Instruction/ maintenance manual of the product EV-401M Planet Technology
Go to page of 23
Ethernet Over VDSL Converter EV-401M / EV-401S User’s Manual.
PLANET Ethernet over VDSL series 2 Trademarks Copyright PLANET Technology Corp. 2001. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
EV-401M / EV-401S User's Manual 3 TABLE OF CONTENTS 1. INTRODUCTION ........................................................................ 5 1.1 C HECKLIST ................................................................................ 5 1.2 I NTRODUCTION T O E THERNET OVER VDSL C ONVERTER .
PLANET Ethernet over VDSL series 4 This page intentionally left blank!.
EV-401M / EV-401S User's Manual 5 1. INTRODUCTION 1.1 Checklist Check the contents of your package for following parts: Ethernet over VDSL Converter User's manual Power cord .
PLANET Ethernet over VDSL series 6 1.2 Introduction To Ethernet over VDSL Converter General Description The converter is a switching architecture with four RJ45 10/100Mbps Fast Ethernet switching ports and one 10Mbps RJ11 symmetric Ethernet over VDSL port (symmetry means 10Mbps upstream and 10Mbps downstream data rate).
EV-401M / EV-401S User's Manual 7 central side. If you want to se tup one pair of converters for point-to-point connection then one set must be client mode and the other one is master mode.
PLANET Ethernet over VDSL series 8 1.3 Key Features The converter provides the following key features: Complies with IEEE802.3 10BASE-T standard Complies with IEEE802.3u 100BASE-TX standard Supports Ethernet over VDSL Two RJ11 connectors for Et hernet over VDSL port, one for LAN connection and one for voice connection.
EV-401M / EV-401S User's Manual 9 1.4 Specifications Protocols and Standards IEEE 802.3 (Ethernet)IEEE 802.3u (Fast Ethernet) IEEE 802.3x (flow control)Ethernet over VDSL Maximum Speed Full Duplex: 200Mbps (for 100Base-TX), 20Mbps (for 10Base-T) Half Duplex: 100Mbps (for 100Base-TX), 10Mbps (for 10Base-T) Cabling 10Base-T - 2-pair UTP Cat.
PLANET Ethernet over VDSL series 10 This page intentionally left blank!.
EV-401M / EV-401S User's Manual 11 2. HARDWARE DESCRIPTION This product series provide 2 RJ-11 ports for voice connection (like telephone) and for network line connection.
PLANET Ethernet over VDSL series 12 LED indicators SYSTEM LED Steady Green This indicator lights green when the converter is receiving power. PWR Off Not receiving power VDSL LED Steady Green If both .
EV-401M / EV-401S User's Manual 13 Blinking Amber A collision occurs when tw o stations within a collision domain attempt to transmit data at the same time. Intermittent flashing amber of the collision LED is normal; the contending adapters resolve each collision by means of a wait-then-retransmit algorithm.
PLANET Ethernet over VDSL series 14 Pow er Notice: 1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time, please consider using UPS (Uninterrupted Power Supply) for your devic e.
EV-401M / EV-401S User's Manual 15 3. INSTALLING AND USING ETHERNET OVER VDSL CONVERTER 3.1 Install the Ethernet Over VDSL Converter The Converter does not require any software configuration. Users can imm ediately use any feature of this product simply by attached the cables and plug power on.
PLANET Ethernet over VDSL series 16 Therefore, most of the traffic will be limited on the local phone line network instead of flooding to the Internet. Another application for the converter is used for LAN to LAN extension through the normal telephone line.
EV-401M / EV-401S User's Manual 17 W ater or moisture can not enter the unit Air flow around the unit and through the vents in the side of the case is not restricted (company recommend th.
PLANET Ethernet over VDSL series 18 This page intentionally left blank!.
EV-401M / EV-401S User's Manual 19 4. SWITCH OPERATION 4.1 MAC Address Table and Learning The converter built in with a MAC address table that is composed of many entries. Each entry is used to store the address information of network nodes on the network, including MAC address, port ID, etc.
PLANET Ethernet over VDSL series 20 This page intentionally left blank!.
EV-401M / EV-401S User's Manual 21 5. TROUBLE SHOOTING SYMPTOM: VDSL link LED not lit after wire is connected to the VDSL port. CHECKPOINT: 1: Verify the length of the wire connected between EV-401M and EV-401S is not more than 1.5km. 2: Please note you must use 1 EV-401M and 1 EV-401S connect to each other to make it work.
.
EM-EV401V1 ISO9002.
An important point after buying a device Planet Technology EV-401M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planet Technology EV-401M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planet Technology EV-401M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planet Technology EV-401M you will learn all the available features of the product, as well as information on its operation. The information that you get Planet Technology EV-401M will certainly help you make a decision on the purchase.
If you already are a holder of Planet Technology EV-401M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planet Technology EV-401M.
However, one of the most important roles played by the user manual is to help in solving problems with Planet Technology EV-401M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planet Technology EV-401M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
