Instruction/ maintenance manual of the product PXDX-KD AAMP of America
Go to page of 20
Instr uction Manual Peripheral Electronics®, a division of AAMP of America™ 13160 56th Court Clearwater , Florida 33760 866-788-4237 in the US or 727-572-9255 ext.262 for international calls support@peripheralelectronics.com ©2006 AAMP™ of Florida, Inc.
T a ble of Contents Pages CHAPTER 1- Getting Star ted 1.1 Introduction 1 1.2 Precautions 1 1.3 Conguration & Harnesses 2 1.4 Compatibility Notes 2-3 1.5 Application Guide 4-9 1.6 Programming the Audio2car 10 CHAPTER 2- General Installation 2.1 Installation Location 1 1 2.
Chapter 1- Getting Star ted 1.1 Intr oduction Thank you for purchasing Peripheral Electronics’® Audio2car interface. The Audio2car is designed to provide endless hours of listening pleasure through most vehicles’ factory radios.
2 1.3 Conguration and Har ness Selection This section will instruct you on how to properly identify and/or conrm the proper in - terface dip-switch conguration and vehicle specic harness selection. On the follow - ing pages you will nd our vehicle application guide.
1.4.5 DODGE - See Chrysler 1.4.4 1.4.6 EAGLE - See Chrysler 1.4.4 1.4.7 FORD- The Audio2car is not compatible with factory radios with built-in 6-disc CD changers. 1.4.8 GMC- See Chevrolet 1.4.3 1.4.9 HONDA- Starting in 2003 Honda introduced a new series of radios that use different software that is currently incompatible with the Audio2car .
1.5 APPLICA TION GUIDE ASIAN IMPORT visit www .peripheralelectronics.com/apps for the latest application information 4 Manufacturer / Fabricant Model / Modèle Year / Année Harness Configuration Inte.
5 1.5 APPLICA TION GUIDE FORD visit www .peripheralelectronics.com/apps for the latest application information Manufacturer / Fabricant Model / Modèle Year / Année Harness Configuration Interface Lo.
6 1.5 APPLICA TION GUIDE CHR YSLER visit www .peripheralelectronics.com/apps for the latest application information Manufacturer / Fabricant Model / Modèle Year / Année Harness Configuration Interfa.
7 1.5 APPLICA TION GUIDE CHR YSLER CONT . visit www .peripheralelectronics.com/apps for the latest application information EURO-IMPORT Manufacturer / Fabricant Model / Modèle Year / Année Harness Co.
1.5 APPLICA TION GUIDE GM VEHICLES visit www .peripheralelectronics.com/apps for the latest application information 8 Manufacturer / Fabricant Model / Modèle Year / Année Harness Configuration Inter.
1.5 APPLICA TION GUIDE GM VEHICLES CONT . visit www .peripheralelectronics.com/apps for the latest application information 9 Manufacturer / Fabricant Model / Modèle Year / Année Harness Configuratio.
TOP VIEW 1 2 3 4 5 6 7 8 DIP ON DIN CONNECTOR / DIP SWITCH VIEW 22-PIN HARNESS VIEW 1.6 Prog r amming the Audio2car Now that you have identied the correct harness and dip-switch conguration us - ing the application guide, it is now time to program the interface.
2.1 Installation Loca tion Most installations will require you to remove the factory radio in order to plug in the vehicle specic harness. Some vehicles may require you to connect the interface to a factory pre- run CD changer cable. The location of these CD changer cables will vary by vehicle.
12 voltmeter . With the key OFF and the negative test lead of the voltmeter rmly touching a bare metal chassis part of your car , begin probing the wires in the main radio harness with the positive test lead. The constant 12V+ circuit should read a continuous 12 volts or higher .
13 6. Secure the interface in the vehicle using; double sided tape, V elcro or wire ties. Make sure to check for proper clearance and avoid moving parts. T ake into account the size of the interface and the wire harness and do not force the interface and harness into a space that is too tight, damage to the harness may result.
3.1 Operation SELECTING THE AUDIO DEVICE T o select the mobile device from the radio, press the button that would normally activate the factory CD changer .
Symptom Cause Remedy No Power Blown fuse in vehicle fuse block. Replace fuse with same amp rating. If the fuse blows again, call tech support. No Power Bad connection Check cable and wiring connection.
16 3.3 War r anty One Y ear Limited W arranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized Peripheral Elecronics dealer .
.
Peripheral Electronics®, a division of AAMP of America™ 13160 56th Court Clearwater , Florida 33760 866-788-4237 in the US or 727-572-9255 ext.262 for international calls support@peripheralelectronics.
An important point after buying a device AAMP of America PXDX-KD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AAMP of America PXDX-KD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AAMP of America PXDX-KD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AAMP of America PXDX-KD you will learn all the available features of the product, as well as information on its operation. The information that you get AAMP of America PXDX-KD will certainly help you make a decision on the purchase.
If you already are a holder of AAMP of America PXDX-KD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AAMP of America PXDX-KD.
However, one of the most important roles played by the user manual is to help in solving problems with AAMP of America PXDX-KD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AAMP of America PXDX-KD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
