Instruction/ maintenance manual of the product ICIMI1000 Pelco
Go to page of 16
ICIMI1000 Inter face Cable Installation/ Operation Manual C 1014M -B ( 10 /97) ® Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.
16 Pelco Manual C1014M-B (10/97) ii CONTENTS Section Page 1.0 GENERAL .................................................................................................. 1 1.1 IMPORT ANT SAFEGUARDS AND WARNINGS ............................... 1 1.2 UNP ACKING INSTRUCTIONS .
Pelco Manual C1014M-B (10/97) 1 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed.
2 Pelco Manual C1014M-B (10/97) 1.2 UNP ACKING INSTRUCTIONS Unpack and inspect all parts carefully . The following items are supplied: 1 ICIMI1000 Interface Cable 1 Installation/Operation Manual (C1014M-B) 1 Interface Extension Cable Be sure to save the shipping carton, boxes and inserts.
Pelco Manual C1014M-B (10/97) 3 2.0 DESCRIPTION The information in this manual covers the installation and operation of the Inter-Check ® ICIMI1000 Interface Cable with the following systems: Gilbarc.
4 Pelco Manual C1014M-B (10/97) 3.0 INST ALLA TION FOR CASH REGISTERS This section covers the installation of the ICIMI1000 interface cable with the Gilbarco TCR/15 and “G-Site”; Koppens/Schlumberger Micromax 1000, 2000, 3000 Pro; Suntronics Station Minder 890, 960, 2000; and V erifone Ruby Super System cash registers.
Pelco Manual C1014M-B (10/97) 5 To define communication parameters for baud rate, type in the appropriate data and press “ENT” to save. T o define all the other communication param- eters, type the appropriate data for each parameter .
6 Pelco Manual C1014M-B (10/97) 3.2.2 Procedur es for the Gilbarco “G-Site” Cash Registers The following procedures are to be performed on the Gilbarco “G-Site” Cash Reg- isters: 1. Use the 8-pin modular adapter supplied with the ICIMI1000 when interfacing to this register .
Pelco Manual C1014M-B (10/97) 7 3.2.4 Procedures for the Suntr onics Station Minder 890, 960, and 2000 Cash Registers The following procedures are to be performed on the Suntronics Station Minder 890, 960, and 2000 Cash Registers 1. Be sure the cables on the wiring kit are connected to the yellow and black terminals only .
8 Pelco Manual C1014M-B (10/97) 5. V erifone uses the Epson Model TM930II as the standard printer on this regis- ter . If you are using the Epson Model TM950II printer , with 9-pin “D” style connector , you will need to use the Pelco ICIDRP interface cable.
Pelco Manual C1014M-B (10/97) 9 Figure 1. Wiring Diagram for One Cash Register or One A TM Machine Figure 2. Wiring Diagram for T wo Cash Registers or T wo A TM Machines STRAIGHT THROUGH PHONE CABLE T.
10 Pelco Manual C1014M-B (10/97) 4.0 INST ALLA TION FOR A TM MACHINES This section covers the installation of the ICIMI1000 interface cable with the Diebold, IBM, and NCR A TM machines. 4.1 INTER-CHECK ® PREP ARA TION 1. Check to see if Pelco supports the communication protocol your A TM is run- ning.
Pelco Manual C1014M-B (10/97) 11 Figure 3. A TM Machine Interface Cable Installation A TM MACHINE A TM NETWORK MODEM PLACE INTERF ACE CABLE HERE (ICIMI1000).
12 Pelco Manual C1014M-B (10/97) 4.3 INTER-CHECK ® PROGRAMMING 1. Select the appropriate communication protocol your A TM is using. Refer to your Inter-Check ® manual for a complete explanation on proper programming. 2. Set the A TM device addresses to “00”.
Pelco Manual C1014M-B (10/97) 13 5.0 SPECIFICA TIONS GENERAL Environment: Indoor Operating Temperature: 32 ° to 120 ° F (0 ° to 49 ° C) Weight Unit Shipping 0.
14 Pelco Manual C1014M-B (10/97) 6.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1997, Pelco. All rights reserved.
An important point after buying a device Pelco ICIMI1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ICIMI1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ICIMI1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ICIMI1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ICIMI1000 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ICIMI1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ICIMI1000.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ICIMI1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ICIMI1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
