Instruction/ maintenance manual of the product SD2320W Planar
Go to page of 20
SD2320W Stereoscopic Monitor USER’S GUIDE www.planar.com.
SD2320W | ii | User's Guide Usage Notice To prevent the risk of fire or shock hazards, do not exp ose this product to rain or moisture. Do not open or disassemble the product, as this may cause electric shock.
SD2320W | iii | User's Guide Box Contents The SD2320W shipping box contains the following com ponents: Bottom monito r assembly wit h mirror support ar ms and mirr or adjustment sc rews Bottom ca.
SD2320W | iv | User's Guide Two Composite Video cables (6-ft and 12-ft) Two S -Vid eo cab les (6 -ft a nd 12- ft) Mirror-flip PCI card Short DVI cables (14-in) Product user’s guide USB cord Pla.
SD2320W | v | User's Guide Contents Usage Notice .......................................................................................... ii Do ....................................................................................................
SD2320W | 1 | User's Guide Stereoscopic Viewing We live in a three-dimensional world. The human visual system can process the slightly different views of the wo rld and translate the views into the perception of depth. This pr ocess is called stereopsis.
SD2320W | 2 | User's Guide StereoMirror™ Technology A StereoMirror ™ monitor consists of two A MLCD (Active Matrix Liquid Crystal Display) units, oriented at a 110º an gle and mounted on a specially designed stand.
SD2320W | 3 | User's Guide A block diagram describing the process of driving a StereoMirro r ™ monitor with a computer is shown in the illustra tion below.
SD2320W | 4 | User's Guide Getting Started Read all instructions before assembling the monitor. Improper assem bly can result in damage to the display components. Assemble the unit 1. Remove the bottom monitor assembly from the shipping box and place it on a sturdy table or desktop.
SD2320W | 5 | User's Guide 4. Thread the cables from the top monitor through the rectangular hole in the cross bracket. 5. Replace the top and bottom cable covers, if desired.
SD2320W | 6 | User's Guide Select a graphics card The SD2320W unit requires a dual-output graphics card to drive the two monitors with a DVI signal. For profe ssional applications that use OpenGL quad-buffered stereo, the gr aphics card should support OpenGL stereo as well.
SD2320W | 7 | User's Guide Connect the cables The SD2320W unit comes with one 6-foot D VI cable, one 12-foot DVI cable, and one 14-inch DVI cable. 1. Plug one end of the 6-foot DVI cable into the primary port of the dual-channel DVI graphics card.
SD2320W | 8 | User's Guide Connect the power cords Two power cords shipped wi th the unit. Use only the power cords supplied with the unit. 1. Plug the 10-foot cord into the AC pow e r jack of the top monitor. Plug the 6-foot cord into the bottom monito r.
SD2320W | 9 | User's Guide Product Use Operating in 2D mode Your SD2320W unit can o perate either as a 3D stereoscopic monitor or in the standard 2D mode. There are two options to convert to 2D: • Simply turn off the power to one monitor. • Lift the mirror and slide it into the locked, upright position.
SD2320W | 10 | User's Guide Monitor Specifications Displays Size 23” diagonal (583 mm) Display type Active ma trix color TFT LCD panel Resolution 1920 x 1200 (WUXGA) Display dot 1920 x (RGB) x 1 200 Display area (mm) 495.36 x 306.60 (H x V) Pixel pitch 0.
SD2320W | 11 | User's Guide Power management This LCD monitor complies with th e VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provid es four power-saving modes through detection of a horiz ontal or vertical sync signal.
SD2320W | 12 | User's Guide System Care Monitors. Turn off the monitors before cl ea ning. Use a dry, soft cloth, clean room wiper, or compressed a ir when cleaning the LCD panel surface. A soft cloth moistened with water and/or mild detergent can be used to clean the display housing and stand.
SD2320W | 13 | User's Guide CRT Recycling If your new Planar monitor is replacin g a CRT, keep the following in mind : • If the CRT is in good working condition, con sider donating it to a school or non-profit organization. It may quali fy as a charitable tax deduction.
SD2320W | 14 | User's Guide Warning Signals Green power indicator light. Monito r has a signal and is working properly. Amber power indicator light. Monitor is in power-saving mode. LED power indicator is out. Monito r power is off. “No Input Signal” message.
Customer Service Online Support: http://planar.custhelp.com E-mail: desktopmonitors@planar.c om Telephone: 1-866-PLANAR-1 (1-866-7 52-6271) Hours: Monday to Friday, 8 A . M . to 9 P . M . Eastern Time 020-0456-00A © 2006 Planar Systems, Inc. Planar is a regi stered trademark of Planar Systems, Inc.
An important point after buying a device Planar SD2320W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar SD2320W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar SD2320W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar SD2320W you will learn all the available features of the product, as well as information on its operation. The information that you get Planar SD2320W will certainly help you make a decision on the purchase.
If you already are a holder of Planar SD2320W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar SD2320W.
However, one of the most important roles played by the user manual is to help in solving problems with Planar SD2320W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar SD2320W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
