Instruction/ maintenance manual of the product PL190M Planar
Go to page of 17
PLANAR LCD MONITOR PL190M MANUAL www.planar.com.
Important Safety Instructions Read the Safety Instructions carefully and keep it for later use. Be aware of all warnings and inst ruction signs marked on the prod ucts. When cleaning, cut off the electrical sup ply at all times. Never use liquid or aerosol detergent, use a damp rag inst ead.
Contents Note : To acce ss our Users Guide Hom epage (Page 2) at anyt ime, simply cl ick on the below Homepage ico n or use the arrow icon(s) to browse through each page . When in Homepage, c licking on your desir ed topic wi ll automatica lly open eac h page .
Getting Started Congratulations on your purcha se of this TFT LCD Monitor. Please re ad this section ca refully to get instant understanding of this product and its co rrect operations. Important! Please keep the original car ton and all packing materials for future shipping needs.
Precautions Sit at least 18"(45 cm) away from the screen when in use. Do not press on the LCD panel as it is very fragile. Do not touch the LCD panel with your bare h ands. Oil from your ski n is difficult to remove and may damage the screen.
Adjusting the Monitor Press down on the stand and gently adjust the monitor to a suitable viewing angle (see Figure below). Please note that this monito r can o nly be tilted forward to 5 degree and backward to 20 degrees. To prevent damag e to the monitor, do not press the screen over its tolerant angles.
Quick Installation Make sure the computer is turned off. Attach the female end of the power cord (Indi cation F) to the adapter (Indication E), then plug the adapter connector to the power “DC-IN (Indication A)” jack of the LCD mo nitor. When using a power cord, plug the mal e end into the wall socket.
Operations Push the power button (Indication E) on the front of the LCD monitor to turn it on. When th e power light (Indication F) turns green, the L CD is ready to use. P ush the power switch button to turn off. F E D C A B Function Keys A. Menu 1. Press this button to turn on/off the OSD (On Screen Display) main menu.
OSD Main Menu For screen adjustments, press the [Me nu] button to display the OSD (On-Screen Displ ay) Main Menu shown below. Press the [ +] or [ − ] button to scroll up or down th e menu to your required options.
COLOR Sub-Menu Under the Main Menu, select COLOR using the [+] or [ − ] button, then press [Menu] button to activate the COLOR Sub-Menu sho wn as above. Under the COLOR Sub-Menu, pres s [+] or [ − ] button to scroll up or down to your desired preset color mode.
H–POSITION Moves the screen image to the right or left. Select H-POSITION usin g the [+] or [ − ] button, then press the [Menu] button to ac tivate the function. Press [ +] button to move the screen to the right, [ − ] button to move to the left.
H-OSD POSITION Moves the OSD position on the screen to the right or left. Select H - OSD POSITION using [+] or [ − ] button, then press [Menu] button to activate the function. Press the [+] button to move the OSD position to the right, [ − ] button to move left.
Technical Data Specifications LCD Size 19.0" (full 19.0" viewable diagonal area) Type TFT (T hin Film Transistor), Active Matrix Panel Color 16.7M Glass surface Anti-Glare Brightness 250 cd/m 2 (Typ.) Contrast 500:1 (Typ.) Viewing Angle 170 ° (H) and 170 ° (V) @ CR>10 Input Signal Video RGB Analog Video Sync Sync H.
Factory Preset Timings Timing Horizontal Frequenc y (KHz ) Vertical Frequency (Hz) Sync Polarity (H/V) VGA 640 X 350 31.470 70.089 + / - VGA 720 X 400 31.467 70.082 - / + VGA 640 X 400 31.469 70.087 - / + VESA 640 X 480 31.469 59.940 - / - VESA 640 X 480 37.
Appendix FCC Information This equipment has been tested an d found to co mply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC Rule s. These limits are designed to provide reasonable pr otection against harmful in terference in a residential i nstallation.
15 3ODQDU6 VWHP V,QF Customer Service E-mail: desktopmonitors@planar .com T el: 1-866-PLANAR-1 (1-866-752-6271) Hours: M-F , 7am - 6pm Pacific T ime © 2002 Planar Systems, Inc. 07/02 Planar is a registered trademark of Planar Systems, Inc.
3ODQDU6 VWHP V,QF Customer Service E-mail: desktopmonitors@planar .com T el: 1-866-PLANAR-1 (1-866-752-6271) Hours: M-F , 7am - 6pm Pacific T ime © 2002 Planar Systems, Inc. 07/02 Planar is a registered trademark of Planar Systems, Inc.
An important point after buying a device Planar PL190M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PL190M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PL190M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PL190M you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PL190M will certainly help you make a decision on the purchase.
If you already are a holder of Planar PL190M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PL190M.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PL190M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PL190M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
