Instruction/ maintenance manual of the product DVP-0600 Polaroid
Go to page of 26
- 1 - DVD Player DVP 0600 Operation Manual.
- 2 - Content s Important Safety I nstructions ------------- ------------ ----------- ------------ ------------- -------- Features ---- ------------- ---------- ------------- ------------- ---------- .
- 3 - I m p o r t a n t S a f e t y I n s t r u c t i o n s NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this app aratus near water . 6) Clean only with d ry cloth. 7) Do not block any ventilation openings.
- 4 - F e a t u r e s DUAL COMP A TIBILITY Supports both “Progressive scan” and “Interlaced” televisions. Progressive Scan creates a picture signal with double the scan lines of a conventional DVD, resulting in higher picture resolution and sharper image quality .
- 5 - About Discs Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: DISC LOGO DIAMETER PLA YB ACK TIME/ PLA Y ABLE SIDES 133 minSS-SL 242 minSS.
- 6 - C a r e o f D i s c s How to hold dis cs When loading or removing discs, try not to touch their playing surfaces. Cleaning Fingerprints or other dirt on the disc may affect sound and picture quality . T o clean your discs, use a soft clean cloth to wipe them.
- 7 - E l e m e n t s o f O p e r a t i o n – F r o n t P a n e l 1. St andby-on button -Press to turn off the power . 2. Remote sen sor -Receiving remote control signal for operation. 3. Displa y p anel -Indicates the current status of the unit. 4.
- 8 - Rear Panel 1. 5.1CH Audio output ja cks 2. 2CH A udio output jacks 3. Coaxial digital audio output jack 4. Optical digi tal audio output jack 5. S-video output jack 6. Video output jack 7. Component (Y/Y , Pb/Cb, Pr/Cr) output jacks 8. Sw itch between progressive a nd interlace scan 9.
- 9 - Remote Control Handset Button Functions 1. Power -Press to turn the DVD player on or off. 2. A ngle -Press to access various camera angles (if the DVD contains multiple camera angles). 3. A udio -Press to access various audio languages (if the DVD contains multiple audio languages).
- 10 - Remote Control Handset Button Functions 9. Pause/Step -Press to pause playback or step frame by fr ame. -Press PLA Y button to resume normal playback.
- 11 - U s a g e o f t h e R e m o t e C o n t r o l Battery Installation Insert the batteries supplied while observing the correct (+) and ( ) polarities. Service life of Batteries ● The batteries operation period normally last for about six months, although this depends on how often, or for what operations, the remote control is used.
- 12 - C o n n e c t i o n s Do not connect the power cord until all other connections have been made. Audio Connection: There are stereo audi o out put and coaxial digital audio o utput ; Video Connection: there are video output and S-video output.
- 13 - C o n n e c t i o n s 3. Y Cb Cr video connection If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks with three Y/Cb/Cr cables: 1) Press the SETUP button to access the setup menu. 2) Press the up/down direction buttons to select “VIDEO OUTPUT” in “PREFERENCES”.
- 14 - C o n n e c t i o n s Connecting to a n Analog Amplifier.
- 15 - C o n n e c t i o n s Connecting to an Amplifier with 5.1 CH Audio Output Audio Connecti on: T o experience the best possible s ound from yo ur DVD player , you should use the 5.1 channel audio connections. T o do this , connect the 5.1 CH AUDIO OUT jacks on the DVD play er to the corre sponding AUDIO IN on your amplifier .
- 16 - C o n n e c t i o n s Connecting to an A mplifier with Dolb y Digit al Decoder If the amplifier has Dolby Digital decoding function, set the output format of digital audio signal in setup menu to “SPDIF/RAW”.
- 17 - D i s c P l a y O p e r a t i o n s Prep aration After connection, turn on the power of relevant equipment and select video input. 1. T urn on the player’s power Press the E JECT bu tton o n front panel to turn on the power an d the player will search for the disc automatically .
- 18 - D i s c P l a y O p e r a t i o n s Subtitle The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle disc, press the SUBTITLE button on remote control to select different subtitle. Angle The DVD player supports multi-angle functi on.
- 19 - D i s c P l a y O p e r a t i o n s JPEG Playback JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make”P ICTURE CD”, namely JPEG format.
- 20 - Playback Functions Stop During playback, press the STOP button on remote control to stop playback. For DVD discs, after pressing the ST OP button once, if y ou press the PLA Y button, then the player will play from the stopped point.
- 21 - Playback Functions Program Playback Use the PROGRAM button to activate program playback of CD discs. Operation steps: 1. Press the ST OP button on remote control to stop playback. 2. Press the PROGRAM button to enter program status. 3. The player display may show “PROGR AM P00:00”.
- 22 - S y s t e m S e t u p SETUP MENU Press the SETUP button on the remote control to display a main menu: GENERAL SETUP , SPEAKER SETUP , AUDIO SETUP and PREFERENCES.
- 23 - S y s t e m S e t u p SPEAKER SETUP 1. DOWNMIX (L T/RT , STERE O and 5.1CH) Selecting “L T/RT” in the “DOWNMIX” will alter the audio output into a mixed Dol by output. By selecting “STEREO” in the “DOWNMIX”, the play er will output a normal stereo signal.
- 24 - S y s t e m S e t u p PREFERENCES Y ou can set pref erences for the following features: 1. TV TYPE (MUL TI.SYSTEM, NTSC & P AL) Y ou can select relevant s ystem depending on your connected TV type. It is originally set in NTSC. 2. VIDEO OUTPUT (S -VIDEO, YPBPR/YCBCR & RGB) Y ou can choose the approp riate video output.
- 25 - T roubleshooting Symptom Check Item to See If: The player c annot play . -disc tray is closed. -disc is loaded. -disc is di rty or warped. If i t is, clean it or press it. -the player’s regi on code is the same as region code of DVD disc. -water conde nsation has occu rred.
- 26 - S p e c i f i c a t i o n s Laser W avelength W avelength: 780/650nm Video System P AL/MUL TI/NTSC Frequency Response 20Hz20kHz ±2.5dB Audio Signal-to-noise Rate ≥ 85dB Audio distortion + noise ≤ -70dB 1kHz Channel Separation ≥ 70dB 1kHz Dynamic Range ≥ 80dB 1kHz Analog Audio Out Out Level: 2V± 0.
An important point after buying a device Polaroid DVP-0600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polaroid DVP-0600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polaroid DVP-0600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polaroid DVP-0600 you will learn all the available features of the product, as well as information on its operation. The information that you get Polaroid DVP-0600 will certainly help you make a decision on the purchase.
If you already are a holder of Polaroid DVP-0600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polaroid DVP-0600.
However, one of the most important roles played by the user manual is to help in solving problems with Polaroid DVP-0600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polaroid DVP-0600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
