Instruction/ maintenance manual of the product AT-HD30SR Atlona
Go to page of 2
Introduction: The A T -HD30SR is designed to replace long runs of HDMI cable with CA T5E/6 cable( also called Ethernet, or LAN ca- ble). (Atlona recommends using CA T6 cable for all extender products) This product is capable of extending 1080p signal from any HDMI or DVI source up to 30 Meters (99 ft.
Installation Instructions: 1. Cut and terminate two CA T5e/6 to desired length, or use pre-terminated cables. 2. Connect one end of each CA T5E/6 cable to the Sender unit labeled “HDMI IN” Note: keep track of which cable is inserted into each CA T5E/6 port as they will need to match on the Receiver side 3.
An important point after buying a device Atlona AT-HD30SR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlona AT-HD30SR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlona AT-HD30SR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlona AT-HD30SR you will learn all the available features of the product, as well as information on its operation. The information that you get Atlona AT-HD30SR will certainly help you make a decision on the purchase.
If you already are a holder of Atlona AT-HD30SR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlona AT-HD30SR.
However, one of the most important roles played by the user manual is to help in solving problems with Atlona AT-HD30SR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlona AT-HD30SR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
