen will be firmly held for operation.
Part 10 “OSD” button : To enter OSD setup menu, or to perform the function selected in OSD operation. “NEXT” button : To select next item of option functions. “ ” “ ” button : To increase setting. “ ” “ ” button : To decrease setting.
Part 11 to save the current setting and return to “Brightness/Contrast submenu”. “CONTRAST ADJUST”: When this item is selected, there will be only the contrast icon with an adjustment indicat ion bar under it between the main menu area and the video signal mode.
Part 12 “5000K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 5000 degrees Kelvin. “6500K”: Pressing “OSD” button on this icon will set the color balance to a color temperature of 6500 degre es Kelvin.
Part 13 under it between the main menu area and the video signal mode. Press “+” button to shift up the screen display. Press “ - ” to shift down. Press “OSD” button to save the current setting and return to “Geometry adjust submenu”. “EXIT”: Return to “Main menu”.
Part 14 have no effect at all if the display mode is not one of the confusing modes. The confusing modes here mean 640 x 400 or 720 x 400 in display resolution as both mode have refresh rat e of 70Hz, horizontal frequency of 37.9KHz and pixel frequency of 31.
Part 15 IX. S UPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolu tion Refresh Rate (Hz) Horizontal Frequency (KHz) 640*400 70 37.
Part 16.
Part 17.
Part 18.
Part 19.
Part 20 警告使用者 這是甲類的資訊產品，在居住的環 境中使用時，可能會造成射頻干 擾，在這種情況下，使用者會被要 求採取某些適當的對策。 T31454.
An important point after buying a device POSIFLEX Business Machines TM-7112 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines TM-7112 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines TM-7112 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines TM-7112 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines TM-7112 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines TM-7112, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines TM-7112.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines TM-7112. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines TM-7112 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
