

Supplies:

Supplies:
twice the height you would like the finished tassel to be (Suggestion:
an empty fabric bolt).

around the cardboard approximately 100 times. Depending on how
thick you want the tassel to be, you may want to wrap more or less
times around the board. Snip thread from spool.
with the wrapped threads and snip through all strands.
about the width of your cardboard with a loop on one end and the cut
ends on the other.
machine in free motion position with the feed dogs down.
Using the same thread, stitch back and forth over the middle third of
the thread bundle until all threads are wrapped tightly together.
wrapped loop on one end and the loose threads on the other.
tassel together. Use your judgment here- leave as much fringe and
your loop as large as you would like.

loose threads. Finally, trim all thread ends to the same length and your
Fringed Tassel is complete.
Please note these directions were made using a rayon decorative thread. If you are using cotton thread,
you will probably not need to wrap as many times as the cotton thread is much thicker.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.