Instruction/ maintenance manual of the product HSK012HD Husky
Go to page of 12
HSK012HD MAN ENGL 090105 9/1/05 5:42 PM Page i.
USER’S MANUAL & W ARRANTY INFORMA TION TO REDUCE THE RISK OF INJURY , USER MUST READ AND UNDERST AND THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING THE OPERA TION AND W ARRANTY OF THIS PRODUCT . PLEASE RET AIN FOR FUTURE REFERENCE.
1 SAFETY INFORMA TION W ARNINGS: 1. When working with lead-acid batteries, always make sure immediate assistance is available in case of accident or emergency .
2 3. Never insert anything other than the supplied power/recharging cords or recommended appliance power/recharging cords into the 12 volt DC charging/ power socket on this unit. Do not use any accessor y that is not recommended or provided by the manufacturer .
INTRODUCTION Congratulations on selecting the Husky ® ST ART -IT ELITE ® Jump-Star t System. This com- pact jump-starter is unique in the amount of energy it can supply for its size. The inter- nal batter y is a high-density sealed, lead-acid batter y that stores and delivers ener- gy comparable to full sized ordinar y jump-starters.
4 FIGURE 1A (Front Panel View) FIGURE 1B (Rear View) 1. 12 V olt DC Accessor y Socket for DC appliances (with overload protection) 2. Batter y Level Status Pushbutton 3. LED Charging/Batter y Level Indicators 4. ON/OFF Power Switch 5. Recharging Port 6.
5 JUMP ST ARTING INSTRUCTIONS NOTE: CAUTION: W ARNINGS: 1. Before using this system to jump-start any vehicle or boat, read and understand all instructions, safety tips, warnings, cautions and first aid information provid- ed in this manual and on the product labeling.
6 RECOMMENDA TIONS FOR OPTIMUM PERFORMANCE OF THE HUSKY ST ART -IT ELITE JUMP-ST ART SYSTEM CAUTION: 1. T o avoid possible damage that may shorten the unit’ s working life, protect this unit from direct sunlight, direct heat and moisture.
7 W ARNING: FIRST AID: S KIN: If batter y acid comes in contact with skin, rinse immediately with running water , then wash thoroughly with soap and water .
12 V OL T DC C HARGING 1. I nser t the plug that is marked “TO VEHICLE ACCESSORY OUTLET” of the DC/DC charging adapter into the 12 volt DC accessor y re ce pt ac le on t he vehicle or boat. 2. Inser t the plug at the other end of this charging adapter marked “TO JUMP ST ARTER OUTLET” into recharging port on the front panel of the unit.
9 Batter y Disposal: This unit contains a maintenance-free, non-spillable, sealed lead- acid batter y . This batter y is fully recyclable and should be accept- ed at any location that accepts common automotive starter batter- ies.
HSK012HD MAN ENGL 090105 9/1/05 5:42 PM Page 10.
An important point after buying a device Husky HSK012HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Husky HSK012HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Husky HSK012HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Husky HSK012HD you will learn all the available features of the product, as well as information on its operation. The information that you get Husky HSK012HD will certainly help you make a decision on the purchase.
If you already are a holder of Husky HSK012HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Husky HSK012HD.
However, one of the most important roles played by the user manual is to help in solving problems with Husky HSK012HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Husky HSK012HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
