Instruction/ maintenance manual of the product ICS150 Pelco
Go to page of 8
PC Board Retrofit Kit for ICS100 and ICS150 C2405M (8/02) ® INST ALLA TION MANUAL ICS-KITRETRO.
2 C2405M (8/02) INTRODUCTION Previous models of the ICS100/ICS150 back box are not compatible with the latest Camclosure ™ camera module. T o install the camera module, use the ICS-KITRETRO kit and modify the back box. There are two methods of installation: • The video coaxial cable is accessible and can be pulled into the back box.
C2405M (8/02) 3 CABLE IS ACCESSIBLE Tu rn off power to the ICS100/ICS150. Remove the lower dome and camera module. Remove the PC board from the base of the unit. Pull the video coaxial cable into the back box. Install the new board inside the back box.
4 C2405M (8/02) Reposition the board and attach it to the base using one of the screws removed in step 1. Tu rn off power to the ICS100/ICS150. Remove the lower dome and camera module. Remove the PC board from the base of the back box. Do not discard the screws.
C2405M (8/02) 5 ICS100 Installation ICS150 Installation Install the new board inside the back box. Note: The BNC connector attached to the board is not required for the installation. Either push the video cable into the conduit or cut the cable and remove it.
6 C2405M (8/02) MALE CONNECTOR FROM NEW BOARD FEMALE VIDEO CONNECTOR (OLD BOARD) VIDEO CONNECTOR HEATER CONNECTOR POWER TERMINAL VIDEO CONNECTOR HEATER CONNECTOR 24 VAC JUMPER 24 VDC JUMPER Connect the camera video and heater connectors to the board.
C2405M (8/02) 7 W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco ICS150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ICS150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ICS150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ICS150 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ICS150 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ICS150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ICS150.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ICS150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ICS150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
