Instruction/ maintenance manual of the product CR410X POSIFLEX Business Machines
Go to page of 8
1 Rev. : C NOTICE The manufacturer of the POS cash drawer makes no representation or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a part icular purpose or for any indirect, special or consequential damages.
2 MODEL NUMBERS Model CR400X CR410X CR421X Bill Compartment 5 Adjustable 5 Fixed 5 Fixed Bill clip Plastic Metal Metal Coin compartment 9 Fixed 9 Fixed 5 Fixed Coin Roll storage 1Underneath Cash Tray 4 Behind Cash Tray INFERFACE APPLICATION Model Number Interface Security Code Power / Source CR - 4000/4100/4210 Printer drive N.
3 b). For CR4001/ 4101/ 4211/ 4002/ 4102/ 4212: CCBLA - 196A with one 9PM and one 9PF connector. c). For CR4003/ 4103/ 4213: CCBLA - 089 - 1 with one 25PM and one 25P F connector. d). For CR4004/ 4104/ 4214: The serial signal cable is already built on.
4 3). Set S1 for security code to open cash drawer. In normal practic e, the security code is suggested to be a non - displayable ASCII character. For. example, a hexadecimal number between 01 to 1F. Please refer to rear panel illustration below. CR4001/ 4101/ 4211/ 4002/ 4102/ 4212/ 4003/ 4103/ 4213 Rear panel illustration.
5 CR 4005/ 4105/ 4215/ CR4005 - II/ 4105 - II/ 4215 - II 1). Define a drawer number for the cash drawer so that this cash drawer is going to respond accordingly in USB communication. Follow the table below for SWITCH SETTING to adjust the switch S1 according to this drawer number if it is not 7.
6 UPOS driver application (Applied for all Posiflex cash drawer) Please first find in Posiflex Product Information CDR OM or download from Posiflex web sites for UPOS driver setup. In this application CR4XX3 and CR4XX4 respond to openDrawer command only; CR4XX0, CR4XX1 and CR4XX2 are compliant to UPOS version 1.
7 2. Start up the test program and c lick “STATUS” button. The drawer status of Open/Close or Not present will be displayed under each drawer number as “O”, “C” or “N” 3.
8 Security Code CR - 4002/ 4102/ 4212/ 4003/ 4103/ 4213 1 - 255; factory preset value = 7 CR - 4005/ 4105/ 4215/ 4005 - II/ 4105 - II/ 4215 -II USB PID Drawer Open Sense CR - 4000/ 4100/ 4210 Drawer o.
An important point after buying a device POSIFLEX Business Machines CR410X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines CR410X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines CR410X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines CR410X you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines CR410X will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines CR410X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines CR410X.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines CR410X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines CR410X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
