Instruction/ maintenance manual of the product PN650 Porter-Cable
Go to page of 13
Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No.
2 Date of Manufacture: ___________________________ Fecha de fabricación:, Date de fabrication: Serial No: ______________________________________ Número de serie:, Nombre d'ordre.
3 GENERAL SAFETY RULES DANGER: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury, including the following: READ AND FOLLOW ALL INSTRUCTIONS. There are certain applications for which this tool was designed.
4 9. Use clean, dry, regulated, compressed air at 50 to 120 PSI, (3.4 to 8.3 BAR). Fig. 6. 10. Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected.
5 EMPLOYER’S RESPONSIBILITIES DANGER: Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. Keep this manual available for use by all people assigned to use this tool. For personal safety and proper operation of this tool, read and understand tool labels and manual.
6 DANGER: All air line components (hoses, connectors, filters, regulators, etc.) must have a minimum working pressure rating of at least 150 PSI (10.3 BAR) or 150% of maximum system potential, whichever is greater . Do not connect tool to pressure which potentially exceeds 200 PSI (13.
7 FINISH NAIL GUIDE ASSEMBL Y 1. WARNING: Disconnect tool from air supply. 2. The finish nail guide (A) Fig. 17, for driving 1- 1 / 4 "(3d) to 2- 1 / 2 "(8d) finish nails, is provided with a rubber nose cushion (B) Fig. 17 that will reduce marring of the work surface.
8 HAMMER ASSEMBL Y 1. WARNING: Disconnect tool from air supply. 2. To install hammer attachments (A through D) Fig. 21 lay tool on its cap with nail guide pointing upward. Loosen and remove the magnetic nail guide and bushing (Fig. 15) using the 24mm open end wrench supplied.
9 8. Align flats on hammer base with the slots in the hammer head guide bushing until the 30mm open end wrench will engage the flats (A) Fig. 27. 9. Engage the other 30mm open end wrench with the flats on hammer head as shown (B) Fig. 27 and tighten as securely as possible.
10 1. Attach appropriate nail guide or hammer attachment. 2 . Orient nail (A) Fig. 29 with point down and and insert into the nail guide (B). 3. Position point of nail (A) Fig. 30 in the desired location and push down on the tool. The tool will began cycling and driving the fastener.
11 CABLE/DELTA FACTORY SERVICE CENTER. All repairs made by these agencies are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by anyone other than these agencies. Should you have any questions about your tool, feel free to write us at any time.
PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase.
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE .
An important point after buying a device Porter-Cable PN650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable PN650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable PN650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable PN650 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable PN650 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable PN650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable PN650.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable PN650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable PN650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
