Instruction/ maintenance manual of the product LX1200TI Planar
Go to page of 29
LX1200TI Touch Monitor USER’S GUIDE www.planar .com.
2 LX1200TI User ’ s Guide (020-0512-01A) The information contained in this document is subject to change without notice . This document contains proprietary information that is protected by co p yright.
LX1200TI User ’ s Guide (020-0512-01A) 3 Table of Contents Usage Notice Pr ecautions ................................................................................................................... ..............5 In a V ehicle ..................
4 LX1200TI User ’ s Guide (020-0512-01A) Video Speci cations ......................................................................................................... 23 Electrical Speci cations ................................................
LX1200TI User ’ s Guide (020-0512-01A) 5 Usage Notice Precautions T o maximize the life and safe use of your unit, always be sure to follo w the warnings , precautions and maintenanc e recommendations in this user’ s guide.
6 LX1200TI User ’ s Guide (020-0512-01A) Introduction About Planar’s LX1200TI Touch Monitor The LX1200TI, is a high-performance, rugged touch monitor int ended for demanding environments , such as those inside motor vehicles . The monit or features a 12.
LX1200TI User ’ s Guide (020-0512-01A) 7 Fr ont V iew (Descriptions) : 1. 12.1-inch diagonal XGA screen size . 2. P rogrammable SoftKeys 3. V olume control 4.
8 LX1200TI User ’ s Guide (020-0512-01A) Bottom View (Descriptions) : 1. Brightness control dial 2. USB port ( T ype A, accessible from the front) for c onnecting a peripheral device 3. V olume contr ol dial 4. Speaker (on each side) 5. USB port ( T ype A, accessible from the front) for c onnecting a peripheral device 6.
LX1200TI User ’ s Guide (020-0512-01A) 9 Features • The brightness contr ol allows you t o easily adjust the display to match the ambient light, from full sunlight to night, even while w earing gloves . Its convenient dial design also enables y ou to quickly adjust the brightness.
10 LX1200TI User ’ s Guide (020-0512-01A) Package Overview The following items are shipped with the display . If any of these items are not in the shipping container , please contact Planar. LX1200 T ouch Monitor Quick Start Guide Po wer Input Cable SoftKey Sof tware and T ouchscreen Driver Installation CD Note: Mounting hardware (4 M4 x .
LX1200TI User ’ s Guide (020-0512-01A) 11 Installation Before Installing Keep the following in mind while installing the monit or . • The monitor should be visible to the driver only if it is used f or na vigation, system contr ol or vehicle information.
12 LX1200TI User ’ s Guide (020-0512-01A) Step 1 - Mounting the Monitor The back of the LX1200TI includes a mounting interface that you can use to mount the monitor on a swing arm or other L CD monitor xture, as follo ws. 1. Mount the x ture in its planned location acc ording to the instructions included with the xture.
LX1200TI User ’ s Guide (020-0512-01A) 13 Step 2 - IRtouch Install Do not plug in the touchscreen y et! Install the driver rst. 1. Run IRtouch driver setup from the LX1200TI CD 2.
14 LX1200TI User ’ s Guide (020-0512-01A) 4. Click Install 5. Click continue, y ou can trust Planar and IRtouch 6. Click on F inish Attach the Planar monitor to the sy stem or install the computer to a docking station.
LX1200TI User ’ s Guide (020-0512-01A) 15 7. Continue 8. Click F inish 9. Click the IRtouch icon located on your desktop to calibrate the t ouch monitor .
16 LX1200TI User ’ s Guide (020-0512-01A) 11. Set Modes When used in rugged environments with software written f or touchscreens , you may nd it easier to use the ‘ click on release’ radio button. 12. Beep Y ou can set the computer t o beep on touch activation if needed.
LX1200TI User ’ s Guide (020-0512-01A) 17 Step 3 - Connecting the Monitor Once the LX1200TI is mounted in place , connect it to the computer (or other video source) and the 12 VDC power supply as follow s. 1. As needed, r oute any data and pow er cables from the computer t o the monitor .
18 LX1200TI User ’ s Guide (020-0512-01A) Note: If needed, connect an audio cable to the audio por t on the monitor , and to the headphone or audio line output connector on the computer . If an external keyboard or other USB device will be used with the monitor , plug it into either of the monitor ’ s Type A USB c onnectors.
LX1200TI User ’ s Guide (020-0512-01A) 19 User Controls Front Panel Controls CONTROL FUNCTION V olume Control Dial Increases and decreases the volume of the display Po wer Button T urns the connected computer on and o - see page 20 for details.
20 LX1200TI User ’ s Guide (020-0512-01A) Turning the Monitor On and Off The monitor’ s power button controls po wer to the comput er . The monitor itself turns its display on and o according to whether it is r eceiving a video signal. • T o turn on the computer , press the remote PC shut down/start button on the fr ont of the monitor .
LX1200TI User ’ s Guide (020-0512-01A) 21 Cleaning the Monitor Clean the monitor’ s touchscreen periodically to keep the display image bright and sharp, and t o keep the touchscreen functions working properly . • Always turn o the monitor before cleaning .
22 LX1200TI User ’ s Guide (020-0512-01A) Appendix Troubleshooting the Monitor If you are experiencing trouble with the LX1200TI monit or , refer to the following . If the problem persists, please contact your local dealer or our ser vice cent er . Problem: No image appears on scr een • Make sure the brightness is not turned all the way down.
LX1200TI User ’ s Guide (020-0512-01A) 23 Specifi cations Dimensions • Size: 313mm (12.3”) width x 267mm (10.5”) height x 46mm (1.8”) thickness • Screen Size: 12.
24 LX1200TI User ’ s Guide (020-0512-01A) Electromagnetic Compatibility (EMC) • ESD , 6 kV contact and 8 kV air discharge • Emissions • 47 CFR.
LX1200TI User ’ s Guide (020-0512-01A) 25 Environmental Specifi cations T emperatur e • Opera ting: -20° to 60° C • Operating Survival: -25° to 65° C • Storage: -20° to +70° C Humidity .
26 LX1200TI User ’ s Guide (020-0512-01A) • J5: DC Po wer Input • Chassis-mounted , two-pin connector (Molex M ini F it Jr ., Header 5569 M olex par t number 39-30-0020) • The table belo w lists the connector ’ s pin assignments, and the gure below shows the physical la yout as seen by the interface cable from the DC power source.
LX1200TI User ’ s Guide (020-0512-01A) 27 Addendum A Planar Softkey Use The Planar LX1200TI has built in programmable function buttons . This docu- ment is to guide the user on the use and installation of the softkey soft ware .
28 LX1200TI User ’ s Guide (020-0512-01A) 2. Agr ee to the software license agreement. 3. The software will install a link on your desktop , on the bottom right Window s noti cation area, and on the star t menu. The sof tware will install with a default con guration.
Planar Sy stems, Inc. Customer Service 24x7 Online T echnical Support: http://w ww .planar .com/suppor t Email: PlanarSupport@planar .com Americas Support 1195 NW Compton Drive Beaverton, OR 97006-199.
An important point after buying a device Planar LX1200TI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar LX1200TI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar LX1200TI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar LX1200TI you will learn all the available features of the product, as well as information on its operation. The information that you get Planar LX1200TI will certainly help you make a decision on the purchase.
If you already are a holder of Planar LX1200TI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar LX1200TI.
However, one of the most important roles played by the user manual is to help in solving problems with Planar LX1200TI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar LX1200TI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
