Instruction/ maintenance manual of the product LM-6200 POSIFLEX Business Machines
Go to page of 10
Part 1 I. FEATURES • Light weight and high luminance LCD monitor for industrial and commercial use • Application covers POS, POIS (Kiosk), f actory Automation etc.
Part 2 II. MODEL NUMBERS LM - 62 12: 12.1” LCD Monitor w/ stand LM - 62 01: 12.1” LCD Monitor w/ j oining mechanism for Posiflex touch terminals such as TP or KS series III. CARTON CONTENTS 1. LCD Monitor panel unit 2. Monitor stand (for LM - 6 2 12) or joining mechanism (for LM - 62 01) 3.
Part 3 be supplied through the interface cable from the main unit and just connect the video interface cable. Connect the other end of VGA cable to the appropriate VGA port.
Part 4 B. OSD functions Press “OSD” button with a normal display on the screen to activate the OSD functions (On Screen Display adjustment). The OSD window will pop up on the screen. On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right.
Part 5 make the choice. “ACCEPT”: Accept the adjustment setting. “REJECT”: Decline the adjustment setting and return to previous sett ing. “AUTO RGB RESET”: Upon an “OSD” button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at center of the screen.
Part 6 on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Press “OSD” button to make the choice. “ACCEPT”: Accept the adjustment setting.
Part 7 it between the main menu area and the video signal mode. Press “+” or “ - ” button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds. Default is 30 seconds. Press “OSD” button to save the current setting and return to “OSD submenu”.
Part 8 VI. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “O ut Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolution Refresh Rate (Hz) Horizontal Frequency (KHz) 640*400 70 37.
Part 9.
Part 10 警告使用者 這是甲類的資訊產品，在居住的環 境中使用時，可能會造成射頻干 擾，在這種情況下，使用者會被要 求採取某些適當的對策。 T31454.
An important point after buying a device POSIFLEX Business Machines LM-6200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines LM-6200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines LM-6200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines LM-6200 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines LM-6200 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines LM-6200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines LM-6200.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines LM-6200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines LM-6200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
