Instruction/ maintenance manual of the product TW3004AR Pelco
Go to page of 20
INST ALLA TION TW3004AR Active Receiver Four Channels for UTP T ransmission C1667M (6/06).
.
C1667M (6/06) 3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
4 C1667M (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1667M (6/06) 5 Description The TW3004AR is a four-channel active receiver that can receive live video over unshielded twisted pair (UTP) cable. The adaptive technology in the TW3004AR automatically adjusts the low , medium, and high frequency components of the video signal, allowing for the best possible video transmission.
6 C1667M (6/06) PARTS OF THE RECEIVER v Figure 1. TW3004AR Parts Rubber Feet (4): For placing unit on a fl at surface, such as a desk or shelf. Status LEDs (4): Light red when there is no UTP video being received. Light green when there is UTP video being received.
C1667M (6/06) 7 Installation The following parts are supplied: 1 Universal power supply (Part #PS04-1502-0512G) 1 Wall clip with screws and washers 1 Power connector 2-pin 1 UTP mating connector 1 Scr.
8 C1667M (6/06) USING A WALL CLIP To attach the TW3004AR receiver to a wall using the supplied wall clip, refer to Figure 2 and do the following: 1. Attach the wall clip to a wall using two screws (not supplied).
C1667M (6/06) 9 SETTING THE DIP SWITCHES The factory default switch positions are shown in Figure 3. Switches 2-5 are set to auto and switch 1 is set to H mode.
10 C1667M (6/06) APPLICATIONS Y ou can connect the TW3004AR active receiver to transmitters, such as the TW3001P passive transceiver , and the TW3001A T active transmitter, and to Pelco UTP cameras, such as the CC3710/ CC3610 series.
C1667M (6/06) 11 Figure 4 shows a TW3004AR connected to a UTP camclosure. Figure 4. TW3004AR Connected to a UTP Camclosure = = 12 VDC OR 24 V AC POWER SUPPLY GRAY WIRE BLUE WIRE UTP POWER FROM RK5000P.
12 C1667M (6/06) Figure 5 shows a TW3004AR connected to a UTP fi xed camera. Figure 5. TW3004AR Connected to a UTP Fixed Camera - + POWER FROM RK5000PS-3U 12 VDC OR 24 V AC POWER SUPPLY FIXED CAMERA .
C1667M (6/06) 13 Figure 6 shows a TW3004AR connected to a UTP Spectra ® dome for Coaxitron PTZ control. Figure 6. TW3004AR Connected to a Spectra Dome 12 VDC OR 24 V AC POWER SUPPLY POWER FROM RK5000.
14 C1667M (6/06) Figure 7 shows a TW3004AR connected to a TW3001P passive transceiver . The TW3001P then connects to a non-UTP fi xed camera. Figure 7.
C1667M (6/06) 15 Figure 8 shows a TW3004AR connected to a TW3032P passive transceiver . Figure 8. TW3004AR Connected to a 32-Channel Passive Transceiver 12 VDC OR 24 V AC POWER SUPPLY POWER FROM RK500.
16 C1667M (6/06) Figure 9 shows a TW3004AR connected to a TW3004P passive transceiver . The TW3004P then connects to a non-UTP fi xed camera. Figure 9.
C1667M (6/06) 17 Specifications ELECTRICAL Input Voltage 12 VDC or 24 VAC, 50/60 Hz Power Consumption 10 watts Wire T ype Unshielded twisted pair (24 AWG minimum) Wire Category Cat3 or better DC Loop.
18 C1667M (6/06).
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco TW3004AR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco TW3004AR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco TW3004AR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco TW3004AR you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco TW3004AR will certainly help you make a decision on the purchase.
If you already are a holder of Pelco TW3004AR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco TW3004AR.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco TW3004AR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco TW3004AR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
